8 7 6 5 4 3 2 1 VICOR CONFIDENTIAL REVISIONS THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR F HDEISRCELWOISTEHD I SIN N WOHT OTLOE B OER R IENP PRAORDTU TCOE DA,N UYSOENDE OWRIT HOUT REV DESCRIPTION DATE APPROVED F THE PERMISSION OF VICOR CORP. .97 1 RELEASED PER E060499 PEI 02/16/06 MB 2 REVISED PER E063650 PEI 03/13/06 MB 2 3 1 3 REVISED PER E060905 BW 07/28/06 MB 4 REVISED PER E072040 JS 09/06/07 SG 5 REVISED PER E091875 JS 10/20/09 REJH E E 3 1.16 6 REVISED PER E092163 GCK 12/04/09 MH 7 REVISED PER E101309 KUK 10/22/10 AR 5 REF: ISOLATION INSULATOR (FR4) 4 2 SEE NOTES 5 & 7 2 5 1 1.058 MAX D SEE NOTE 7 D .125 4 WIRE GAUGE TABLE REF. - ISOLATION INSULATOR PN# WIRE GAUGE PIN DIAMETER AFTER .805 MAX (FR4) - SEE NOTE 5 TINNING (+/-.003") 31741 #21 0.030" A A 31742 #19 0.036" C C 31743 #16 0.051" .38 MAX .065 .25MIN NO EXPOSED INSULATION 31744 #16 0.051" OR COPPER SEE NOTE 9 1.00 .60 (LEAD SPACING MEASURED AT DATUM A) (LEAD SPACING MEASURED AT DATUM A) MARK THIS SURFACE WITH B NOTES: PART NO., & DATE CODE B 1. ASSEMBLY TO BE FREE OF NICKS. 2. WINDINGS TO BE EVENLY SPACED. 3. RoHS COMPLIANT. LEAD FREE PER CST-0001 LATEST REVISION. DRAWN DATE VICOR SWD 4. GENERAL WORKMANSHIP STANDARDS FOR MAGNETIC COMPONENTS PER WS-0002. 5. ITEMS 3 & 4 SUPPLIED BY VENDOR AT ASSEMBLY. P.E.IENI 11/02/05 6. ALL PARTS FLAME RATED MIN U.L. 94V-0. MATERIAL UNLESS OTHERWISE SPECIFIED 7. APPLY ADHESIVE (ITEM 5) TO THE BASE OF ISOLATION INSULATOR (ITEM 3) AND TO ALL LEADS ON DIMENSIONS ARE INCH [MM] IND TOR 1.03 DIA 2W SEE NOTES TOLERANCES ARE: THE TOP SURFACE OF THE BOARD. DECIMALS ANGLES ASSY DWG X.XX [X.X] = ±0.01 [0.25] ±1° 8. DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION. X.XXX [X.XX] = ±0.005 [0.127] 9. SEE TABLE FOR WIRE GAUGE DIMENSIONS. FINISH THIRD ANGLE PROJECTION SIZE CAGE CODE DWG NO REV A 10. LEADS MAY BE TINNED WITH SN96/AG4 OR SAC305 (SN 96.5, AG 3.0, CU 0.5) OR VICOR APPROVED A SEE NOTES B 67131 31895 7 EQUIVALENT. 11. DIMENSONS ARE INCHES ONLY. SCALE 2 : 1 SHEET 1 OF 1 DO NOT SCALE DRAWING 8 7 6 5 4 3 2 1