September 2008 TLE4946-2K High Precision Hall Effect Latch TLE4946-2K Final Datasheet Rev.1.0 Sensors

Edition 2008-09-18 Published by Infineon Technologies AG 81726 München, Germany © 2007 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

TLE4946-2K TLE4946-2K High Precision Hall Effect Latch Revision History: 2008-09-18, Rev.1.0 Previous Version: Page Subjects (major changes since last revision) We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: sensors@infineon.com FinalDatasheet 3 Rev.1.0, 2008-09-18

TLE4946-2K 1 Product Description 5 1.1 Overview 5 1.2 Features 5 1.3 Target Applications 5 2 Functional Description 5 2.1 General 5 2.2 Pin Configuration 6 2.3 Pin Description 6 2.4 Block Diagram 6 2.5 Operating Modes and States 7 2.6 Functional Block Description 7 3 Specification 8 3.1 Absolute Maximum Ratings 8 3.2 Operating Range 9 3.3 Characteristics 9 4 Package Information 10 4.1 Package Outline 10 FinalDatasheet 4 Rev.1.0, 2008-09-18

High Precision Hall Effekt Latch TLE4946-2K 1 Product Description 1.1 Overview The TLE4946-2K is a high precision Hall effect latch with highly accurate switching thresholds for operating temperatures up to 150°C. 1.2 Features • 2.7 V to 24 V supply voltage operation • Operation from unregulated power supply • High sensitivity and high stability of the magnetic switching points • High resistance to mechanical stress by active error compensation • Reverse battery protection (– 18V) • Superior temperature stability • Peak temperatures up to 195°C without damage • Low jitter (typ. 1 µs) • High ESD performance (± 4kV HBM) • Digital output signal • SMD package SC59 1.3 Target Applications The TLE4946-2K is an integrated circuit Hall-effect sensor with low switching thresholds and low hysteresis which make it ideally suited to detect the rotor position in a BLDC motor commutation application. 2 Functional Description 2.1 General Precise magnetic switching thresholds and high temperature stability are achieved by active compensation circuits and chopper techniques on chip. Offset voltages, generated by temperature induced stress or overmolding are canceled and high accuracy is achieved. The IC has an open collector output stage with 20mA current sink capability. A wide operating voltage range form 2.7V to 18V with reverse polarity protection up to -18V makes the device suitable for a wide range of applications. A magnetic south pole with field strength above B turns the op output on and a magnetic north pole exceeding B turns it off. rp Product Name Product Type Ordering Code Package Hall Effect Latch TLE4946-2K SP000472424 SC59 FinalDatasheet 5 Rev.1.0, 2008-09-18

TLE4946-2K Functional Description 2.2 Pin Configuration Center of Sensitive Area 3 0.8± 0.15 1 2 1.5± 0.15 SC59 Figure 1 Pin Configuration and sensitive area (Top View, Figure not to Scale) 2.3 Pin Description Table 1 Pin Description Pin or Ball Name Pin Function Comments No. Type 1 Vs I Supply voltage 2 Q O Output 3 GND I Ground 2.4 Block Diagram V S Voltage Regulator reverse polarity protected Bias and Oscillator Compensation and Circuits Sequencer Q Ref GND Amplifier Low Comparator Chopped Pass with Hall Probe Filter Hysteresis Figure 2 TLE4946-2K Block Diagram FinalDatasheet 6 Rev.1.0, 2008-09-18

TLE4946-2K Functional Description 2.5 Operating Modes and States Field Direction Definition: Positive magnetic fields are related with the south pole of the magnet to the branded side of package. Applied Magnetic B Field OP B RP t t d d t t f r V Q 90% 10% Figure 3 Timing diagram V Q B B 0 B rp op Figure 4 Output Signal 2.6 Functional Block Description The chopped Hall IC switch comprises a Hall probe, bias generator, compensation circuits, oscillator and output transistor. The bias generator provides currents for the Hall probe and the active circuits. Compensation circuits stabilize the temperature behavior and reduce technology variations. The Active Error Compensation rejects offsets in signal stages and the influence of mechanical stress to the Hall probe caused by molding and soldering processes and other thermal stresses in the package. This chopper technique together with the threshold generator and the comparator ensure high accurate magnetic switching points FinalDatasheet 7 Rev.1.0, 2008-09-18

TLE4946-2K Specification 3 Specification 3.1 Absolute Maximum Ratings Table 2 Absolute Maximum Ratings Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. Max. junction temperature T -40 – 150 °C J – – 155 for 2000 h (not additive) – – 165 for 1000 h (not additive) – – 175 for 168 h (not additive) – – 195 for 3 x 1 h (additive) Supply voltage V -18 – 18 V DD -18 – 24 for 1h, R ≥ 200Ω s -18 – 26 for 5min, R ≥ 200Ω s Supply current through I – 50 – + 50 mA S protection device Output voltage V -0.7 – 18 V Q -0.7 – 26 for 5min @ 1.2kΩ pull up Storage temperature T – 40 – 150 °C S Magnetic flux density B – unlimited mT ESD robustness V 4 kV According to ESD,HBM HBM: 1.5 kΩ, 100 pF EIA/JESD22-A114-B Attention:Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. FinalDatasheet 8 Rev.1.0, 2008-09-18

TLE4946-2K Specification 3.2 Operating Range The following operating conditions must not be exceeded in order to ensure correct operation of the TLE4946-2K. All parameters specified in the following sections refer to these operating conditions unless otherwise mentioned. Table 3 Operating Range Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Supply voltage V 2.7 – 18 V S Output voltage V – 0.7 – 18 V Q Junction temperature T – 40 – 150 °C j Output current I 0 – 20 mA Q 3.3 Characteristics Product characteristics involve the spread of values guaranteed within the specified voltage and ambient temperature range. Typical characteristics are the median of the production (at V = 12V and T = 25°C ). s A Table 4 Electrical Characteristics Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Supply current I 2 4 6 mA V = 2.7 V ... 18 V S S Reverse current I 0 0.2 1 mA V = – 18 V SR S Output saturation voltage V – 0.3 0.6 V I = 20 mA QSAT Q Output leakage current I – 0.05 10 µA for V = 18 V QLEAK Q Output fall time t – 0.02 1 µs R = 1.2 kΩ; f L Output rise time tr – 0.4 1 µs CL = 50 pF Chopper frequency f – 320 – kHz OSC Switching frequency f 0 – 15 1) kHz SW Delay time 2) t – 13 – µs d Output jitter 3) t – 1 – µs Typical value for QJ RMS square wave signal 1 kHz Power-on time 4) t – 13 – µs V ≥ 2.7 V PON S Thermal resistance 5) R – 100 K/W thJA 1) To operate the sensor at the max. switching frequency, the value of the magnetic signal amplitude must be 1.4 times higher than for static fields. This is due to the - 3 dB corner frequency of the low pass filter in the signal path. 2) Systematic delay between magnetic threshold reached and output switching 3) Jitter is the unpredictable deviation of the output switching delay 4) Time from applying V ≥ 2.7 V to the sensor until the output state is valid S 5) Thermal resistance from junction to ambient FinalDatasheet 9 Rev.1.0, 2008-09-18

TLE4946-2K Package Information Table 5 Magnetic Characteristics Parameter Symbol Values Unit Note/ Test Condition Min. Typ. Max. Operate point B 0.5 2.0 3.5 mT OP Release point B -3.5 -2.0 -0.5 mT RP Hysteresis B 1.0 4 6.0 mT HYS Magnetic Offset1) B -1.5 0 1.5 mT OFF Temperature compensation of TC -350 ppm/°C magn. thresholds Repeatability of magnetic B 20 µT REP RMS thresholds 2) 1) B = (B + B )/2 off op rp 2) B is equivalent to the noise constant REP 4 Package Information 4.1 Package Outline Branded Side Year (y) = 0...9 460 26m Month (m) = 1...9, d y O -October N -November D -December d: Distance chip to upper side of IC: d = 0.56 ±0.1 mm AEA03244 Figure 5 Marking of TLE4946-2K and distance of chip to upper side of IC FinalDatasheet 10 Rev.1.0, 2008-09-18

TLE4946-2K Package Information 1.1±0.1 3±0.1 0.15 MAX. 0.1 3x0.4+-00..105 0.2+0.1 0.1M 3 5 +0.2-0.1 5±0.1 +0.15-0.3 8 4 6 2. 0. 1. 1 2 0.95 0.15+0.1 -0.05 0.95 M 1 0. (0.55) 0˚...8˚ MAX. GPS09473 Figure 6 Package outline 0.8 0.8 n mi 0.9 1.4 3 1. 1.6 9 0. n mi 1.2 4 1. 0.8 1.2 0.8 Reflow Soldering Wave Soldering Figure 7 Footprint SC59 (SOT23 compatible) FinalDatasheet 11 Rev.1.0, 2008-09-18

www.infineon.com Published by Infineon Technologies AG

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I nfineon: TLE4946-2K TLE49462KHTSA1