Moisture Barrier Bag Dri-Shield® 3400 Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, Static Control Bag ANSI/ESD S11.4 Level 1, and IPC/JEDEC J-STD-033. This foil moisture barrier bag is designed to provide protection for ESD Physical Typical Value Testing Method sensitive and moisture sensitive electronics, typically SMT (Surface Mount Technology) items. Best practice is to use with Desiccant and a Moisture Vapor < 0.0003 grams/100 sq. in./24 hrs ASTM F1249 Humidity Indicator Card. The bags are heat sealable and suitable for Transmission Rate < 0.002 grams/100 sq. in./24 hrs ASTM F392 condition E and (MVTR) ASTM F2149 vacuum packaging. Bags are printed with ESD protective and moisture sensitive warning symbols, and a lot code for traceability. Tensile Strength 6000 PSI, 41 MPa ASTM D882 Puncture Resistance 20 lbs, 88 N MIL-STD-3010 Method 2065 SCS Moisture Barrier Bags Dri-Shield® 3400 are manufactured from a Seal Strength 15 lbs, 66 N ASTM D882 laminate of polyester, foil, and polyethylene. The metal layer is intended to provide discharge shielding and to minimize the penetration of electric Thickness 4 mils, 0.1016 mm +/-10% MIL-STD-3010 Method 1003 fields and electrosOtaptiecn d iTscohpa rBgaegs . ZipTop Bag Marking Adhesion Pass IPC-TM-650 2.4.1 Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 Surface Resistance - 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Interior Surface Resistance - 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Exterior Tolerance: Width -0, +1/4" EMI Attenuation 45 dB 1 to 10 GHz Length +/- 1/8" Offset 0 to 1/4" Seal width 3/8" with a tolerance of +/- 1/8" Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Note: Standard bag markings shown above are not to scale. Heat Sealing Conditions Typical Value Temperature 400°F, 204°C Time 0.6 – 4.5 seconds Pressure 30 – 70 PSI, 206 – 482 KPa Bag is free of amines, silicones and heavy metals. Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 This product is intended for commercial use only. This product is not on the Qualified Product Seal width +/- 0.125 Listing under the Defense Standardization Program. NOTE: The complete dry package concept of packaging for electronics requires three elements: Moisture Barrier Bags - To Protect Desiccants - To Absorb Moisture SCS Moisture Barrier Bags are packaged in a polyethylene bag. Humidity Indicator Cards - To Monitor Performance RoHS, REACH, and Conflict Minerals Statement See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: Made in the United States of America with Globally Sourced Materials. DescoIndustries.com/ROHS3.aspx Specifications and procedures subject to change without notice. See the SCS Limited Warranty: StaticControl.DescoIndustries.com/Limited-Warranty.aspx DRI-SHIELD® 3400 MOISTURE BARRIER BAG 926 JR Industrial Drive, Sanford, NC 27332 DRAWING DATE WEB SITE: StaticControl.com NUMBER September PHONE (919) 718-0000 Dri-Shield® 3400 2019 © 2019 DESCO INDUSTRIES INC Employee Owned

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: D esco: D341012 D341824 S CS: D341020 D341030 D341618