General Purpose High Power PCB Relays PPootttteerr && BBrruummfifieelldd T92 Series Two-pole 30A PCB or Panel Mount Relay n 40A, 2 form A (NO) and 2 form C (CO) switching capability n Designed to control compressor loads to 3.5 tons, 110LRA / 25.3FLA n Meets requirements of UL 508 and UL 873 spacings - 8mm through air, 9.5mm over surface n Meets requirements of VDE 8mm spacing, 4kV dielectric coil-to- contact n Meets requirements of UL Class F construction n UL approved for 600VAC switching (1.5HP) n Screw terminal version (consult factory for availability, ratings) n Anti-explosive version available (Meets EN 60079-15) n WG version available (Meets EN 60335-1) Typical applications HVAC, residential / commercial appliances, industrial controls. Approvals Contact ratings 1) (continued) UL E22575 (Recognized and Listed); CSA LR48471; VDE 40019600 VDE Technical data of approved types on request. AgCdO, flange mount relays NO 20A, 400VAC 100x103 Contact Data NC 3A, 400VAC 30x103 Contact arrangement 2 form A (NO), 2 form C (CO) CO 20A NO / 3A NC, 400VAC 30x103 Rated voltage 277VAC AgCdO, PC mount relays Max. switching voltage 600VAC NO 30A, 400VAC 100x103 Rated current 30A NO; 3A NC NC 3A, 400VAC 30x103 Limiting continuous current 40A NO; 3A NC CO 30A NO / 3A NC, 400VAC 30x103 Limiting making current 40A NO; 3A NC Anti-explosion, sealed type Limiting breaking current 40A NO; 3A NC NO 30A 250VAC, 25°C 100x103 Contact material AgSnOInO, AgCdO Anti-explosion, break device Min. recommended contact load 500ma (NO)/ 100ma (NC), 12VAC NO 15A 480VAC 100x103 Frequency of operation, with load 360hr ARI 780-86 Endurance Test (section 6.6): Operate/release time max., including bounce 25/25ms HVAC Definite Purpose Contactor Standard Initial contact resistance < 100 mΩ at 6VDC 1A Normally Open Contacts Single Phase/Two Pole (Both poles together switching a single load) Contact ratings 1) 110 LRA, 25.3 FLA, 200K operations (DC Coil) Type Load Cycles L1 L2 UL508 AgCdO Figure 1 T1 T2 NO 40A, 277VAC, resistive 6x103 NO 30A, 120/277VAC, resistive 100x103 Single Phase Per Pole (Single load per pole) NO 10A, 600VAC, general purpose 100x103 110 LRA, 18 FLA, 200K operations (DC Coil). NO 1HP, 120VAC 100x103 60 LRA, 14 FLA, 200K operations (AC Coil). NO 3HP, 240VAC 1x103 L1 L2 NO 1.5HP, 480 or 600VAC 100x103 NO 110LRA/25.3FLA, 240VAC (DC coil only) 100x103 Figure 2 T1 T2 NO 60LRA/14FLA, 240VAC (AC coil only) 100x103 NO 3A, 240VAC, pilot duty 100x103 NO 20A, 28VDC, resistive 100x103 1) Contact ratings at 25°C (unless otherwise noted) with relay properly vented. NO TV10, 120VAC 100x103 FLA, LRA ratings are compatible with 3.5 ton compressor applications. NC 3A, 277VAC 100x103 NC 2A, 480VAC 100x103 Mechanical endurance 10x106 ops. NC 1A, 600VAC 100x103 AgSnOInO NO 40A, 240VAC, resistive 85°C 50x103 Coil Data NO 30A, 120/277VAC, resistive (DC coil only) 200x103 Coil voltage range 5 to 110VDC; 12 to 240VAC NO 30A, 120/277VAC, resistive (AC coil only) 100x103 Max. coil power 1.7W; 4.0VA NO 20A, 480VAC, resistive 100x103 Max. coil temperature 155°C NO 1.5HP, 120VAC, 2 pole making/breaking (Fig.1) 100x103 Coil insulation system according UL Class F NO 3HP, 240VAC, 3 phase (DC coil only) 100x103 Coil versions, DC coil (D type) NO 3HP, 480VAC, 3 phase (DC coil only) 100x103 Coil Rated Operate Release Coil Rated coil NO 2HP, 600VAC, 3 phase (DC coil only) 100x103 code voltage voltage voltage resistance power Special Ag Alloy X (Cd Free), wash tight VDC VDC VDC Ω±10% W NO 30A, 250VAC, resistive 100x103 5 5 3.75 0.6 14.9 1.7 NO 30A, 400VAC, resistive 100x103 6 6 4.5 0.6 22 1.7 NO 20A, 480VAC, resistive 100x103 9 9 6.75 0.9 48 1.7 1 02-2020, Rev. 0220 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

General Purpose High Power PCB Relays PPootttteerr && BBrruummfifieelldd T92 Series Two-pole 30A PCB or Panel Mount Relay (Continued) Coil data (continued) Coil Data (continued) 12 12 9 1.2 86 1.7 Ambient temperature vs. coil voltage 18 18 13.5 1.8 197 1.7 Assumptions: 22 22 16.5 2.2 294 1.7 1. Thermal resistance = 35°C per Watt (DC only.) 24 24 18 2.4 350 1.7 2. Still air. 36 36 27 3.6 767 1.7 3. Nominal coil resistance. 48 48 36 4.8 1390 1.7 4. Max. mean coil temperature = 155°C (change of resistance method). 110 110 82.5 11 7255 1.7 5. Coil temperature rise due to load = 6.3°C @ 30 amps. 120 120 90 12 8514 1.7 6. Curves are based on 1.7W at 25°C (DC only.) Coil versions, AC coil (A type) (continued) Coil Rated Frequency Operate Release Coil Rated coil Insulation Data code voltage voltage voltage resistance power Initial dielectric strength VAC Hz VAC, 60Hz VAC, 60Hz Ω±10% VA between open contacts 1500Vrms 12 12 60 9.6 1.2 9.1 4 between contact and coil 4000Vrms 24 24 60 19.2 2.4 36.6 4 between adjacent contact 2000Vrms 110 110 60 88 11 793 4 Initial surge withstand voltage 120 110/120 50/60 96 12 950 4 between contact and coil 8kV 208 208 60 166.4 20.8 2841 4 Initial insulation resistance 240 220/240 50/60 192 24 3800 4 between insulated elements 1x109Ω 277 250/277 50/60 221.6 27.7 5485 4 Clearance/creepage Coil versions, AC coil (F type) between contact and coil 8mm clearance/9.5mm creepage Coil Rated Frequency Operate Release Coil Rated coil code voltage voltage voltage resistance power VAC Hz VAC, 60Hz VAC, 60Hz Ω±10% VA Other Data 12 12 50 9.6 1.2 11.2 3.5 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 24 24 50 19.2 2.4 44.4 3.5 refer to the Product Compliance Support Center at 48 48 50 38.4 4.8 179.2 3.5 www.te.com/customersupport/rohssupportcenter 240 240 50 192 24 4355 3.5 Ambient temperature All figures are given for coil without preenergization, at ambient temperature +23°C. For A DC coil -55ºC to 85ºC type, 110V/120V, 50/60Hz. Signify 50Hz Operation at Nominal 110V, 60 Hz Operation at AC coil -55ºC to 65ºC Nominal 120V. Category of environmental protection C) 120 IEC 61810 RTI - dust protected, e Ambient Temp. (°1860000 A CAC C Coiol i3l 00 AA D DCC C Coiol i3l 00 AAmmpp CCoonnttaacctt LLooaadd VSSTWeihhberoo mrigaccihtkkniot a rrneel tssryiiesspstteaais nntaccneec ((efdu e(nfsuctntriuocctnitoaivnl)e a) l) R1 .T6I5IP m-C flmBu-x 1mt h0patgr ox of ooe1rf8 xr,0q 6c1R0ugu1gTi crm IskIIi o s-cen owcsn ,a n1seh0c -tt5i g5h Htz bl 40 a Resistance to soldering heat THT w Allo 20 IEC 60068-2-20 260°C x. Packaging/unit tray/30 pcs., box/120 pcs. a 0 M 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140145 150 Applied Coil Voltage (% of Rated Nominal) Dimensions T92 – Mounting and termination code 1 T92 – Mounting and termination code 2, 3 and 4 2.06 MAX. 1.36 MAX. 2.700 MAX. 1.36 MAX. (52.32) (34.54) (68.58) (34.54) 1.(2310 .M73A)X. .156 1.(0246 .M42A)X. 1.4(3975. 9M7A)X. (3.96) .250 TYP. 1.618 ± .020 (6.35) (41.10 ± .51) .047 TYP. 2.05 MAX. .585 ± .005 (1.19) (52.07) (14.86 ± .13) .(370.895 ± ± . 0.1035) .03(02. 8T1Y)P. 2(5.394.556 ± ± . 0.1035) 1.618 TYP. (41.10 ± .51) .585 ± .005 (14.86 ± .13) .309 ± .005 .630 ± .005 1.000 ± .010 (7.85 ± .13) (16.00 ± .13) (25.40 ± .25) .090 RAD. (2.29) FOR #8 SCREW .630 TYP. (16.00) 2 02-2020, Rev. 0220 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

General Purpose High Power PCB Relays PPootttteerr && BBrruummfifieelldd T92 Series Two-pole 30A PCB or Panel Mount Relay (Continued) Dimensions Terminal assignment Bottom view on pins T92 – Mounting and termination code 5 2 form A 2 form C 2.700 MAX. (68.58) 0 0 1.36 MAX. (34.54) 2 4 2 4 3 .090 (2.29) RAD. FOR 6 8 6 8 7 #8 SCREW 1 1 2.345 ± .005 (59.56 ± .13) 2.135 MAX. 1.431 MAX. (54.23) (36.34) PCB layout Bottom view on pins T92 - Mounting and termination code 1 2.010 MAX. (51.05) 1.618 (41.10) .585 .9(1233 .M19A)X. .309 (14.86) .185 (7.85) (4.70) .365 (9.27) .630 1.000 (16.00) (25.40) .203 TYP. (5.16) .052 TYP. .072 TYP. (1.32) .162 (1.83) (4.12) An alternate PC board layout utilizes .076 ± .003 (1.93 ± .076) diameter holes on the same center-to-center spacing shown above. Use of the rectangular holes is recommended for improved solderability. Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. Product code structure Typical product code T92 S 11 D 2 2 -24 -99 Type T92 Printed circuit board / panel mount power relay T92 Enclosure P Dust protected plastic case S Wash-tight, tape sealed, plastic case (Mounting and termination code 1) Wash-tight, glue sealed, plastic case (Mounting and termination code 1, 2 for anti-explosion version) Top sealed, not wash-tight, not tape sealed on bottom (Mounting and termination codes 2, 3 & 4) Contact arrangement 7 2 form A (2 NO) 11 2 form C (2 CO) Coil Input A AC voltage, 60Hz or 50/60 Hz (consult coil versions table) D DC voltage F AC voltage, 50Hz Mounting and termination 1 Printed circuit board mount; printed circuit board terminals. 2 Panel mount via flanged cover; .250” (6.35mm) x .032” (.81mm) QC terminal 3 Panel mount via flanged cover; .187” (4.75mm) x .032” (.81mm) QC terminals for coil and .250” (6.35mm) for contacts 4 Panel mount via flanged cover, .187” (4.75mm) x .020” (.51mm) QC terminals for coil and .250” (6.35mm) for contacts. 5 Panel mount via flanged cover, M4 screws w/ captive pressure plates. Requires Enclosure P and Contact arrangement 7. Contact material 2 AgCdO 4 AgSnOInO X Special Ag Alloy X (Cd Free) Coil voltage Coil code: please refer to coil versions table Customer code -99 Anti-explosion -00 WG version 3 02-2020, Rev. 0220 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

General Purpose High Power PCB Relays PPootttteerr && BBrruummfifieelldd T92 Series Two-pole 30A PCB or Panel Mount Relay (Continued) Product Code Enclosure Contacts Coil Mounting Contact Material Coil Part Number  T92P7A22-24 Plastic dust cover 2 form A, 2 NO AC Panel mount + quick connect AgCdO 24 VAC 6-1393211-0   T92P7A22-120 120 VAC 5-1393211-7   T92P7A22-240 240 VAC 6-1393211-2   T92P7A22-277 277 VAC 6-1393211-3   T92P7A24-240 AgSnOInO 240 VAC 3-1423008-3   T92P7A52-120 Panel mount + screw terminals AgCdO 120 VAC 1423008-8   T92P7A52-240 240 VAC 1-1423008-2   T92P7D12-12 DC PCB terminals 12 VDC 6-1393211-5   T92P7D12-24 24 VDC 6-1393211-6   T92P7D22-12 Panel mount + quick connect 12VDC 6-1393211-9   T92P7D22-24 24 VDC 7-1393211-1   T92P7D22-48 48 VDC 7-1393211-2   T92P7D24-12 AgSnOInO 12VDC 2-1423008-2   T92P7D24-24 24 VDC 1423008-9   T92P7D42-24 AgCdO 7-1393211-5   T92P7D52-12 Panel mount + screw terminals 12 VDC 1-1423008-0   T92P7D52-24 24 VDC 1423967-1   T92P11A12-120 2 form C, 2 CO AC PCB terminals 120 VAC 3-1393211-8   T92P11A22-12 Panel mount + quick connect 12 VAC 3-1393211-9   T92P11A22-24 24 VAC 4-1393211-3   T92P11A22-120 120 VAC 4-1393211-0   T92P11A22-240 240 VAC 4-1393211-4   T92P11A22-277 277 VAC 4-1393211-6   T92P11A24-240 AgSnOInO 240 VAC 3-1423008-7   T92P11A42-120 AgCdO 120VAC 4-1393211-8   T92P11D12-12 DC PCB terminals 12 VDC 5-1393211-0   T92P11D22-12 Panel mount + quick connect 5-1393211-3   T92P11D22-24 24 VDC 5-1393211-4   T92P11D24-12 AgSnOInO 12 VDC 3-1423008-5   T92P11D24-24 24 VDC 3-1423008-6   T92S7A12-24 Wash tight 2 form A, 2 NO AC PCB terminals AgCdO 24 VAC 9-1393211-8   T92S7A12-120 120 VAC 9-1393211-7   T92S7A12-240 240 VAC 9-1393211-9   T92S7A22-24 Top sealed Panel mount + quick connect 24 VAC 1393212-4   T92S7A22-120 120 VAC 1393212-2   T92S7A22-240 240 VAC 1393212-5   T92S7D12-12 Wash tight DC PCB terminals 12 VDC 1393212-8   T92S7D12-24 24 VDC 1-1393212-0   T92S7D12-48 48 VDC 1-1393212-1   T92S7D12-110 110 VDC 1393212-7   T92S7D14-24 AgSnOInO 24 VDC 1-1423008-8   T92S7D22-12 Top sealed Panel mount + quick connect AgCdO 12 VDC 1-1393212-4   T92S7D22-18 18 VDC 1-1393212-5   T92S7D22-24 24 VDC 1-1393212-7   T92S7D22-110 110 VDC 1-1393212-3   T92S11A12-24 Wash tight 2 form C, 2 CO AC PCB terminals 24 VAC 8-1393211-1   T92S11A12-120 120 VAC 8-1393211-0   T92S11A12-240 240 VAC 8-1393211-2   T92S11A22-12 Top sealed Panel mount + quick connect 12 VAC 8-1393211-3   T92S11A22-24 24 VAC 8-1393211-6   T92S11A22-120 120 VAC 8-1393211-4   T92S11A22-240 240 VAC 8-1393211-7   T92S11D12-12 Wash tight DC PCB terminals 12 VDC 8-1393211-9   T92S11D12-24 24 VDC 9-1393211-0   T92S11D12-48 48 VDC 9-1393211-1   T92S11D12-110 110 VDC 8-1393211-8   T92S11D22-12 Top sealed Panel mount + quick connect 12 VDC 9-1393211-3   T92S11D22-24 24 VDC 9-1393211-4  T92P7D12-12-99 Plastic dust cover 2 form A, 2 NO DC PCB terminals AgCdO 12VDC 2-2071223-3 T92S7D1X-12-99 Wash tight Special Ag Alloy 12VDC 6-1423008-1 T92S7D2X-12-99 Panel mount + quick connect X (Cd Free) 12VDC 6-1423008-2 T92S7A22-240-00 Top Sealed(WG) AC AgCdO 240VAC 2-2071223-4 T92S7D12-12-00 Wash tight (WG) DC PCB terminals 12VDC 1-2071223-7 Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request. 4 02-2020, Rev. 0220 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions