CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Upgrade! PSG NPCAPTM- Series ●Super low ESR, high ripple current capability ●Endurance: 2,000 to 5,000 hours at 105℃ PSG ●Rated voltage : 16 to 25Vdc ●RoHS Compliant Downsized ●Halogen Free PSF ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage 16 to 25Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage(V)×1.15 (at 105℃) Leakage Current I=0.2CV or 500μA, whichever is greater *Note Where, I : Leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Dissipation Factor (tanδ) 0.12 max. (at 20℃, 120Hz) Low Temperature Z(-25℃)/Z(+20℃)≦1.15 Characteristics Z(-55℃)/Z(+20℃)≦1.25 (Max.Impedance Ratio) (at 100kHz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours (20, 25V : 2,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ●Terminal Code : E F05,F08,H06,H08 Coated Case 5 Size code F05 F08 H06 H08 HB5 JB5 ◆MARKING dφ 0.F± φφDd 0.456.3 80..06 10.0 EX) 16V150μF D'φ F 2.5 3.5 5.0 G 6D6 φD' φD+0.5max. 150 L' L+1.0max. L+1.5max. 16V L' 15min. 4min. HB5,JB5 Coated Case 5 dφ F0.± D' φ L' 15min. 4min. Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations. (1/2) CAT. No. E1001M

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Upgrade! PSG NPCAPTM- Series ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSG E M S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150µF:151) Lead forming·Taping code Terminal code Voltage code (ex. 16V:160,20V:200) Series code Category Please refer to “Product code guide (conductive polymer type)” ◆STANDARD RATINGS WV Cap Case size ESR Rated ripple current Part No. (Vdc) (µF) φD×L (mm) (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 150 6.3×5 20 3,200 APSG160E□□151MF05S 270 6.3×8 15 3,800 APSG160E□□271MF08S 270 8×6 22 3,300 APSG160E□□271MH06S 16 470 8×8 16 4,000 APSG160E□□471MH08S 560 8×11.5 14 4,970 APSG160E□□561MHB5S 820 10×11.5 12 5,400 APSG160E□□821MJB5S 1,000 10×11.5 12 5,400 APSG160E□□102MJB5S 120 6.3×5 20 3,200 APSG200E□□121MF05S 330 8×8 17 3,880 APSG200E□□331MH08S 20 390 8×11.5 14 4,970 APSG200E□□391MHB5S 680 10×11.5 12 5,400 APSG200E□□681MJB5S 56 6.3×5 30 2,600 APSG250E□□560MF05S 180 8×8 18 3,770 APSG250E□□181MH08S 180 8×11.5 16 4,650 APSG250E□□181MHB5S 25 220 8×11.5 16 4,650 APSG250E□□221MHB5S 330 10×11.5 14 5,000 APSG250E□□331MJB5S 390 10×11.5 14 5,000 APSG250E□□391MJB5S □□ : Enter the appropriate lead forming or taping code. Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations. (2/2) CAT. No. E1001M

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: U nited Chemi-Con (UCC): APSG160ELL271MH06S APSG160ELL471MH08S APSG160ELL561MHB5S APSG160ELL821MJB5S APSG200ELL121MF05S APSG200ELL681MJB5S APSG250ELL391MJB5S