C 24 Watts xppower.com D VCP Series - C A • Low Cost • Output Voltages from 5 to 24 V • PCB Mount • Open Frame & Encapsulated Versions • IT & Medical Approvals • Class II Construction • No Load Input Power <0.3 W BR AND Specification Input General Input Voltage • 90-264 VAC Efficiency • See table Input Frequency • 47-63 Hz Isolation • 4000 VAC Input to Output Input Current • 0.6 A max at 90 VAC Switching Frequency • 65 kHz typical Inrush Current • 40 A max at 240 VAC, cold start at 25 °C MTBF • 250 kHrs to MIL-HDBK-217F at 25 °C, GB Power Factor • EN61000-3-2, class A No Load Input Power • <0.3 W Environmental Input Protection • Internal T2.0A/250 V fuse in line Operating Temperature • 0 °C to +70 °C, derate from 100% load at 50 °C to 50% load at 70 °C Output Cooling • Natural convection Operating Humidity • 5-90% RH, non-condensing Output Voltage • See table Storage Temperature • -20 °C to +80 °C Initial Set Accuracy • ±2% at 50% load Vibration • 10-300 Hz, 2 g 15 mins/sweep. 30 mins for Minimum Load • No minimum load required each of 3 axes Start Up Delay • 2 s max Start Up Rise Time • 50 ms typical EMC & Safety Hold Up Time • 5 ms typical at full load and 115 VAC Emissions • EN55011/22, level B conducted & radiated Line Regulation • ±0.5% max Harmonic Currents • EN61000-3-2, class A Load Regulation • 2% max, 0-100% load Voltage Flicker • EN61000-3-3 Transient Response • 10% max. deviation, recovery to <1% ESD Immunity • EN61000-4-2, ±4kV indirect contact, within 500 µs for a 50% step load change ±8kV air, Perf Criteria A at 0.2 A/µs Radiated Immunity • EN61000-4-3, 3 V/m, Perf Criteria A Ripple & Noise • See table EFT/Burst • EN61000-4-4, level 2, Perf Criteria A Overvoltage Protection • See table Surge • EN61000-4-5, installation class 3, Overload Protection • 120-280 %, auto recovery Perf Criteria A Short Circuit Protection • Trip and restart (hiccup mode) Conducted Immunity • EN61000-4-6, 3 V, Perf Criteria A Temperature • 0.2 %/°C Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria A Coefficient Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals • EN60950-1, cUL60950-1, IEC60950-1, EN60601-1, cUL60601-1, IEC60601-1

VCP24 A Models and Ratings C - Output Power Output Voltage(2) Output Current Ripple & Noise(1) OVP Setting(3) Efficiency(5) Model Number(4) D C 12.5 W 5.0 V 2.5 A 100 mV 10.0 V 73% VCP24US05 24.0 W 12.0 V 2.0 A 100 mV 20.0 V 80% VCP24US12 24.0 W 15.0 V 1.6 A 150 mV 25.0 V 81% VCP24US15 24.0 W 24.0 V 1.0 A 200 mV 35.0 V 82% VCP24US24 Notes 1. Measured at DC output connectors using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals. 2. Other voltages between 5.0 V and 24.0 V are available, consult sales for details. 3. Typical trip point. 4. For encapsulated versions, add suffix ‘-E’ to the model number, e.g. VCP24US12-E 5. Average of efficiencies measured at 25%, 50%, 75% & 100% load and 230 VAC input. Mechanical Details Open Frame Version Encapsulated Version (-E) 2.91 (73.8) 1.45 (36.9) 1.39 (3 5.3) 1.04 (26.5) 1.39 (35.3) 0.80 (20.2) 0.72 (18.5) 0.80 (20.2) 5 2 1 1.64 (41.6) 0.710.72(18.0)(18.5) 4 5 3 TOP VIEW 2 1 0.68 (17.4) 4 3 TOP VIEW 0.68 (17.4) 1.81 (46.0) 11..1360 ((2393..51)) 1.04 (26.5) 0.71 (18.0) 1.30 (33 .1) 1.16 (29.5) 3.11 (79.0) ø 0.07 0.76 (19.4) 1.15 (29.3) 0.14 (3.8) 0.06 (1.6) 0.15 (3.8) ø((øø 011...0084)) 0.18 (4.50) 1.12 (28.5) ø(ø 01..004) Pin Designation 1 Live 2 Neutral 3 Output +VE 4 Output -VE 5 N/C Notes 1. All dimensions are in inches (mm). 2. Weight: open frame versions: 0.165 lbs (75 g) approx, encapsulated versions 0.32 lbs (150 g) approx. 3. Tolerance: x.xx = ±0.04 (x.x = ±0.1); x.xxx = ±0.2 (x.xx = ±0.5) 27-Jun-17