8L SERIES/SPARTAN DIP REED RELAYS 8L Series Economy DIP Reed Relays The Coto 8L Spartan Series relays combine Coto quality and economy in the industry standard 14 pin molded DIP package. This series will cross to all competitive DIP packages and is ideal for telecom, security, and other general purpose applications. 8L Series Features u Drop-in low cost replacement for industry standard DIP packages u Contact forms; 1A, 2A and 1C available u Available coils in 5V, 12V and 24V u Molded thermoset body on integral lead frame design u Hermetically Sealed Contacts u Optional Electrostatic Shield and Coil Suppression Diode u UL File #E67117 - Contact factory for details u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 8L01, 8L02 & 8L41 Alternate Package 14 13 9 8 14 13 9 8 1 2 6 7 1 2 6 7 .775(19.50) Max. .300 .77(19.60) Max. (7.62) IDENTIFIES PIN #1 .270 IDENTIFIES PIN #1 .27 (6.85) (6.90) Max. .260 .27 (6.60) (6.90) Max. .140(3.55) .015 .125(3.18) .015 .100(2.54) (0.3.80)20 .333 .100(2.54) (0.3.80)18 .355 .600(15.24) (0.51) (8.46) .600(15.24) (0.46) (8.50) Model 8L61 14 13 9 8 IDENTIFIES PIN #1 1 2 6 7 Ordering Information Ordering Information .775 Max. .270 Part Number 8LXX-XX-XX1 (19.50) (6.58) Part Number 8LXX-XX-XX Model Number Diode Option3 .260 Model Number Diode Option3 8L01 8L41 8L61 0=No Diode 1=Diode (6.60) .013 8L02 0=No Diode 1=Diode (0.33) Coil Voltage Shield Option4 .0(820.0 T0y)p. .300 Coil Voltage Shield Option4 05=5 volts 0=No Shield .(120.504) (7.3.6620) 05=5 volts 0=No Shield 12=12 volts 1=Electrostatic Shield .(51020.7) (9.14) 12=12 volts 1=Electrostatic Shield 24=24 volts .600 24=24 volts (15.24) 06112015 tel: (401) 943.2686 | fax: (401) 942.0920

MODEL NUMBER 8L012,3,4 8L022,3,4 8L412,3,4 8L612,3,4,5 Parameters Test Conditions Units 1 Form A 2 Form A 1 Form C 1 Form C COIL SPECS. Nom. Coil Voltage VDC 5 12 24 5 12 24 5 12 24 5 12 24 Max. Coil Voltage VDC 6.5 15 32 6.5 15 32 6.5 15 32 6.5 15 32 Coil Resistance +/- 10%, 25° C Ω 500 500 2150 200 500 2000 200 500 2000 200 500 2000 Operate Voltage Must Operate by VDC - Max. 3.8 9.6 19.2 3.8 9.6 19.2 3.8 9.6 19.2 3.8 9.6 19.2 Release Voltage Must Release by VDC - Min. 0.5 1.0 2.0 0.5 1.0 2.0 0.5 1.0 2.0 0.5 1.0 2.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 100 100 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.25 0.25 Carry Current Max DC/Peak AC Resist. Amps 1.0 1.0 0.5 0.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 3 3 Life Expectancy-Typical1 Signal Level 1.0V, 10mA x 106 Ops. 500 500 100 100 Static Contact 50mV, 10mA Ω 0.150 0.150 0.200 0.200 Resistance (max. init.) Dynamic Contact 50mV, 50mA Ω N/A N/A N/A N/A Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins Ω 1010 1010 109 109 (minimum) at 100V, 25°C, 40% RH No Shield pF 0.5 0.5 1.5 1.5 Capacitance - Typical Shield Floating pF 1.0 0.5 1.5 1.5 Across Open Contacts Shield Guarding pF 0.5 0.2 1.0 1.0 No Shield pF 1.5 1.5 1.5 1.5 Open Contact to Coil Shield Floating pF 2.0 2.0 2.0 2.0 Shield Guarding pF 0.5 0.5 0.5 0.5 No Shield Contact to Shield Shield Floating pF 2.0 1.5 2.0 2.0 Shield Guarding Between Contacts VDC/peak AC 250 250 200 200 Dielectric Strength Contacts to Shield VDC/peak AC 1500 1500 1500 1500 (minimum) Contacts/Shield to Coil VDC/peak AC 1500 1500 1500 1500 Operate Time - including At Nominal Coil Voltage, msec. 0.5 0.5 1.0 1.0 bounce - Typical 30 Hz Square Wave Release Time - Typical No Suppression msec. 0.5 0.5 1.0 1.0 1 14 1 14 1 14 1 14 Top View: 2 13 2 13 2 13 2 13 Dot stamped on top of relay refers to pin #1 location Grid = .1”x.1” (2.54mm x 2.54mm) 6 9 6 9 6 9 6 9 7 8 7 8 7 8 7 8 Notes: 1 Consult factory for life expectancy at other switching loads. 2 Molded depression on top of relay refers to pin #1 location. Environmental Ratings: 3 Optional coil suppression diode across pins 2(+) and 6(-). 4 Optional ES Shield is tied to pin 9. Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; 5 Surface mount processing temperature: 260ºC max for 1 Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. minute dwell time. Temperature measured on lead where Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s lead exits molded package. 06112015 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.