SERIES 690 / 693 USB AND IEEE 1394 Edac series 690 USB (Universal Serial Bus) and series 693 (IEEE1394) connectors are industry-standard data transfer devices used to interconnect computers to peripheral de- vices such as scanners and printers. A wide variety of styles are available including right angle, vertical, and a unique right angle vertical that minimizes board space. USB products are compatible with asynchronous and isochronous data transfer methods up to 1.2 Mbps and util- ize plug and play technology. Edac manufactures both USB and IEE1394 connectors in through-hole or SMT board styles as well as molded cable assemblies for USB A, B, mini-USB and IEEE variations (see cable series 628 and table below). Edac can also manufacture USB units stacked with RJ45s (with or without LEDs) on special order. SPECIFICATIONS • USB 1.1 or USB 2.0 available • Voltage Rating: 30 volts AC rms maximum • Minimum mating cycles: 1500 per EIA 364-09 • DW Voltage: 750 vac@0asl (USB), DC500 (1394) • Insulator Housing: UL 94V-0 thermoplastic • Shield Housing: copper alloy • Contact Material: P Bronze (USB), Copper Alloy (1394) • Mate/Un-mate: 35/10 Newtons per EIA 364-13 • Contact Plating: Gold Flash or Gold Plate over nickel • Temperature Range -55 to +85 degrees C • Contact Resistance: 30 milliohms maximum • Insulation Resistance: 100 megaohms minimum Popular styles are stocked by our authorized • Current Rating: 1 amp maximum under 30 degrees C distributors worldwide. Factory minimum order quantity (MOQ) is 1,000 pieces per item. ORDERING CODE SAMPLE PART NUMBER: 693-006-620-003 • 693 = Series Number: 690 = USB (1.1 or 2.0), 693 = IEEE 1394a Standard • 006 = Number of contacts: 004 = single jack USB; 006 = single jack IEEE 1394a; 008 = dual stacked USB type A; 012 = triple stacked USB type A • 6 = Gold thickness: 2 = gold flash (standard for original USB). 3 = 15u gold plate (USB 1.1 only), 6 = 30u gold plate (mandatory for series 693 to meet IEEE 1394a specification; also mandatory for USB 2.0). • 20 = Contact Orientation: FOR SERIES 690: 21 = Right angle contacts (jack face 90 degrees from PCB and parallel to board). 60 = vertical contacts (jack face 180 degrees from PCB), 61 = Right angle vertical (jack face 90 degrees from PCB and vertical to board), 99 = surface mount right angle contacts. FOR SERIES 693: 20 = Right angle contacts (jack face 90 degrees from PCB and parallel to board). 21 = Right angle vertical (jack face 90 degrees from PCB and vertical to board), 22 = vertical contacts (jack face 180 degrees from PCB), 99 = surface mount right angle contacts. • 003 = Connector Type: 003 = IEEE 1394a, 013 = USB Type A, 023 = USB Type B, 033 = Miniature USB Type A, 043 = Miniature USB Type B • Popular cable assembles (all connectors are male): 628-000-940 = USB A to Mini USB A x 1 meter 628-000-906-1 = IEEE1394a both ends x 0.7meter 628-000-942 = USB A to USB A x 1.8 meters 628-000-906-2 = IEEE1394a both ends x 2.0 meters 628-000-943 = USB A to USB B x 1.8 meters 628-000-906-3 = IEEE1394a both ends x 4.5 meters 628-000-944 = USB B to USB B x 1.8 meters 628-000-906-4 = IEEE1394a both ends x 10.0 meters Copyright © 2004 Edac Inc. All rights reserved www.edacelco.d e Sheet D-6903