TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series FEATURES • Large case size for maximum capacitance • 3x reflow 260°C compatible • Low profile solution LEAD-FREE COMPATIBLE COMPONENT • Consumer applications (e.g. PCMCIA/USB wireless express cards etc.) • CV range: 1000-3300μF / 4-10V • 2 case sizes available APPLICATIONS • Data transfer modems • SSD backup circuits CASE DIMENSIONS:millimeters (inches) EIA EIA L±0.20 W+0.20 (0.008) W±0.10 W±0.10 A±0.10 A±0.10 Code H max. P N P N S Min. Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004) 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 6 5831 14878-20 14.80 (0.583) 7.80 (0.307) 2.00 (0.079) 5.50 (0.217) 5.50 (0.217) 2.45 (0.096) 2.45 (0.096) 9.90 (0.390) MARKING 4, 6 CASE Capacitance Value in mF Polarity Band (Anode+) 228 = 2.2mF Rated Voltage W L W J = 6.3V Polarity 228 J AVX LOGO H Band (Anode+) XXXXX ID Code WP AP S AN WN HOW TO ORDER TLN 6 228 M 006 R 0055 Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in mΩ See table pF code: 1st two digits M = ±20% 004 = 4Vdc R = Pure Tin 7" Reel above represent significant figures, 006 = 6.3Vdc 3rd digit represents multiplier 010 = 10Vdc TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25°C Capacitance Range: 1000 μF to 3300 μF Capacitance Tolerance: ±20% Leakage Current DCL: 0.01CV Rated Voltage (V ) -55°C (cid:2)+40°C: 4 6.3 10 R Category Voltage (V ) at 85°C: 2 3.2 5 C Category Voltage (V ) at 125°C: 0.8 1.3 2 C Temperature Range: -55°C to +125°C with category voltage Reliability: 0.2% per 1000 hours at 85°C, 0.5xV with 0.1Ω/Vseries impedance with R 60% confidence level 54 030918

TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series CAPACITANCE AND RATED VOLTAGE RANGE (FIGURE DENOTES CASE SIZE) Capacitance Voltage Rating DC (V ) to 85°C R μF Code 4V (G) 6.3V (J) 10V (A) 680 687 1000 108 4(100)/6(55) 1500 158 4(100) 6(55) 2200 228 6(55) 3300 338 6(55) Released ratings(ESR ratings in mOhms in parentheses) Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE ESR AVX Case Capacitance Rated Rated Category Category DCL Max. 1 0 0 k H z R M S C u r r e n t ( m A ) Part No. Size (μF) V o ltage Temperature Voltage Temperature Max. @ 100kHz MSL ( V ) ( º C ) ( V ) ( º C ) ( μ A ) (mΩ) 25ºC 85ºC 125ºC 4 Volt @ 40°C TLN6338M004#0055 6 3300 4 40 0.8 125 132 55 2045 1840 818 3 6.3 Volt @ 40°C TLN4158M006#0100 4 1500 6.3 40 1.3 125 90 100 1285 1156 514 3 TLN6228M006#0055 6 2200 6.3 40 1.3 125 132 55 2045 1840 818 3 10 Volt @ 40°C TLN4108M010#0100 4 1000 10 40 2 125 100 100 1285 1156 514 3 TLN6108M010#0055 6 1000 10 40 2 125 100 55 2045 1840 818 3 TLN6158M010#0055 6 1500 10 40 2 125 150 55 2045 1840 818 3 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalogue limit post mounting DCL allowed to move up to 2.00 times catalogue limit post mounting For typical weight and composition see page 273. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. 030918 55

TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series QUALIFICATION TABLE TLN PulseCapTMseries (Temperature range -55ºC to +125ºC) TEST Condition Characteristics Visual examination no visible damage Apply rated voltage (Ur) at 40ºC and / or category Endurance voltage (Uc) at 85ºC for 2000 hours through a DCL 2 x initial limit circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within +5/-30% of initial value temperature for 1-2 hours before measuring. ESR 1.25 x initial limit Visual examination no visible damage Store at 65ºC and 90-95% relative humidity for Humidity 500 hours, with no applied voltage. Stabilize at DCL 2 x initial limit room temperature and humidity for 1-2 hours ΔC/C within ±10% of initial value before measuring. ESR 1.25 x initial limit Step Temperature°C Duration(min) +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC 1 +20 15 Temperature 2 -55 15 DCL 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL* 3 +20 15 Stability 4 +85 15 ΔC/C n/a +5/-20% ±10% +20/-0% +25/-0% ±10% 5 +125 15 6 +20 15 ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* Apply 1.3x rated voltage (Ur) at 40ºCfor 1000 Visual examination no visible damage Surge cycles of duration 6 min (30 sec charge, 5 min DCL 2 x initial limit Voltage 30 sec discharge) through a charge / discharge ΔC/C within ±5% of initial value resistance of 1000Ω ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit Mechanical MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value Shock DF initial limit ESR initial limit Visual examination no visible damage DCL initial limit Vibration MIL-STD-202, Method 204, Condition D ΔC/C within ±5% of initial value DF initial limit ESR initial limit *Initial Limit Voltage vs Temperature Rating 120% rated range recommended derating 100% 100% 100% 80% 80% 80% 60% 67% 50% 40% 33% 20% 20% 0% -55°C 0°C 40°C 60°C 85°C 105°C 125°C 56 030918

TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO 2 030918 57