SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series Pb RoHS/RoHS II compliant 25.4 x 22.1 x 12.7 mm | | | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = 1 FEATURES: APPLICATIONS: • 25.4 x 22.1 x 12.7 mm True SMT- RoHS Compliant Reflow-able Package • Cellular Infrastructure • SC-Cut, High “Q” resonator based design • Radar Systems • Either Sinewave or CMOS RF output • Test & Measurement Equipment • Available with ±30 ppb over -40°C to +75°C operating temperature Range • GPS Tracking with precision hold-over accuracy • Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available • WiMax / WLAN • Exceptional long-term Aging of ±500 ppb over 10-Year Product Life • Excellent close-in phase noise (-135 dBc/Hz Typical @100 Hz offset from 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes RF Output 10.0 0 100.00 MHz CMOS output Frequency 10.0 0 100.00 MHz Sinewave output 10.00, 12.80, 13.00, 16.384, 20.00, 26.00, 38.40, Standard Available Frequencies 38.88, 40.00, 100.00 MHz Operable Temperature Range 0 50 º C See Stability Options Frequency Stability Options 0º C to +50ºC ±5.00 ppb Default Spec. -20º C to +70ºC ±10.00 ppb Option “E” -40º C to +75ºC ±30.00 ppb Option “F” Frequency Stability vs. Supply ±20.00 ppb Voltage (Vdd ± 5%) Warm-Up @ 25 ºC ±100.00 ppb In < 3-minutes Power Consumption @ turn on 3.60 Watts Power Consumption Steady State 1.40 Watt Supply Voltage (Vdd) 3.135 3.30 3.465 Volts See Options Reference Voltage (Vref) 2.60 2.80 3.00 Volts For Vdd=+3.3V version (available as an output to facilitate oscillator tuning) 4.30 4.50 4.70 Volts For Vdd=+5.0V version Aging Daily aging (after 30 days) ±1.0 ppb Yearly ±100 ppb 10-Years ±500 ppb Waveform LVCMOS Level "1" (Logic High) 0.9*Vdd Volts Level "0" (Logic Low) 0.1*Vdd Volts Load 15 pf Rise & Fall Time 5.0 ns Duty Cycle 45 55 % Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 AABBRRAACCOONN IISS 30332Esper anza, Ranch oSant aMargarit a,California92688 ISO9001:2008 CCEERRTTIIFFIIEEDD tel949-546-8000| fax 949-546-8001| www . abraco n.co m

SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series Pb RoHS/RoHS II compliant 25.4 x 22.1 x 12.7 mm | | | || | | | | | | | | | | STANDARD SPECIFICATIONS contd. Parameters Minimum Typical Maximum Units Notes Waveform Sinewave Peak Power 2.00 dBm Output Load 50 Ω Spectral Content Spurious Response -70 dBc Phase Noise @ 10MHz Carrier (Vdd=3.3V) @ 1 Hz offset -90 dBc / Hz @ 10 Hz offset -120 dBc / Hz @ 100 Hz offset -135 dBc / Hz @ 1,000 Hz offset -145 dBc / Hz @ 10,000 Hz offset -150 dBc / Hz @ 100,000 Hz offset -150 dBc / Hz @ 1,000,000 Hz offset -150 dBc / Hz Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Vdd Volts Frequency Pull Range ±0.7 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 kΩ Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY - - MHz - - Supply Voltage Option Frequency in MHz Temperature Options RF Output Options Blank: 3.30V±5% Such as; 10.000 MHz Blank: ±5.0ppb/0°C to+50°C Blank: CMOS A: 5.00V±5% 26.000 MHz E: ±10.0ppb/-20°C to +70°C SW: Sinewave 100.000 MHz F: ±30.0ppb/-40°C to +75°C OUTLINE DIMENSIONS Recommended Soldering Pattern Pin Function 1 Control Voltage 2 VREF 3 Supply Voltage 4 RF-output 5 Ground. Case Dimensions: Inches (mm) Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 AABBRRAACCOONN IISS 30332Esper anza, Ranch oSant aMargarit a,California92688 ISO9001:2008 CCEERRTTIIFFIIEEDD tel949-546-8000| fax 949-546-8001| www . abraco n.co m

SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series Pb RoHS/RoHS II compliant 25.4 x 22.1 x 12.7 mm | | | | | || | | | | | | | | REFLOW PROFILE: TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (T Min.) 150°C S Temperature Typical (TS Typ.) 175°C Temperature Max. (T Max.) 200°C S Time (t ) 60 ~ 180 seconds S Ramp-up rate (TL to Tp ) 3°C/second max. Time Maintained Above: --Temperature (T)/Time (T) 217°C/60 ~ 150 seconds L L Peak Temperature (Tp) 250°C max. for 10 seconds Target Peak Temperature (T Target) 250°C +0/-5°C p Time within 5°C of actual peak (t) 20 ~ 40 seconds p Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. PACKAGING: (15) units per tray ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 AABBRRAACCOONN IISS 30332Esper anza, Ranch oSant aMargarit a,California92688 ISO9001:2008 CCEERRTTIIFFIIEEDD tel949-546-8000| fax 949-546-8001| www . abraco n.co m