E M C C o m p o n e n t s Common mode filters Cl Pb Br For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) ACM-H series RoHS SRVEHCA-CFrHee HaFlroegeen LFereaed ACM2012H-T05 type FEATURES Broadband common mode filter that was developed for Gbps-level high-speed differential signal interfaces such as DVI and HDMITM. Differential mode cutoff frequency is 6.0GHz, so they do not negatively influence high-speed differential signals. Characteristics impedance is matched for 100, which is set for many differential interfaces, and can suppress unnecessary reflection components. 380 is a common mode filter developed for the LAN interface. It does not adversely affect the transmission signal of the LAN and suppresses unnecessary common mode noise. Operating temperature range: –40 to +85°C APPLICATION EMI measure for HDMITM, which is an interface for digital video devices:ACM2012H is ideal for senders (Sources) such as Digital TVs, DVD recorders, and liquid crystal projectors, while ACM2012E(-T01 series) is ideal for receivers (Sink). EMI measure for high-speed differential signal interfaces for digital video signal interfaces such as DVI, Display port, and Serial ATA used for PCs, etc. The 380 product is suitable for EMI-proofing with pulse-length ALT4532 series for devices connected to LANs such as personal com- puters. Additionally, 90 product is suitable for anti-EMI measures with pulse ALT4532H series in high-speed LAN interfaces such as 10G Ethernet. PART NUMBER CONSTRUCTION ACM 2012 H - 900 - 2P - T 05 L×W×H dimensions Product Impedance Series name Number of lines Packaging style Internal code 2.0×1.2×1.2 mm internal code ()at 100MHz CHARACTERISTICS SPECIFICATION TABLE Common mode DC resistance Rated current Rated voltage Insulation Cutoff Characteristic Part No. impedance resistance frequency impedance [at 100MHz] [1 line] ()min. ()typ. ()max. (mA)max. (V)max. (M)min. (GHz)typ. ()typ. 65 90 0.30 300 20 10 6 100 ACM2012H-900-2P-T05 280 380 0.50 300 20 10 — — ACM2012H-381-2P-T05 Measurement equipment Measurement item Product No. Manufacturer Common mode impedance 4991A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012h-t05_en.fm

E M C C o m p o n e n t s ACM2012H-T05 type IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 1000 Ω) (e 381 Common mode c n 100 a d e p m I 900 Differential mode 381 Differential mode 10 900 Common mode 1 1 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer 4991A Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012h-t05_en.fm

E M C C o m p o n e n t s ACM2012H-T05 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 2.0±0.2 2.0±0.5 2 typ. ±1.20.2 0 – ±1.20.1 60+1/ 0.4 1.0 (0.4) (1.2) ø13.0±0.2 9+1/–0 ()0.5 ø21.0±0.8 13±1.4 ()0.3 ø180+0/–3 Dimensions in mm Dimensions in mm TAPE DIMENSIONS RECOMMENDED LAND PATTERN 0.4 Shoplreocket 1.5+00.1 2.0±0.1 4.0±0.1 1.75±0.1 3.5±0.1 0.4 2 0.75 1.2 0.75 0.4 B 8.0±0. Dimensions in mm K A 4.0±0.1 Cavity Dimensions in mm CIRCUIT DIAGRAM Type A B K ACM2012H-T05 1.4±0.1 2.25±0.1 1.4±0.1 1 4 2 3 500 to 560min. (cid:129) No polarity 160min. Taping 440min. RECOMMENDED REFLOW PROFILE Drawing direction Preheating Soldering Natural cooling Dimensions in mm Peak 245°C PACKAGE QUANTITY Package quantity 2000 pcs/reel e 230°C 230°C ur at er p TEMPERATURE RANGE, INDIVIDUAL WEIGHT m e 180°C T Operating Storage Individual 5s max. 150°C temperature range temperature range weight –40 to +85 °C –40 to +85 °C 10 mg 60 to 120s 10 to 30s  The storage temperature range is for after the assembly. Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012h-t05_en.fm

E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment　　 (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro- tection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012h-t05_en.fm

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T DK: ACM2012H-900-2P-T000 ACM2012H-900-2P-T00 ACM2012H-900-2P-T05 ACM2012H-381-2P-T05