12 11 10 9 8 7 6 5 4 3 2 1 CKTS A B C .004 ± B OPTIONAL VOIDED CIRCUIT ±0.10 .380 .118 .559 .050 2 SEE CHART FOR LOCATIONS LAST CIRCUIT 9.65 3.00 14.20 .025 H TYP 1.27 TYP .118 .004 H ± .498 .236 .677 0.64 3.00 0.10 3 .115 ± 12.65 6.00 17.20 NON-ACCUM. 2.92 TYP .616 .354 .795 4 15.65 9.00 20.20 .734 .472 .913 CIRCUIT 1 5 18.65 12.00 23.20 .273 .003 ± .852 .591 1.031 6.93 0.08 TYP 6 ± 21.65 15.00 26.20 .970 .709 1.150 G 7 G 24.65 18.00 29.20 .220 .002 .135 ± 1.089 .827 1.268 3.43 8 .05 5.60±0.05 .065 27.65 21.00 32.20 TYP TYP 2 1.3 1.65 1.207 .945 1.386 .004 ± 9 C TYP 2 30.65 24.00 35.20 0.10 ± .08 1.325 1.063 1.504 A 10 2.0 PCB LAYOUT: COMPONENT SIDE 33.65 27.00 38.20 TYP 1.443 1.181 1.622 F B .390 11 F .047 SOLDER NAIL 36.65 30.00 41.20 9.90 .118 1.20 1.561 1.299 1.740 12 3.00 .006 39.65 33.00 44.20 MAX TYP 0.15 NOTE 8 .172 4.37 .400 E E MAX 10.16 .08 RECEPTACLE #43645 REF .13 .42 2.0 LOCATION DETAIL COPLANARITY DETAIL 3.2 10.7 SEE NOTE 7 SEE NOTE 6 LAST CIRCUIT REF .18 CIRCUIT 1 4.6 FINISH A FINISH B FINISH C CKTS MATERIAL NO: MATERIAL NO: VOID CKT MATERIAL NO: VOID CKT D 02 43650-0212 43650-0213 43650-0214 D 03 43650-0312 43650-0313 43650-0314 04 43650-0412 43650-0413 43650-0414 NOTES: 05 43650-0512 43650-0513 43650-0514 1. HOUSING MATERIAL: LIQUID CRYSTAL POLYMER, GLASS FILLED, UL94V-0, COLOR: BLACK TERMINAL MATERAIL: BRASS ALLOY 06 43650-0612 43650-0613 43650-0614 2. FINISH: A = .000060/(0.00152) MIN. REFLOWED MATTE TIN OVER 07 43650-0712 43650-0713 43650-0714 .691 .000050/(0.00127) MIN. NICKEL 08 43650-0812 43650-0813 43650-0814 17.56 (FINISH IS BRIGHT IN APPEARANCE, C C THICKNESS AS APPLIED PRIOR TO REFLOW) 09 43650-0912 43650-0913 43650-0914 B = .000015/(0.00038) MIN. SELECT GOLD IN CONTACT AREA 10 43650-1012 43650-1013 43650-1014 .000100/(0.00254) MIN. SELECT MATTE TIN ON SOLDER TAILS 11 43650-1112 43650-1113 43650-1114 BOTH OVER .000050/(0.00127) NICKEL OVERALL 12 43650-1212 43650-1213 43650-1214 C = .000030/(0.00076) MIN. SELECT GOLD IN CONTACT AREA .000100/(0.00254) MIN. SELECT MATTE TIN ON SOLDER TAILS 03 43650-1314 02 MATED MICRO FIT CONNECTOR BOTH OVER .000050/(0.00127) NICKEL OVERALL 04 43650-1413 02 3. PRODUCT SPECIFICATION: PS-43650 04 43650-9413 02, 03 B B 4. TAPE & REEL PACKAGED PER MOLEX DRAWING 436500001-PK 5. MATES WITH MICRO FIT (3.0) RECEPTACLE SERIES 43645 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: UPDATE NOTE 4 6. THE COPLANARITY DIMENSION IS ESTABLISHED BY PLACING THE ASSEMBLY = 0 IN/MM NTS ON A FLAT SURFACE. THE DISTANCE FROM THAT SURFACE TO THE BOTTOM OF ANY TERMINAL OR NAIL MUST NOT EXCEED .006/0.15 = 0 GENERAL TOLERANCES (UNLESS SPECIFIED) 7. TO AVOID INTERFERENCE BETWEEN RECEPTACLE AND PCB, HEADER MUST BE PLACED = 0 MM INCH EC NO: 172616 MICRO FIT (3.0) RIGHT ANGLE SMT NAILS WITHIN .400/(10.16) MAX. FROM EDGE OF PCB, AS SHOWN IN LOCATION DETAIL. = 0 4 PLACES ± ± DRWN: ANESSER 2018/02/21 SINGLE ROW / TAPE AND REEL 3 PLACES ± ± 0.01 CHK'D: SSOUSEK 2018/04/25 8. METAL TAB MAY BE FLUSH WITH PCB. = 0 2 PLACES ± 0.25 ± 0.014 APPR: FSMITH 2018/04/27 PRODUCT CUSTOMER DRAWING A 9. PARTS CONFORM TO CLASS 'B' REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. = 0 1 PLACE ± 0.36 ± INITIAL REVISION: A DOCUMENT NUMBER DOC TYPE DOC PART REVISION 10. TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY = 0 0 PLACES ± ± DRWN: SAMIEC 2000/07/07 SD-43650-005 E6 PSD 001 DEPENDING ON PART NUMBER AND/OR TOOL. ANGULAR TOL ± 0.5 ° APPR: FSMITH 2016/03/18 = 0 DRAFT WHERE APPLICABLE THIRD ANGLE PROJECTION DRAWING SERIES MATERIAL NUMBER CUSTOMER SHEET NUMBER DOCUMENT STATUS P1 RELEASE DATE 2018/04/27 21:51:21 C = 0 WITMHUINS TD IRMEEMNASIINONS C-SIZE 43650 SEE CHART GENERAL MARKET 1 OF 1 FORMAT: Eng-lega-master-tb-prod-C12 11 10 9 8 7 6 5 4 3 2 1 REVISION: D DATE: 2018/01/18