8 7 6 5 4 3 2 1 NOTES 3MTM BOX HEADER, 957 SERIES 1. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE 2MM X 2MM, STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION. 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT D D SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 3 N = THE NUMBER OF POSITIONS. PHYSICAL: 2 DUAL ROW INSULATOR: STRAIGHT MATERIAL: HIGH TEMP THERMOPLASTIC FLAMMABILITY: UL94V-0 VERSION COLOR: BLACK CONTACT: MATERIAL: COPPER ALLOY PLATING: UNDER PLATING: 50-100 " [1.27-2.54 m] NICKEL-OVERALL WIPING AREA: GOLD FLASH SOLDER TAILS: 40-118 " [1-3 m] MATTE TIN C C ELECTRICAL: 2 CURRENT RATING: 2A CONTACT RESISTANCE: <20 m INSULATION RESISTANCE: >1000 M WITHSTANDING VOLTAGE: 500 Vr.m.s, 1mA, 60s MECHANICAL: 2 RETENTION FORCE: > 4.5N PER PIN N O CSI VI E R ENVIRONMENTAL: 2 6 - DUAL ROW TEMPERATURE RATING: -40 C TO 125 C 1 6 5 HUMIDITY: <93% AT 40 C 6 RIGHT ANGLE 2 RESISTANCE TO SOLDERING HEAT: 260 C 5 C, 10s - 0R VERSION 0MBE 1U 5G N -N 8WI A 7R D B B t e s f f O C C 78557 APR 05,2018 SBO FR T U UPDATE TABLE 1 TO 8 DUAL ROW REMOVE [IN] VALUES 1 0 B 74628 JUL 06,2017 LDS SC 2 / SURFACE MOUNT 5 1 WAS: -40C TO 105C / 4 DIMENSIONS: INCH [MM] VERSION [MM] FOR REF. ONLY A 72044 FEB 02,2017 JNC TS me PRODUCTION RELEASE Ti DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE MAY 14,2015 d A CHKD DATE APPVL DATE An T. SUNIGA MAY 14,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n MM [INCH] INCHES TITLE e BOX HEADER, 2MM, 3MTM ELECTRONICS MATERIALS SOLUTIONS DIVISION .0 C TOLERANCE - UNLESS NOTED .00 INTERCONNECT SOLUTIONS STRAIGHT, RIGHT ANGLE .000 1 X. .X .XX http://www.3m.com/interconnect THIRD ANGLE PROJECTION .0000 . C AND SMT MM .5 .20 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3M IS A TRADEMARK OF 3M COMPANY. [INCH] .02 .008 .0 e FOR TECHNICAL, SALES OR ORDERING [] = DIM. FOR REFERENCE ONLY MAX SURFACE ROUGHNESS .00 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-2656-6 RCEV. ag INFORMATION CALL 800-225-5373 ALL SURFACES .000 m MARKED ONLY ANGLES MODEL9572 DLIESTT.S YES NO SHT 1 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM BOX HEADER, 957 SERIES 2MM X 2MM, STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL DIM. "A" .30 D DIM. "A" .012 D DIM. "C" .30 DIM. "A" .30 DIM. "C" .012 DIM. "A" .012 DIM. "C" .30 4.40 5.50 DIM. "C" .012 .173 .217 4.40 5.50 .173 .217 .51 .10 .020 .004 DIM. "B" SQ. TYP. DIM. "B" 4.00 4.00 4.00 .157 .157 4.00 .157 .157 C MATE LENGTH C MATE LENGTH 5.80 5.80 7.10 2.80 .25 .228 .228 .280 .110 .010 TAIL 2.00 .51 .05 2.00 .10 .020 .002 2.00 .10 2.00 .10 .079 2.40 N .079 .004 SQ. TYP. .079 .004 .079 .004 .094 CSIO VI E R TYP. TYP. TAIL 6 - 6 5 6 2 - 0R 0BE M 1U 5G N -N 8WI A 7R D .80 .08 B .031 .003 ORDERING INFORMATION B AFTER PLATING (STRAIGHT & RIGHT ANGLE ONLY) 2.00 .08 TYP. .079 .003 9572XX-X002-AR TYP. CONTACT QTY: MOUNTING STYLE: 2.00 .08 06-64 5 = RIGHT ANGLE 6 = STRAIGHT DIM. "B" .08 .079 .003 DIM. "B" .003 t e s f f O RECOMMENDED PC BOARD LAYOUT (VIEWED FROM CONNECTOR SIDE) C C 78557 APR 05,2018 SBO FR T U UPDATE TABLE 1 TO 8 REMOVE [IN] VALUES 1 0 B 74628 JUL 06,2017 LDS SC 2 / 5 1 WAS: -40C TO 105C / 4 A 72044 FEB 02,2017 JNC TS e m PRODUCTION RELEASE Ti DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE MAY 14,2015 d A CHKD DATE APPVL DATE An T. SUNIGA MAY 14,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. TABLE 1 mm NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE DIM. "A" 2.00 X (N/2+7.40) e BOX HEADER, 2MM, .0 C DIM. "B" 2.00 X (N/2-1) .00 STRAIGHT, RIGHT ANGLE .000 1 DIM. "C" 2.00 X (N/2+6) THIRD ANGLE PROJECTION .0000 . C AND SMT INTERPRET PER MILLIMETERS SEE NOTE 3 : ASME Y14.5 - 2009 0 d .0 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 NUMBER 78-5100-2656-6 C a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL9572 DLIESTT.S YES NO SHT 2 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM BOX HEADER, 957 SERIES 2MM X 2MM, STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL D D DIM. "A" .30 DIM. "A" .012 ORDERING INFORMATION (SURFACE MOUNT ONLY) DIM. "C" .30 9572XX-20X0-AR-XX DIM. "C" .012 CONTACT QTY: PACKAGING: 06-64 TP = TUBE WITHOUT PAD PT = TUBE WITH PAD PR = TAPE & REEL WITH PAD 4.40 5.50 SEE TABLE 2 LOCATING POST: .173 .217 0 = NONE 10.00 2.00 C .079 DIM. "B" C 5.60 TABLE 2 .220 5.00 TAPE & REEL OPTIONS 4.00 CONTACT QTY. 10-12 14-24 26-34 40-50 60-68 OPTIONAL .157 .197 TAPE WIDTH [MM] 32 44 56 72 88 VACUUM CAP 4.00 .157 MATE LENGTH 5.80 6.70 .25 N O .228 .10 <40 POS. CVISI .264 .010 RE .15 >40 POS. 6 - 6 5 6 2 .51 .05 2.00 0-R 0BE .079 .020 .002 6.50 .30 51G NUM -N TYP. SQ. TYP. .256 .012 78RAWI D B B DIM. "B" .08 DIM. "B" .003 3.80 .05 2.00 .08 .150 .002 .079 .003 TYP. TYP. t e .90 .05 s 8.60 .10 f .035 .002 Of .339 .004 TYP. C C 78557 APR 05,2018 SBO FR T U UPDATE TABLE 1 TO 8 REMOVE [IN] VALUES 1 0 B 74628 JUL 06,2017 LDS SC 2 / 5 RECOMMENDED PC BOARD LAYOUT 1 WAS: -40C TO 105C 4/ (VIEWED FROM CONNECTOR SIDE) A 72044 FEB 02,2017 JNC TS e m PRODUCTION RELEASE Ti DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE MAY 14,2015 d A CHKD DATE APPVL DATE An T. SUNIGA MAY 14,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. TABLE 1 mm NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE DIM. "A" 2.00 X (N/2+7.40) e BOX HEADER, 2MM, .0 C DIM. "B" 2.00 X (N/2-1) .00 STRAIGHT, RIGHT ANGLE .000 1 DIM. "C" 2.00 X (N/2+6) THIRD ANGLE PROJECTION .0000 . C AND SMT INTERPRET PER MILLIMETERS SEE NOTE 3 : ASME Y14.5 - 2009 0 d .0 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 NUMBER 78-5100-2656-6 C a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL9572 DLIESTT.S YES NO SHT 3 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 D D Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given C the variety of factors that can affect the use and performance C of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION N O ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. CSI VI E If the 3M product does not conform to this warranty, then the R sole and exclusive remedy is, at 3M's option, replacement of 6 the 3M product or refund of the purchase price. - 6 5 6 2 Limitation of Liability: Except where prohibited by law, - 0R 3M will not be liable for any loss or damage arising from the 0BE M 3M product, whether direct, indirect, special, incidental or 51G NU consequential, regardless of the legal theory asserted, 8-WIN A including warranty, contract, negligence or strict liability. 7DR B B t e s f f O C C 78557 APR 05,2018 SBO FR T U UPDATE TABLE 1 TO 8 REMOVE [IN] VALUES 1 0 B 74628 JUL 06,2017 LDS SC 2 / 5 1 WAS: -40C TO 105C / 4 A 72044 FEB 02,2017 JNC TS e m PRODUCTION RELEASE Ti DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE MAY 14,2015 d A CHKD DATE APPVL DATE An T. SUNIGA MAY 14,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 1 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e BOX HEADER, 2MM, .0 C .00 STRAIGHT, RIGHT ANGLE .000 1 THIRD ANGLE PROJECTION .0000 . C AND SMT INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 NUMBER 78-5100-2656-6 C a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL9572 DLIESTT.S YES NO SHT 4 OF 4 I 8 7 6 5 4 3 2 1