ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: • Lowest ESR in Class • Highest Working Voltage in Class – 200V • Standard EIA Size: 0402 • High Self Resonance Frequencies Applications: • Cellular Base Stations • Subscriber-based Wire- • Broadband Wireless less Devices Services • WiFi (802.11) • Satellite Communications • WiMAX (802.16) Circuit Applications: ATC 600 SERIES OVERVIEW • Filter Networks • Matching Networks ATC Series ATCCase Size EIA Case Size • High Q Frequency • Tuning, Coupling, Bypass 600 L 0402 Sources and DC Blocking 600 S 0603 600 F 0805 Electrical Specifications Mechanical Specifications Capacitance: 0.1 to 27 pF Terminations: T = Tin Plated over Nickel Barrier*(Standard) Tolerances: See Cap Value Chart TN = Tin Plated over Non- Working Voltage (WVDC): 200 V Magnetic Barrier* Quality Factor (Q): > 2000 @ 1 MHz W = Tin/Lead Solder Plated Operating Temperature over Nickel Barrier Range: -55°C to +125°C Solderability: Solder coverage > 90% of end (no derating of working voltage) termination Temperature coefficient of Terminal Strength: 2 lbs. typ., 1 lb. min. Capacitance (TCC): 0 ± 30 ppm/°C, -55°C to +125°C Environmental Specifications Insulation Resistance: 105 M(cid:0) min. at +25°C Life Test: 2000 hours, +125°C at 2X at rated WVDC WVDC 104 M min. at +125°C Thermal Shock: 5 cycles, -55°C to +125°C at rate∆d WVDC Moisture Resistance: MIL-STD-202, Method 106 Dielectric Withstanding 2.5 x WVDC for 5 seconds Military Approval Voltage (DWV): * DSCC Drawing Number 05003 Aging: None Piezo Effects: None ATC 600 Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. American Technical Ceramics THE ENGINEERS’ CHOICETM www.atceramics.com ATC # 001-976; Rev M, 1/15

ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Capacitance Values* Value (pF) Cap Code Tolerances Value (pF) Cap Code Tolerances Value (pF) Cap Code Tolerances 0.1 0R1 A, B 1.6 1R6 A, B, C, D 6.2 6R2 A, B, C, D 0.2 0R2 A, B 1.8 1R8 A, B, C, D 6.8 6R8 B, C, J, K 0.3 0R3 A, B, C 2.0 2R0 A, B, C, D 7.5 7R5 B, C, J, K 0.4 0R4 A, B, C 2.2 2R2 A, B, C, D 8.2 8R2 B, C, J, K 0.5 0R5 A, B, C 2.4 2R4 A, B, C, D 9.1 9R1 B, C, J, K 0.6 0R6 A, B, C 2.7 2R7 A, B, C, D 10 100 F, G, J, K, M 0.7 0R7 A, B, C 3.0 3R0 A, B, C, D 11 110 F, G, J, K, M 0.8 0R8 A, B, C 3.3 3R3 A, B, C, D 12 120 F, G, J, K, M 0.9 0R9 A, B, C 3.6 3R6 A, B, C, D 15 150 F, G, J, K, M 1.0 1R0 A, B, C, D 3.9 3R9 A, B, C, D 18 180 F, G, J, K, M 1.1 1R1 A, B, C, D 4.3 4R3 A, B, C, D 20 200 F, G, J, K, M 1.2 1R2 A, B, C, D 4.7 4R7 A, B, C, D 22 220 F, G, J, K, M 1.3 1R3 A, B, C, D 5.1 5R1 A, B, C, D 24 240 F, G, J, K, M 1.5 1R5 A, B, C, D 5.6 5R6 A, B, C, D 27 270 F, G, J, K, M *Non-standard values and custom tolerances are available upon request. ATC Part Number Code 600 L 10 0 J T 200 T ATCSeries Packaging Case Size (0402) T - Tape and Reel (Standard)* Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Capacitance Tolerance Termination Code T = Tin Plated over Nickel Barrier (Stan- TOLERANCE CODE TABLE dard)RoHS Compliant TN = Tin Plated over Non-Magnetic Barrier Code A B C D F G J K M W = Tin/Lead Solder Plated over Nickel Tol. ±0.05pF ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20% Barrier *10,000 pieces on 7'' reel, 4000 pieces on 7'' reel and 500 pieces on prototype reel. Consult ATC for other options. The above part number refers to a 600L Series (case size L) 10 pF capacitor, J tolerance (±5%), 200 WVDC, with T termination (Tin Plated over Nickel Barrier, RoHS Compliant),Tape and Reel packaging. ATC accepts orders for our parts using designations withor without the For additional information and catalogs contact your ATC representative “ATC” prefix. Both methods of defining the part number are equivalent, or call direct at (+1-631) 622-4700. i.e., part numbers referenced with the “ATC” prefix are interchangeable to Consult factory for 500 piece reels for prototyping. parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. Consult factory for additional performance data. A M E R I C A N T E C H N I C A L C E R A M I C S ATC North America ATC Europe ATC Asia sales@atceramics.com saleseur@atceramics.com sales@atceramics-asia.com w w w . a t c e r a m i c s . c o m 2

ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors 600L ESR vs. Frequency 1 s) 27 pF m 15 pF h 0.1 8.2 O 3.3 pF ( 1.0 pF R S E (Typical) 0.01 100 1000 10000 Frequency (MHz) 600L Resonant Frequency Data ) z H G ( y c n e u q e r F ) 0.1 1.0 10.0 100.0 Capacitance (pF) ATC 600L Series Data Sheet Test Condition Description Capacitors mounted in series microstrip configuration on 10-mil thick Rogers RO4350®softboard, 22-milswide1/2oz.Cu traces. FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart. FPR = lowest frequency at which there is a notch in S21 magnitude response. A M E R I C A N T E C H N I C A L C E R A M I C S ATC North America ATC Europe ATC Asia sales@atceramics.com saleseur@atceramics.com sales@atceramics-asia.com w w w . a t c e r a m i c s . c o m 3

ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Outline Dimensions Y L: .040 ± .004 (1.02 ± 0.1) T: .024 max. (0.60 max.) W L (0402) W: .020 ± .004 (.51 ± 0.1) Y: .010 ± .006 (0.25 ± 0.15) L T Inches (mm) Suggested Mounting Pad Dimensions W L Case Sizes L, S and F T Case Size A Min. B Min. C Min. D Min. .0275 .0354 .0157 .0866 0402 (1005) (0.70) (0.90) (0.40) (2.20) B B .0393 .0433 .0236 .110 0603 (1608) (1.00) (1.10) (0.60) (2.80) A C .0590 .0512 .0236 .1259 0805 (2012) (1.50) (1.30) (0.60) (3.20) D Inches (mm) Design Kits Each Kit contains a selection of standard capacitor values for circuit prototyping. Cap. Value Cap. Values Tol. Kit # Item # Description Price Range (pF) (pF) (pF) Kit DK0036T 600L Series Ultra-low ESR, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, ±0.1 High Q Microwave Capacitors 0.1 to 2.0 1.0, 1.1, 1.2, 1.5 $90.00 36T 16 different values, 15 pcs. min. per value 1.6, 1.8, 2.0 ±0.25 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3 ±0.1 DK0037T 600L Series Ultra-low ESR, Kit High Q Microwave Capacitors6 1.0 to 10 3.9, 4.7, 5.6, 6.8, 8.2 ±0.25 $90.00 37T 16 different values, 15 pcs. min. per value 10 ±5% DK0038T 600L Series Ultra-low ESR, Kit High Q Microwave Capacitors 10 to 27 10, 12, 15, 18, 20, 22, 24, 27 ±5% $50.00 38T 8 different values, 15 pcs. min. per values For Online Kit Orders, Catalog & Application Notes, Visit: www.atceramics.com Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atce- ramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 2003 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-976; Rev M, 1/15 A M E R I C A N T E C H N I C A L C E R A M I C S ATC North America ATC Europe ATC Asia sales@atceramics.com saleseur@atceramics.com sales@atceramics-asia.com w w w . a t c e r a m i c s . c o m 4