Datasheet Panel Mount DC60 Series • Ratings from 3 A to 7 A @ 60 VDC • AC and DC control • Bi-polar transistor output • Epoxy Free Design • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 3 A 5 A 7 A 3.5-32 VDC DC60S3 DC60S5 DC60S7 90-280 VAC/VDC DC60SA3 DC60SA5 DC60SA7 AVAILABLE OPTIONS Termination Blank: Screws & clamps Control Voltage K: Installed standoffs with Output Type S: 3.5-32 VDC screws for PC Board Blank: Normally Open Series SA: 90-280 VAC/DC mounting (1) -B: Normally Closed (for DC control only) DC60 SA 3 K H -B Rated Load Current Thermal Pad 3: 3 Amps Blank: Not Included 5: 5 Amps H: Included Required for valid part number 7: 7 Amps For options only and not required for valid part number * Not all part number conbinations are available. Contact Crydom Technical Support for information on the availability of a specific part number. OUTPUT SPECIFICATIONS (2) Description 3 A 5 A 7 A Recommeded Operating Voltage [Vdc] 3-48 3-48 3-48 Absolute Maximum Rating [Vdc] 60 60 60 Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.1 0.1 0.1 Maximum Load Current [Adc] (3) 3 5 7 Minimum Load Current [mA] 20 20 20 Maximum Surge Current (10 msec)[Adc] 6 10 14 Maximum On-State Voltage Drop @ Rated Current [Vdc] 1 1.2 1.3 Thermal Resistance Junction to Case (Rjc) [°C/W] 2 2 2 Minimum heat sink @ Ambient (for max current= °C/W & Ta) 5 @ 60°C 5 @ 60°C 5 @ 40°C INPUT SPECIFICATIONS (2) Description DC Control AC Control Control Voltage Range 3.5-32 VDC 90-280 VAC/VDC Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage (4) 3.5 VDC 90 VAC/VDC Must Turn-Off Voltage (5) 1 VDC 10 VAC/VDC Minimum Input Current (for on-state) 2.2 mA 2 mA Maximum Input Current 25 mA 5.5 mA Nominal Input Impedance [Ohms] 1500 60K Maximum Turn-On Time [msec] (6) 0.1 10 Maximum Turn-Off Time [msec] (7) 0.3 40 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount GENERAL SPECIFICATIONS(2) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/”K” option 8-10 / 0.9-1.13 Humidity 85% non-condensing MTBF (Mean Time Between Failures) at 40°C ambient temperature (8) 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 60°C ambient temperature (8) 11,545,504 hours (1,317 years) WIRING DIAGRAM * Inductive loads must be diode suppresed. - + + V Load * * Load V + + - Recommended Wire Sizes Terminals Wire Size Wire Pull-Out (Solid / Stranded) Strength (lb)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] +1 OUTPUT 2 +1 OUTPUT 2 Input 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] SOLID STATE RELAY SOLID STATE RELAY 20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133] 4 INPUT +3 4 INPUT +3 Output 2 x 10 AWG (5.3 mm2) / 5.3 110 [490] 2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400] + + V V - - Input Current vs Input Voltage Standard Regulated DC Input EQUIVALENT CIRCUIT BLOCK DIAGRAMS 25 DC60 Series DC Control mA) 20 nt ( 15 e +DC 3 1 +DC urr C 10 ut p UT Control Trigger In 5 NP Circuit Circuit I 0 0 5 10 15 20 25 30 35 DC Input Voltage -DC 4 2 -DC Input Current vs Input Voltage Standard Regulated AC Input 5 DC60 Series AC Control 4.5 4 AC/DC 3 1 +DC mA)3.5 nt ( 3 UT AC/DC Trigger Curre2.25 INP Converter Circuit Input 1.15 0.5 AC/DC 4 2 -DC 0 0 50 100 150 200 250 300 AC Input Voltage Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount MECHANICAL SPECIFICATIONS(1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination Hex Standoff Termination (“K” Option)(1) 1.1 0.89 1.1 1.04 [27.9] Mounting [22.6] [27.9] Mounting [26.4] 0.49 Hole/Slot 0.49 Hole/Slot (2 places) [12.4] 0.19 [4.9] [12.4] 0.19 [4.9] DIA. DIA. +1 OUTPUT 2 +1 OUTPUT 2 1.88 SOLID STATE RELAY 1.7 2.25 1.88 SOLID STATE RELAY 1.7 2.25 [47.6] [43.2] [57.3] [47.6] [43.2] [57.3] 4 INPUT +3 4 INPUT +3 1.0 1.0 0.93 [25.4] [25.4] [23.6] 1.75 1.75 (4 places) [44.5] [44.5] 1.0 [25.4] (2 places) GENERAL NOTES (1) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm). (2) All parameters at 25°C unless otherwise specified. (3) Heat sinking required, see derating curves. (4) Maximum turn-on voltage for -B, DC control is 1 VDC. (5) Must turn-off voltage for -B, DC control is 3.5 VDC. (6) Turn-on time for -B version is 300µsec. (7) Turn-off time for -B version is 100µsec. (8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). (9) For single surge pulse Tc=25°C; Tj=150°C. For additional information or specific questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount SURGE CURRENT INFORMATION Single Pulse (9) DC60Sx3 DC60Sx5 20 20 p) 15 mp) 15 m A urrent (A 10 Current ( 10 e C ge urg 5 Sur 5 S 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) DC60Sx7 20 p) 15 m A ent ( 10 urr C e urg 5 S 0 0.1 1 10 100 1000 Surge Duration (msec) THERMAL DERATE INFORMATION (i) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. DC60Sx3 DC60Sx5 5°C/W No Heat Sink(i) 5°C/W No Heat Sink(i) 3 5 ps)2.5 ps) 4 m m A 2 A ent (1.5 ent ( 3 urr urr 2 C 1 C d d Loa0.5 Loa 1 0 0 20 30 40 50 60 70 80 20 30 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) DC60Sx7 5°C/W No Heat Sink(i) 7 ps) 6 m 5 A nt ( 4 e urr 3 C d 2 a Lo 1 0 20 30 40 50 60 70 80 Ambient Temperature (ºC) Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount AGENCY APPROVALS Agency Approvals EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: E116950 ACCESORIES Recommended Accessories New Accessories! Protective Cover & Hardware Kits Protective Cover Cover Hardware Heat Sink Thermal Resistance Lug Terminal Thermal Pad Part number: KS101 Kit Part No. [ºC/W] Clear plastic cover compatible with all new S1 designs. Safety covers provide added KS101 HK1 HS501DR 5.0 TRM1 HSP-1 protection from electric shock when HK4 HS301 / HS301DR 3.0 TRM6 HSP-2 installing or checking equipment. HS251 2.5 HS201 / HS201DR 2.0 Hardware Kit HS202 / HS202DR 2.0 Part number: HK4 HS172 1.7 Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount HS151 / HS151DR 1.5 TMR1 lug terminals. HS122 / HS122DR 1.2 HS103 / HS103DR 1.0 HS101 1.0 HS073 0.7 HS072 0.7 HS053 0.5 HS033 0.36 HS023 0.25 Rev. 060216 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor prima di lavorare con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima Failure to follow olace avant de überprüfen dell’accensione these El mettre sous und alle instructions will incumplimiento Abdeckungen L'omissione di result in death de estas De non-suivi de ersetzen. queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: DC60SA5 DC60SA3 DC60S3 DC60S5 DC60S7 DC60S5-B DC60S7-B DC60S3-B DC60SA7 DC60SA3H