Wire Wound Magnetically Shielded SMD Power Inductor ASPI-2010 ASPI-2010 series Pb RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm FEATURES: APPLICATIONS: • Small size and low profile: 1.0mm • Mobile phones • Small DCR and high rated current • MP3 & 4 and other portable communication equipment • High reliability to mechanical stress • Digital cameras. • Magnetically shielded by magnetic powder molding • Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: ASPI-2010 Series Operating Temperature & Humidity: -40˚C ~ +125˚C (including self heating) Storage Temperature & Humidity: -10˚C ~ +40˚C and 70% R.H. max. Part Number Temperature Temperature ASPI-2010- DC Resistance DC Resistance Saturation Saturation Inductance L Tolerance Rise Current Rise Current Inductance Typ Max Current Typ Current Max Typ Max Code Units μH − Ω Typ Ω Max A Typ A Max A Typ A Max Symbol L M DCR Isat Irms ASPI-2010-R47 0.47 M 0.049 0.059 2.30 2.85 2.35 2.60 ASPI-2010-R68 0.68 M 0.063 0.076 1.95 2.45 2.05 2.25 ASPI-2010-1R0 1.0 M 0.095 0.114 1.65 1.85 1.45 1.60 ASPI-2010-1R5 1.5 M 0.145 0.174 1.35 1.65 1.25 1.40 ASPI-2010-2R2 2.2 M 0.220 0.264 1.20 1.45 1.10 1.20 ASPI-2010-3R3 3.3 M 0.279 0.335 0.90 1.05 0.88 0.98 ASPI-2010-4R7 4.7 M 0.399 0.479 0.70 0.85 0.74 0.82 ASPI-2010-6R8 6.8 M 0.680 0.816 0.60 0.70 0.52 0.58 Test Conditions: a. Ambient Temperature: 20± 15oC b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa Inductance (L): WK3260B LCR meter or equivalent, 1MHz Direct Current Resistance (DCR): HIOKI 3540 or equivalent Saturation Current (Isat): WK3260B LCR meter or equivalent Isat: Based on inductance change (∆L/Lo ≈ -30%) Temperature rise current (Irms): Electric Power, Electric current meter, Thermometer Irms: Based on temperature rise (∆ T : 40 oC TYP. ) Revised: 02.20.13 Visit www.abracon.com for Terms & Conditions of Sale ABRACON IS 30332 E sp er anza, R an ch o Sant a Marg a rit a, Calif o r nia 92688 ISO9001:2008 CERTIFIED tel 949-546-8000 | fa x 949-546-8001 | www . a brac o n .co m

Wire Wound Magnetically Shielded SMD Power Inductor ASPI-2010 ASPI-2010 series Pb RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm ELECTRICAL CHARACTERISTICS CURVES PART IDENTIFICATION: ASPI-2010- - Inductance Code Tolerance Packaging Please refer to the M: ±20% T: Tape and Reel (2kpcs / reel) table above OUTLINE DIMENSION: Recommended Land Pattern A B C Max. D E F a Typ. b Typ. c Typ. 2.0±0.2 1.6±0.2 1.0 1.2±0.2 0.60±0.2 0.80±0.2 0.70 0.70 1.70 Dimensions: mm Revised: 02.20.13 Visit www.abracon.com for Terms & Conditions of Sale ABRACON IS 30332 E sp er anza, R an ch o Sant a Marg a rit a, Calif o r nia 92688 ISO9001:2008 CERTIFIED tel 949-546-8000 | fa x 949-546-8001 | www . a brac o n .co m

Wire Wound Magnetically Shielded SMD Power Inductor ASPI-2010 ASPI-2010 series Pb RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm MATERIAL: No Components Material 1 Ferrite Core Ni-Zn Ferrite Polyurethane System enameled copper 2 Wire wire 3 Magnetic Glue Epoxy resin and magnetic powder 4 Plating Electrodes Plating: Ag/Ni/Sn Top surface solder coating: 5 Outer Electrodes Sn96.5%/Ag3%/Cu0.5% ROEUFTLLOINWE PDRIMOFEINLSEI:ON: ∆ Preheat condition: 150 ~200˚C /60~120sec. ∆ Allowed time above 217˚C: 60~90sec. ∆ Max temp: 260˚C ∆ Max time at max temp: 5sec. ∆ Solder paste: Sn/3.0Ag/0.5Cu ∆ Allowed Reflow time: 2x max Revised: 02.20.13 Visit www.abracon.com for Terms & Conditions of Sale ABRACON IS 30332 E sp er anza, R an ch o Sant a Marg a rit a, Calif o r nia 92688 ISO9001:2008 CERTIFIED tel 949-546-8000 | fa x 949-546-8001 | www . a brac o n .co m

Wire Wound Magnetically Shielded SMD Power Inductor ASPI-2010 ASPI-2010 series Pb RoHS/RoHS II Compliant 2.0 x 1.6 x 1.0 mm TAPE & REEL: T: 2,000pc s / reel Ao Bo W E F Po P P Do T K 1 2 1.90±0.05 2.20±0.05 8.0±0.1 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 1.5+0.1/-0.0 0.25±0.02 1.20±0.05 Storage Conditions a. To ma intain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. b. Recommended conditions: -10oC ~ +40 oC, 70% RH (Max.) c. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within one year from the time of delivery. d. In case of storage over 6 months, solderability shall be checked before actual usage. Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Revised: 02.20.13 Visit www.abracon.com for Terms & Conditions of Sale ABRACON IS 30332 E sp er anza, R an ch o Sant a Marg a rit a, Calif o r nia 92688 ISO9001:2008 CERTIFIED tel 949-546-8000 | fa x 949-546-8001 | www . a brac o n .co m