™ Z8 Encore! MC Flash Microcontrollers Z8FMC16100 Series Product Brief PB016607-0308 Product Block Diagram providing Pulse-by-Pulse or latched fast shutdown of the PWM pins during fault condition. 12-Bit PWM 16-Bit Timer Z8FMC16100 Series MCU features up to eight Operational Module for Capture/ single-ended channels of 10-bit analog-to-digital Amplifier Motor Control Compare/PWM conversion, with a sample and hold circuit. It also features one operational amplifier for current Up to 16 KB 8-Channel sampling and one comparator for over-current Flash 10-Bit ADC limiting or shutdown. 20 MHz 512 B SRAM eZ8™CPU VBO/POR A high-speed analog-to-digital converter (ADC) I2C, SPI, and and enables voltage, current, and back-EMF sensing, Reset Control while dual-edge interrupts and a 16-bit timer UART with LIN provide a Hall-effect sensor interface. Internal Watchdog Single-Pin A full-duplex 9-bit UART provides serial, Precision Timer Debugger asynchronous communication and supports the Oscillator local interconnect network (LIN) serial Comparator Interrupt Controller communications protocol. The LIN bus is a cost-efficient Single Master, Multiple Slave 17 General Purpose I/O Pins organization that supports speed up to 20 kbps. Included in its rich-set of peripherals are other features such as: one additional 16-bit timer with Overview Capture/Compare/PWM capability, SPI or I2C Master/Slave for serial communication, and an Zilog’s Z8FMC16100 Series Flash microcontrol- lers, a part of the Z8 Encore! MC™ family of motor internal precision oscillator (IPO). control devices, are based on Zilog’s advanced The single-pin debugger and programming eZ8™ 8-bit CPU core. Optimized for motor con- interface simplifies code development and allows trol applications, these devices support the control easy in-circuit programming. of Single and Multiphase variable-speed motors. Target applications are large appliances, small Z8FMC16100 Series MCU appliances, HVAC, automotive, power tools, and Features personal care devices. Z8FMC16100 Series Flash MCUs feature a The features of Z8FMC16100 Series MCU flexible pulse width modulator (PWM) module include: with three complementary pairs or six independent • 20 MHz eZ8 CPU core PWM outputs supporting dead-band operation and fault protection trip input. These features provide • Up to 16 KB Flash program memory multiphase control capability for a variety of motor • 512 B register SRAM types and ensure safe operation of the motor by Copyright ©2008 by Zilog®, Inc. All rights reserved. www.zilog.com

Z8FMC16100 Series • Fast 8-channel 10-bit ADC for current eZ8™ CPU Features sampling and back-EMF detection The features of eZ8 CPU include: • 12-bit PWM module with three complemen- tary pairs or six independent PWM outputs • New instructions for improved performance with dead-band generation and fault trip input including BIT, BSWAP, BTJ, CPC, LDC, LDCI, LEA, MULT, and SRL • One 16-bit timer with Capture/Compare/PWM capability • Compatible with existing Z8® code • One analog comparator for current limiting or • Up to 10 MIPS operation over current shutdown • C-Compiler friendly • One operational amplifier provides current • 2 to 9 clock cycles per instruction level-shifting and amplification for ADC current sampling • I2C in MASTER, SLAVE, and MULTIMAS- TER modes • SPI controller • UART with LIN interface • Internal Precision Oscillator (IPO) • Oscillator supports either internal IPO or external crystals and ceramic resonators • 17 General-Purpose I/O pins (GPIO) • Voltage Brownout/Power-On Reset (VBO/ POR) • Watchdog Timer (WDT) with internal RC oscillator • Single-Pin On-Chip Debugger • In-circuit serial programming • Operating at 2.7 V to 3.6 V • 32-pin QFN and LQFP packages • Lead-free packaging option • Standard and extended temperature ranges: 0 ºC to 70 ºC (standard) and –40 ºC to +105 ºC (extended) • Up to 20 interrupts with configurable priority PB016607-0308 Page 2 of 7

Z8FMC16100 Series Architecture Figure1 displays the Z8FMC16100 Series MCU block diagram. 3 Analog Supply 2 Digital Supply and Reference UART with LIN Interrupt Control and IrDA 1 I2C Reset Control Master/Slave 8 Port A SPI Watchdog Timer Comparator RC Oscillator Operational Internal Precision Amplifier Oscillator Fault Shutdown Oscillator Control 2 Internal/External 8-Channel Multiplexer 8 eZ8 Port B 20 MHz CPU Sample and Hold A/D Converter 1 Debugger 16-Bit Counter/ Timer/PWM 1 Register File (RAM) Port C 512 B x 8 6 12-Bit PWM Module for Motor Control Flash Program Memory Up to 16 KB x 8 Figure 1. Z8FMC16100 Series MCU Block Diagram PB016607-0308 Page 3 of 7

Z8FMC16100 Series Ordering Information Table 1 provides the basic features available for each device within the Z8FMC16100 Series product line. Table 2 provides ordering information for the Z8FMC16100 Series products, by part number. See Part Number Suffix Designations on page6 for product numbering details. Table 1. Z8FMC16100 Series Part Selection Guide Product Feature Z8FMC16100 Z8FMC08100 Z8FMC04100 Flash (KB) 16 8 4 SRAM (B) 512 512 512 General-Purpose I/O 17 17 17 Motor Control PWM Channels 6 6 6 ADC Inputs 8 8 8 Operational Amplifier Yes Yes Yes Comparator Yes Yes Yes 16-bit Standard Timers with Capture, Compare, Yes Yes Yes PWM UART with support for LIN and IrDA Yes Yes Yes 2 I C Yes Yes Yes SPI Controller Yes Yes Yes Watchdog Timer Yes Yes Yes 5.5296 MHz Internal Precision Oscillator Yes Yes Yes Each of the parts listed in Table 2 is available in a lead-free package that conforms to responsible environmental standards. For more information regarding ordering, contact your local Zilog® sales office. Zilog web site, www.zilog.com, lists all regional offices and provides additional Z8FMC16100 Series product information. PB016607-0308 Page 4 of 7

Z8FMC16100 Series Table 2.Ordering Information for the Z8FMC16100 Series Products* Flash Max. KB SRAM Speed Trimmed 2 Part Number (Bytes) Bytes GPIO (MHz) I C/SPI IPO Package Temp (ºC) Z8FMC16100 with 16 KB Flash and 512 B SRAM Z8FMC16100QKSG 16 512 17 20 I2C/SPI Y QFN-32 0 to +70 Z8FMC16100QKEG (16,384) –40 to +105 Z8FMC16100AKSG 16 512 17 20 I2C/SPI Y LQFP-32 0 to +70 Z8FMC16100AKEG (16,384) –40 to +105 Z8FMC08100 with 8 KB Flash and 512B SRAM Z8FMC08100QKSG 8 512 17 20 I2C/SPI Y QFN-32 0 to +70 Z8FMC08100QKEG (8,192) –40 to +105 Z8FMC08100AKSG 8 512 17 20 I2C/SPI Y LQFP-32 0 to +70 Z8FMC08100AKEG (8,192) –40 to +105 Z8FMC04100 with 4 KB Flash and 512B SRAM Z8FMC04100QKSG 4 512 17 20 I2C/SPI Y QFN-32 0 to +70 Z8FMC04100QKEG (4,096) –40 to +105 Z8FMC04100AKSG 4 512 17 20 I2C/SPI Y LQFP-32 0 to +70 Z8FMC04100AKEG (4,096) –40 to +105 Z8FMC16100 Series Development Tools Z8FMC160100KITG Z8FMC16100 Series Development Kit Z8FMC161000ZEM Z8 Encore! Z8FMC16100 Series In-Circuit Emulator Development Tool ZUSBOPTSC01ZACG USB Opto-isolated Smart Cable Accessory Kit Z8FMC16100 Series Development Tools *Factory programming of the devices in this table are available upon request from Zilog®. PB016607-0308 Page 5 of 7

Z8FMC16100 Series Part Number Suffix Designations Zilog part numbers consist of a number of components. This section describes an example part number, Z8FMC16100QKSG, to indicate each components’ description. Z8 FMC 16 100 Q K S G Environmental Flow C = Plastic Standard G = Lead Free Temperature Range (°C) S = 0 ºC to +70 ºC E = –40 ºC to +105 ºC Pin Count K= 32 Package A = LQFP Q = QFN Product Family and Feature Sets Memory Size 16 = 16 KB Flash 8 = 8 KB Flash 4 = 4 KB Flash FMC = Flash Motor Controller Device Family Z8 = Zilog’s 8-bit Microcontroller PB016607-0308 Page 6 of 7

Z8FMC16100 Series Warning: DO NOT USE IN LIFE SUPPORT LIFE SUPPORT POLICY ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION. As used herein Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Document Disclaimer ©2008 by Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this document has been verified according to the general principles of electrical and mechanical engineering. Z8, Z8 Encore!, eZ8, and Z8 Encore! MC are trademarks or registered trademarks of Zilog, Inc. All other product or service names are the property of their respective owners. PB016607-0308 Page 7 of 7