End of Life July 2020 CPCC, CPCF High Volume www.vishay.com Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Vertical Mount FEATURES • Space saving • Direct mounting on printed circuit board • High power to size ratio • Special cement potting compound and ceramic case provide high thermal conductivity in a fireproof package • Material categorization: for definitions of compliance please se e www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING RESISTANCE RANGE RESISTANCE RANGE WEIGHT TOLERANCE GLOBAL MODEL P40 °C   ± % (typical) W WIREWOUND METAL OXIDE g CPCC02 2 0.1 to 100 n/a 5, 10 4.7 CPCF02 2 n/a 101 to 50K 5, 10 4.7 CPCC03 3 0.1 to 100 n/a 5, 10 5.5 CPCF03 3 n/a 101 to 50K 5, 10 5.5 CPCC05 5 0.1 to 100 n/a 5, 10 6.9 CPCF05 5 n/a 101 to 50K 5, 10 6.9 CPCC07 7 0.1 to 100 n/a 5, 10 9.2 CPCF07 7 n/a 101 to 50K 5, 10 9.2 CPCC10 10 0.1 to 100 n/a 5, 10 14.3 CPCC1A 10 0.1 to 100 n/a 5, 10 13.2 TECHNICAL SPECIFICATIONS PARAMETER UNIT CPCC, CPCF HIGH VOLUME RESISTOR CHARACTERISTICS Temperature Coefficient ppm/°C ± 400 Short Time Overload - 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C -65 to +275 for wirewound, -65 to +225 for metal oxide Terminal Strength lb 10 minimum Dielectric Withstanding Voltage V 1000 AC GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CPCC0515R00JE66 C P C C 0 5 1 5 R 0 0 J E 6 6 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical R = decimal J = ± 5.0 % E66 = lead (Pb)-free bulk pack (Dash number) Specifications Global K = thousand K = ± 10.0 % (Up to 3 digits) Model column for R1500 = 0.15  From 1 to 999 options) 1K500 = 1500  as applicable Revision: 05-Feb-2020 1 Document Number: 30116 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

End of Life July 2020 CPCC, CPCF High Volume www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] DIMENSIONS in inches [millimeters] GLOBAL H W L LD CC MODEL ± 0.060 ± 0.040 ± 0.040 ± 0.002 + 0.08 / - 0.04 [1.5] [1.0] [1.0] [0.05] [+ 2 / - 1] 0.787 0.433 0.138 0.031 0.197 H CPCC02 [20] [11] [3.5] [0.8] [5] 0.787 0.433 0.138 0.031 0.197 CPCF02 [20] [11] [3.5] [0.8] [5] 0.984 0.472 0.315 0.031 0.197 LD 0.138 ± 0.040 CPCC03 [25] [12] [8] [0.8] [5] [3.5 ± 1] 0.984 0.472 0.315 0.031 0.197 CC CPCF03 [25] [12] [8] [0.8] [5] 0.984 0.512 0.354 0.031 0.197 W CPCC05 [25] [13] [9] [0.8] [5] 0.984 0.512 0.354 0.031 0.197 L CPCF05 [25] [13] [9] [0.8] [5] 1.535 0.512 0.354 0.031 0.197 CPCC07 [39] [13] [9] [0.8] [5] 1.535 0.512 0.354 0.031 0.197 CPCF07 MATERIAL SPECIFICATIONS [39] [13] [9] [0.8] [5] Part Marking: Dale, model, wattage, value, tolerance, date CPCC10 1.378 0.630 0.472 0.031 0.295 [35] [16] [12] [0.8] [7.5] code 2.008 0.512 0.394 0.029 0.197 CPCC1A [51] [13] [10] [0.75] [5] CPCC Element: copper-nickel alloy or nickel-chrome alloy , DERATING depending on resistance value Core: alumina ceramic % 120 N Body: steatite ceramic case with cement potting compound R I 100 End Caps: tin plated steel WE 80 O Terminals: tinned copper P D 60 E T A Wirewound CPCF R 40 Element: nickel oxide 20 Metal oxide Core: alumina ceramic 0 Body: steatite ceramic case with inorganic potting -65 -25 25 75 125 175 225 275 compound 40 AMBIENT TEMPERATURE IN °C End Caps: brass alloy Terminals: tinned copper PERFORMANCE CPCC, CPCF TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock -55 °C to +275 °C (+225 °C for metal oxide), 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS for 1 min ± (2.0 % + 0.05 ) R Low Temperature Operation -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (10.0 % + 0.05 ) R Terminal Strength 5 s to 10 s 10 pound pull test ± (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder up to body ± (4.0 % + 0.05 ) R Revision: 05-Feb-2020 2 Document Number: 30116 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000