ALUMINUM ELECTROLYTIC CAPACITORS UZR 3.95mmL MAX. Chip Type UZS Chip type with 3.95mmLMAX height. Designed for surface mounting on high density PC board. Smaller Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UZR Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Rated voltage ( V) 4 6.3 10 16 25 35 50 120Hz 20°C Tangent of loss angle (tan δ) tan δ ( MAX.) 0.50 0.30 0.24 0.19 0.16 0.14 0.14 Rated voltage (V) 4 6.3 10 16 25 35 50 120Hz Stability at Low Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 Temperature ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 8 4 4 3 3 The specifications listed at right shall be met when the Capacitance change Within ±30% of the initial capacitance value Endurance capacitors are restored to 20°C after the rated voltage is tan δ 300% or less than the initial specified value applied for 1000 hours at 85°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause Shelf Life 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is maintained at Capacitance change Within ±10% of the initial capacitance value Resistance to 250°C. The capacitors shall meet the characteristic requirements listed at right tan δ Less than or equal to the initial specified value soldering heat when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) Positive Voltage (C : 16V) Plastic platform X. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Lot No. Series 0.3MAX. C±0.2 MA U Z R 1 C 1 0 0 MC L 1 G B 0.5 Taping code A210CZR D±0.5φ B±0.2 A±0.3A±0.3E φABD 144..83 255..13 (626m...346m) CapaRcaittaendc cea tpoalecriCataonnnccefeig ( u(±1r2a00tµi%oFn)) Capacitance 3.90+–00..205 0.5 to 0.8 Negative CE 41..30 51..33 62..62 Rated voltage (16V) Voltage Series name V 4 6.3 10 16 25 35 50 Type Code g j A C E V H Dimensions V 4 6.3 10 16 25 35 50 Cap. (μF) Code 0G 0J 1A 1C 1E 1V 1H 1 010 4 　 8.4 2.2 2R2 4 13 3.3 3R3 4 17 4.7 4R7 4 16 4 18 5 20 10 100 4 23 5 27 5 29 6.3 33 22 220 4 28 5 33 5 37 6.3 42 6.3 46 33 330 4 28 5 37 5 41 6.3 49 6.3 52 47 470 4 33 5 45 6.3 52 6.3 58 100 101 5 56 6.3 70 220 221 6.3 96 CφaDs(em smiz)e Rripapteled Rated ripple current (mArms) at 85°C 120Hz Taping specifications are given in page 23. Frequency coefficient of rated ripple current Recommended land size soldering by reflow are given Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more in page 18,19. Coefficient 0.70 1.00 1.17 1.36 1.50 Please refer to page 3 for the minimum order quantity. 108 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UZR0J330MCR1GB UZR1C100MCL1GB UZR1E330MCL1GB UZR0G330MCL1GB UZR0G470MCL1GB UZR0G101MCL1GB UZR0G221MCL1GB UZR0J220MCL1GB UZR0J330MCL1GB UZR0J470MCL1GB UZR0J101MCL1GB UZR1A220MCL1GB UZR1A330MCL1GB UZR1A470MCL1GB UZR1C220MCL1GB UZR1C330MCL1GB UZR1C470MCL1GB UZR1E4R7MCL1GB UZR1E220MCL1GB UZR1V220MCL1GB UZR1H0R1MCL1GB UZR1HR22MCL1GB UZR1HR33MCL1GB UZR1HR47MCL1GB UZR1H010MCL1GB UZR1H2R2MCL1GB UZR1H3R3MCL1GB UZR1H4R7MCL1GB UZR1H100MCL1GB UZR1V100MCL1GB UZP1V4R7MCL1GB UZR1E100MCL1GB