Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPC Features ● Low ESR (9 mΩ to 30 mΩ) ● Large capacitance (2700 μF max.) ● RoHS compliance, Halogen free Specifi cations Size code B6 C6 E7 E12 F12 Category temperature range –55 °C to +105 °C Rated voltage range 2.5 V.DC to 16 V.DC 2.5 V.DC Rated capacitance range 39 μF to 180 μF 68 μF to 560 μF 120 μF to 680 μF 270 μF to 1500 μF 2700 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Damp heat Capacitance change Within ±20 % of the initial value (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. W – P D H C Polarity marking (−) f Lot. No. + L R Series Unit : mm Size fD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2 code −0.4 R. Capacitance B6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 R. Voltage C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 ✽ Externals of fi gure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Feb. 2017

Conductive Polymer Aluminum Solid Capacitors Characteristics list Case size (mm) Specifications Standard (Reel size : f380) Rated Rated Size Ripple ✽1 ESR Min. Series voltage capacitance LC ✽3 fD L code current 100 kHz/20 °C 300 kHz/20 °C tan d ✽2 Part number Packaging Q'ty (V.DC) (μF) (μA) (mAr.m.s.) (mΩ max.) (mΩ max.) (pcs) 5.0 5.9 1970 30 26 0.12 300 2R5SVPC180M 1500 180 5.0 5.9 B6 2200 24 20 0.12 300 2R5SVPC180MY 1500 5.0 5.9 2800 19 16 0.12 300 2R5SVPC180MV 1500 6.3 5.9 2410 25 22 0.12 300 2R5SVPC390M 1000 390 6.3 5.9 C6 3160 15 13 0.12 300 2R5SVPC390MV 1000 2.5 560 6.3 5.9 3500 16 14 0.12 300 2R5SVPC560M 1000 680 8.0 6.9 E7 3370 20 17 0.12 500 2R5SVPC680M 1000 820 8.0 11.9 5380 9 8 0.15 500 2R5SVPC820M 400 E12 1500 8.0 11.9 5150 10 9 0.15 750 2R5SVPC1500M 400 2700 10.0 12.6 F12 5070 12 10 0.15 1350 2R5SVPC2700M 400 5.0 5.9 1970 30 26 0.12 300 4SVPC150M 1500 150 5.0 5.9 B6 2240 23 20 0.12 300 4SVPC150MY 1500 5.0 5.9 2730 20 17 0.12 300 4SVPC150MV 1500 6.3 5.9 2320 27 23 0.12 300 4SVPC330M 1000 330 6.3 5.9 C6 2630 21 18 0.12 300 4SVPC330MY 1000 4.0 6.3 5.9 3160 15 13 0.12 300 4SVPC330MV 1000 8.0 6.9 E7 3220 22 19 0.12 500 4SVPC560M 1000 560 8.0 11.9 5380 9 8 0.15 500 4SVPC560MX 400 1200 8.0 11.9 E12 4700 12 10 0.15 960 4SVPC1200M 400 1500 8.0 11.9 4700 12 10 0.15 1200 4SVPC1500M 400 5.0 5.9 1970 30 26 0.12 300 6SVPC100M 1500 SVPC 100 5.0 5.9 B6 2150 25 21 0.12 300 6SVPC100MY 1500 120 5.0 5.9 2660 21 18 0.12 300 6SVPC120MV 1500 6.3 5.9 2320 27 23 0.12 300 6SVPC220M 1000 6.3 220 6.3 5.9 C6 3160 15 13 0.12 300 6SVPC220MV 1000 330 6.3 5.9 3390 17 15 0.12 415 6SVPC330M 1000 390 8.0 6.9 E7 3220 22 19 0.12 491 6SVPC390M 1000 820 8.0 11.9 E12 4700 12 10 0.15 1033 6SVPC820M 400 5.0 5.9 1970 30 26 0.12 300 10SVPC68M 1500 68 B6 5.0 5.9 2540 23 20 0.12 300 10SVPC68MV 1500 6.3 5.9 2320 27 23 0.12 300 10SVPC120M 1000 10 120 C6 6.3 5.9 2600 22 19 0.12 300 10SVPC120MV 1000 270 8.0 6.9 3220 22 19 0.12 500 10SVPC270M 1000 E7 330 8.0 6.9 3460 19 17 0.12 660 10SVPC330M 1000 5.0 5.9 1820 35 30 0.12 300 16SVPC39M 1500 39 B6 5.0 5.9 2350 27 23 0.12 300 16SVPC39MV 1500 6.3 5.9 2200 30 26 0.12 300 16SVPC68M 1000 68 6.3 5.9 C6 2440 25 22 0.12 300 16SVPC68MV 1000 16 100 6.3 5.9 2490 24 23 0.12 300 16SVPC100M 1000 120 8.0 6.9 2900 27 23 0.12 500 16SVPC120M 1000 E7 150 8.0 6.9 3220 22 21 0.12 500 16SVPC150M 1000 270 8.0 11.9 E12 4070 16 14 0.15 864 16SVPC270M 400 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 tan d (120 Hz/+20 °C) ✽3 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coeffi cient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Feb. 2017

Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19