1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612YSGC-F01 Yellow Super Bright Green Features Descriptions (cid:122) 1.6mmx1.25mm SMD LED, 0.65mm thickness. (cid:122) The Yellow source color devices are made with Gallium (cid:122) Bi-color,low power consumption. Arsenide Phosphide on Gallium Phosphide Yellow Light (cid:122) Wide viewing angle. Emitting Diode. (cid:122) Ideal for backlight and indicator. (cid:122) The Super Bright Green source color devices are made (cid:122) Package : 2000pcs / reel. with Gallium Phosphide Green Light Emitting Diode. (cid:122) Moisture sensitivity level : level 3. (cid:122) RoHS compliant. Package Dimensions Yellow Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

Selection Guide Iv (mcd) [2] V i e w i n g @ 20mA Angle [1] Part No. Emitting Color (Material) Lens Type Min. Typ. 2θ1/2 Yellow (GaAsP/GaP) 3 8 APTB1612YSGC-F01 Water Clear 150° Super Bright Green (GaP) 5 12 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions Yellow 590 λpeak Peak Wavelength Super Bright Green 565 nm IF=20mA Yellow 588 λD [1] Dominant Wavelength Super Bright Green 568 nm IF=20mA Yellow 35 Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm IF=20mA Yellow 20 C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz Yellow 2.1 2.5 VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA Yellow 10 IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Yellow Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 140 140 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

Super Bright Green Yellow 100% T = 25 °C u.) 80% a a. y ( sit 60% n e nt e I 40% v ati el 20% R 0% 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Ta = 25 °C -15° 0° 15° -30° 30° -45° 45° -60° 60° -75° 75° -90° 90° 1.0 0.5 0.0 0.5 1.0 APTB1612YSGC-F01 Yellow SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

Super Bright Green SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

APTB1612YSGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

PACKING & LABEL SPECIFICATIONS APTB1612YSGC-F01 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAE7243 REV NO: V.11B DATE: DEC/07/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002074

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: APTB1612YSGC-F01