1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED Part Number: APHB1608ZGSURKC ATTENTION OBSERVE PRECAUTIONS Green FOR HANDLING Hyper Red ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description (cid:122) 1.6mmX0.8mm SMT LED, 0.5mm thickness. The Green source color devices are made with InGaN (cid:122) Compatible with reflow soldering. on Sapphire Light Emitting Diode. (cid:122) Available in various color combination. The Hyper Red source color devices are made with Al- (cid:122) Package: 2000pcs / reel. GaInP on GaAs substrate Light Emitting Diode. (cid:122) Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. (cid:122) Tinned pads for improved solderability. It is recommended to use a wrist band or anti-electrostatic (cid:122) RoHS compliant. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAN0769 REV NO: V.1A DATE: JUN/28/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011134

Selection Guide Iv (mcd) [2] V i e w i n g @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. Max. 2θ1/2 200 - 500 Green (InGaN) *200 - *500 APHB1608ZGSURKC Water Clear 130° 120 250 - Hyper Red (AlGaInP) *40 *90 - Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Green 515 λpeak Peak Wavelength Hyper Red 645 nm IF=20mA Green 525 λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA Green 30 Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA Green 45 C Capacitance Hyper Red 35 pF VF=0V;f=1MHz Green 3.3 4.1 VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA Green 50 IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Green Hyper Red Units Power dissipation 102.5 75 mW DC Forward Current 25 30 mA Peak Forward Current [1] 150 185 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAN0769 REV NO: V.1A DATE: JUN/28/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011134

APHB1608ZGSURKC Green SPEC NO: DSAN0769 REV NO: V.1A DATE: JUN/28/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011134

Hyper Red SPEC NO: DSAN0769 REV NO: V.1A DATE: JUN/28/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011134

APHB1608ZGSURKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAN0769 REV NO: V.1A DATE: JUN/28/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011134

PACKING & LABEL SPECIFICATIONS APHB1608ZGSURKC All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0769 REV NO: V.1A DATE: JUN/28/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203011134

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: APHB1608ZGSURKC