taP600 series 600 Watt Heat Sinkable Planar Ohmite’s TAP600 delivers 600 Features watts of reliable power to a • Dielectric Strength up to 12KV variety of power conditioning, • Special Design for Low Inductance and power transmission, and power Capacitance Values control applications. These resis- • Contacts allow for easy load connec- tors can be designed for liquid tion with M5 screws (not included) or air cooled heat sink systems. available with M4 as special request. Applications include variable Thread depth 7mm speed drives, power supplies, robotics, motor control, and other • Encapsulated with a special resin filled control devices. epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insula- tion resistance (CTI 600). • Materials meet the requirements of UL94-V0 characteristics Resistance Values 0.25Ω to 100KΩ Typical Resistance Tolerance ±10% Std., 5% available on request. Test Method Results - ∆R Temperature Coefficient ±150ppm/°C (others upon request) Short Time 1000 W/10 Sec. @ 0.4% Overload 70°C Maximum Working Voltage 5,000V DC, higher voltage on request, not exceeding max. power Humidity Steady 56 Days/40°C/ 95°C 0.25% State Power Rating 600W at 70°C heat sink temperature or 85°C bottom case temperature. This value Temp. Cycling -55/+125/5 Cycles 0.20% is only valid by using a thermal conduction Shock 40g/4,000 Times 0.25% to the heat sink Rth -cs<0.025°C/W. Vibrations 2 - 500Hz/10g 0.25% The value can be reached by using thermal transfer compound with a heat conductivity Load Life 1,000 Pn 30 min. ON/30 0.40% of 1w/mk. The flatness of the cooling plate Cycles min. OFF must be better than 0.05mm overall. The Terminal Strength 200N 0.05% roughness of the surface should not exceed of Contacts 6.4µm. Dielectric Strength Voltage 6k Vrms, 50Hz, 1min standard; up to 12k Derating Vrms available Single Shot Voltage Up to 12KV Normwave (1.5/50 µsec) 120 720 Insulation Resistance 10GΩ min. at 500V 100 600 CreepiAnigr DDiissttaannccee 4124mmmm mmiinn.. ower 80 480 Rate p d d p Inductance ≤80nH e o Capacitance/Mass ≤110pF ent rat 60 360 wer, w Capacitance/Parallel ≤40pF Perc 40 240 atts Operation Temperature -55°C to +150°C 20 120 Max. Torque for Contacts 2 Nm 0 0 Max. Torque for Mounting 1.8 Nm 0 25 50 75 100 125 150 175 Bottom of base plate Temperature, °C Derating (thermal resist.) 8.73W/°C (0.115°C/W) (continued) 140 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com

taP600 series 600 Watt Heat Sinkable Planar dimensions (iin./mm) ø0.159–0.169" (4.05–4.3mm) øM5 2.331–2.394" occ. Din (59.2–60.8mm) *Also CL to CL dimension for mounting holes 0.689–0.728" *2.236–2.252" (17.5–18.5mm) (56.8–57.2mm) 1.331–1.346" (33.8–34.2mm) (4.5–0.177 (624.5.22–76–52..85m91m") 5– .5m0.2 m16 )" 1.409–1.425" (35.8–36.2mm) 0.295–0.335" (7.5–8.5mm) 0.177–0.216" (4.5–5.5mm) 1.240–1.279" 1.161–1.201" (31.5–32.5mm) (29.5–30.5mm) * * *Dimensions are taken while part is 0.571–610" mounted to a proper heatsink (14.5–15.5mm) * ordering inFormation RoHS compliant Non-compliant version Standard Values unavailable TA P 6 0 0 K 5 R0 E 100%.1 t0o l. 1.0 15 500 5% tol. TAP600KR25E TAP600K4R0E TAP600K5R0E TAP600J1R0E Style Tolerance Resistance TAP600KR33E TAP600K40RE TAP600K7K5E TAP600J10RE J = 5% 1 Ohm = 1R0 TAP600KR50E TAP600K20RE TAP600K7R5E TAP600J50RE K = 10%, Std. 10 Ohm = 10R TAP600K100E TAP600K200E TAP600K75RE TAP600J100E L = 20% 1000 Ohm = 1K0 TAP600K10KE TAP600K22RE TAP600K750E TAP600J500E TAP600K10RE TAP600K2R0E TAP600K30RE TAP600J1K0E TAP600K1K0E TAP600K3R0E TAP600K500E TAP600K1R0E TAP600K50RE THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be monitored and kept within specified limits to es- tablish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resis- tor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor. The Ohmite CP4 (http://www.ohmite.com/cat/sink_cp4. pdf) is an example of properly designed heat sink. 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 141

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O hmite: TAP600K10RE TAP600K100E TAP600K1K0E TAP600K10KE TAP600KR50E TAP600K1R0E TAP600K5R0E TAP600K50RE TAP600K3R0E TAP600K22RE TAP600K2R0E TAP600KR25E TAP600KR33E TAP600K4R0E TAP600K300E TAP600K30RE TAP600K75RE TAP600K500E TAP600KR20E TAP600K5K0E TAP600J50RE TAP600J10RE TAP600K750E TAP600K40RE TAP600J1K0E TAP600J1R0E TAP600J100E TAP600J500E TAP600K200E TAP600K7K5E TAP600K7R5E TAP600K20RE TAP600J4R7E