Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Overview The KEMET T498 Series is a high temperature product that offers optimum performance characteristics in applications with operating temperatures up to 150°C. Advanced materials and testing allow this series to perform with a reliability level of 0.5%/1,000 hours at rated voltage and temperature. The T498 Series is available in five standard EIA case sizes with RoHS compliant terminations as standard. Benefits Applications • Meets or exceeds EIA Standard 535BAAC Typical applications include decoupling and filtering in industrial • Taped and reeled per EIA 481–1 and automotive end applications such as DC/DC converters, • Symmetrical, compliant terminations portable electronics, telecommunications, and control units • Optional gold-plated terminations operating at temperatures up to 150°C. • Laser-marked case • 100% surge current testing • Complies with AEC–Q200 • Capacitance values of 0.47 μF to 220 μF • Tolerances of ±10% and ±20% • Voltage rating of 6 – 50 VDC • 100% steady-state accelerated aging • Temperature/voltage derating is 2/3 at 150°C • RoHS Compliant and lead-free terminations standard • Operating temperature range of -55˚C to +150˚C Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Ordering Information T 498 X 227 M 010 A T E800 Capacitor Capacitance Capacitance Failure Rate/ Packaging Series Case Size Voltage Lead Material ESR Class Code (pF) Tolerance Design (C-Spec) T = High A, B, C, D, X First two digits K = ±10% 006 = 6.3 V A = N/A T = 100% Last three Blank = 7" Reel Tantalum Temperature represent M = ±20% 010 = 10 V Z = N/A Matte Tin (Sn) digits specify 7280 = 13" Reel 150ºC significant 016 = 16 V Plated ESR in mΩ. figures. Third 020 = 20 V G = Gold (800 = 800 digit specifies 025 = 25 V Plated mΩ) number of 035 = 35 V zeros. 050 = 50 V Performance Characteristics Item Performance Characteristics Operating Temperature -55°C to 150°C Rated Capacitance Range 0.33 – 220 μF @ 120 Hz/25°C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 6 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 22

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Qualification Test Condition Characteristics ΔC/C Within ±10% of initial value DF Within initial limits Endurance 150°C @ 2/3 rated voltage, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits ΔC/C Within ±10% of initial value DF Within initial limits Storage Life 150°C @ 0 volts, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits ΔC/C Within ±5% of initial value MIL–STD–202, Method 107, Condition B, mounted, -55°C to DF Within initial limits Thermal Shock 150°C, 1,000 cycles DCL Within 1.25 x initial limit ESR Within initial limits +25°C -55°C +85°C +150°C Extreme temperature exposure at a ΔC/C IL* ±10% ±10% ±20% Temperature Stability succession of continuous steps at +25ºC, DF IL IL 1.5 x IL 1.5 x IL -55ºC, +25ºC, +85ºC, +150ºC, +25ºC DCL IL n/a 10 x IL 12 x IL ΔC/C Within ±5% of initial value 25°C and 85°C, 1.32 x rated voltage 1,000 cycles DF Within initial limits Surge Voltage (150°C, 1.2 x rated voltage) DCL Within initial limits ESR Within initial limits ΔC/C Within ±10% of initial value MIL–STD–202, Method 213, Condition I, 100 G peak Mechanical Shock/Vibration MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, DF Within initial limits 20 G peak DCL Within initial limits *IL = Initial Limit © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 33

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Electrical Characteristics ESR vs. Frequency Capacitance vs. Frequency 1000 1000 T498B106M010ATE1K8 T498B106M010ATE1K8_IMP T498D476M010ATE600 T498D476M010ATE600_IMP T498X227M010ATE500 s)100 T498B106M010ATE1K8_ESR 100 SR (Ohm TTT444999888XDX224227776MMM000111000AAATTTEEE556000000___IEEMSSPRR nce (µF) dance, E 10 Capacita 10 e p m I 1 1 0.1 0.1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency ( Hz) Frequency ( Hz) Dimensions – Millimeters (Inches) Metric will govern Termination cutout at KEMET’s option, either end Case Size Component F* ±0.1 S* ±0.3 B* ±0.15 KEMET EIA L* W* H* X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) ±(.004) ±(.012) (Ref) ±.006 3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 0.10 ± 0.10 A 3216–18 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051) (0.126 ±0.008)(0.063 ±0.008)(0.063 ±0.008) (.004 ± .004) 3.5 ±02 2.8 ±0.2 1.9 ±0.2 0.10 ± 0.10 B 3528–21 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087) (0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008) (.004 ± .004) 6.0 ±0.3 3.2 ±0.3 2.5 ±0.3 0.10 ± 0.10 C 6032–28 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) (0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012) (.004 ± .004) 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 0.10 ± 0.10 D 7343–31 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) (0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012) (.004 ± .004) 7.3 ±0.3 4.3 ±0.3 4.0 ±0.3 0.10 ± 0.10 X 7343–43 2.4 (.094) 1.3 (.051) 0.5 (.020) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) (0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012) (.004 ± .004) Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL–PRF–55365/8 specified dimensions © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 44 15

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Table 1 – Ratings & Part Number Reference Rated Rated Case Code/ KEMET Part DC Maximum Allowable Moisture DF ESR Voltage Cap Case Size Number Leakage Ripple Current Sensitivity (See below for µA +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz Reflow Temp VDC µF KEMET/EIA part options) Max/5 Min 120 Hz Max 100 kHz Max 25ºC 85ºC 125ºC ≤ 260ºC 6.3 10 B/3528-21 T498B106(1)006A(2)E2K1 0.6 6.0 2100 201 181 80 1 6.3 15 B/3528-21 T498B156(1)006A(2)E1K8 0.9 6.0 1800 217 195 87 1 6.3 22 C/6032-28 T498C226(1)006A(2)E1K3 1.4 6.0 1300 291 262 116 1 6.3 33 B/3528-21 T498B336(1)006A(2)E1K7 2.1 6.0 1700 224 202 90 1 6.3 47 C/6032-28 T498C476(1)006A(2)E800 3.0 6.0 800 371 334 148 1 6.3 100 D/7343-31 T498D107(1)006A(2)E600 6.3 8.0 600 500 450 200 1 10 2.2 A/3216-18 T498A225(1)010A(2)E4K6 0.5 6.0 4600 128 115 51 1 10 3.3 A/3216-18 T498A335(1)010A(2)E3K6 0.5 6.0 3600 144 130 58 1 10 4.7 A/3216-18 T498A475(1)010A(2)E2K9 0.5 6.0 2900 161 145 64 1 10 4.7 B/3528-21 T498B475(1)010A(2)E2K7 0.5 6.0 2700 177 159 71 1 10 10 B/3528-21 T498B106(1)010A(2)E1K8 1.0 6.0 1800 217 195 87 1 10 15 B/3528-21 T498B156(1)010A(2)E1K5 1.5 6.0 1500 238 214 95 1 10 15 C/6032-28 T498C156(1)010A(2)E1K8 1.5 6.0 1800 247 222 99 1 10 22 B/3528-21 T498B226(1)010A(2)E1K5 2.2 6.0 1500 238 214 95 1 10 22 C/6032-28 T498C226(1)010A(2)E1K1 2.2 6.0 1100 316 284 126 1 10 47 D/7343-31 T498D476(1)010A(2)E600 4.7 6.0 600 500 450 200 1 10 100 D/7343-31 T498D107(1)010A(2)E600 10.0 8.0 600 500 450 200 1 10 220 X/7343-43 T498X227(1)010A(2)E500 22.0 8.0 500 574 517 230 1 16 1 A/3216-18 T498A105(1)016A(2)E6K5 0.5 4.0 6500 107 96 43 1 16 3.3 A/3216-18 T498A335(1)016A(2)E3K4 0.5 6.0 3400 149 134 60 1 16 4.7 B/3528-21 T498B475(1)016A(2)E2K1 0.8 6.0 2100 201 181 80 1 16 6.8 A/3216-18 T498A685(1)016A(2)E2K6 1.1 6.0 2600 170 153 68 1 16 6.8 B/3528-21 T498B685(1)016A(2)E1K8 1.1 6.0 1800 217 195 87 1 16 10 B/3528-21 T498B106(1)016A(2)E2K8 1.6 6.0 2800 174 157 70 1 16 10 C/6032-28 T498C106(1)016A(2)E1K4 1.6 6.0 1400 280 252 112 1 16 15 C/6032-28 T498C156(1)016A(2)E1K1 2.4 6.0 1100 316 284 126 1 16 22 C/6032-28 T498C226(1)016A(2)E1K0 3.5 6.0 1000 332 299 133 1 16 33 D/7343-31 T498D336(1)016A(2)E600 5.3 6.0 600 500 450 200 1 16 47 D/7343-31 T498D476(1)016A(2)E600 7.5 6.0 600 500 450 200 1 16 68 D/7343-31 T498D686(1)016A(2)E600 10.9 6.0 600 500 450 200 1 16 100 X/7343-43 T498X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1 20 1 A/3216-18 T498A105(1)020A(2)E5K9 0.5 0.5 5900 113 102 45 1 20 10 C/6032-28 T498C106(1)020A(2)E1K1 2.0 2.0 1100 316 284 126 1 25 0.47 A/3216-18 T498A474(1)025A(2)E8K5 0.5 4.0 8500 94 85 38 1 25 2.2 B/3528-21 T498B225(1)025A(2)E3K0 0.6 6.0 3000 168 151 67 1 25 10 C/6032-28 T498C106(1)025A(2)E1K1 2.5 6.0 1100 316 284 126 1 25 10 D/7343-31 T498D106(1)025A(2)E1K0 2.5 6.0 1000 387 348 155 1 25 15 D/7343-31 T498D156(1)025A(2)E700 3.8 6.0 700 463 417 185 1 25 22 D/7343-31 T498D226(1)025A(2)E600 5.5 6.0 600 500 450 200 1 25 33 D/7343-31 T498D336(1)025A(2)E600 8.3 6.0 600 500 450 200 1 35 0.33 A/3216-18 T498A334(1)035A(2)E11K 0.5 4.0 11000 83 75 33 1 35 1 A/3216-18 T498A105(1)035A(2)E10K 0.5 4.0 10000 87 78 35 1 35 1.5 C/6032-28 T498C155(1)035A(2)E3K3 0.5 6.0 3300 183 165 73 1 35 3.3 C/6032-28 T498C335(1)035A(2)E1K7 1.2 6.0 1700 254 229 102 1 35 6.8 D/7343-31 T498D685(1)035A(2)E900 2.4 6.0 900 408 367 163 1 (See below for µA +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz Reflow Temp VDC µF KEMET/EIA part options) Max/5 Min 120 Hz Max 100 kHz Max 25ºC 85ºC 125ºC ≤ 260ºC Rated Rated Case Code/ KEMET Part DC Maximum Allowable Moisture DF ESR Voltage Cap Case Size Number Leakage Ripple Current Sensitivity (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 55

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Table 1 – Ratings & Part Number Reference cont'd Rated Rated Case Code/ KEMET Part DC Maximum Allowable Moisture DF ESR Voltage Cap Case Size Number Leakage Ripple Current Sensitivity (See below for µA +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz Reflow Temp VDC µF KEMET/EIA part options) Max/5 Min 120 Hz Max 100 kHz Max 25ºC 85ºC 125ºC ≤ 260ºC 35 10 D/7343-31 T498D106(1)035A(20E700 3.5 6.0 700 463 417 185 1 35 22 X/7343-43 T498X226(1)035A(2)E500 7.7 6.0 500 574 517 230 1 35 33 X/7343-43 T498X336(1)035A(2)E500 11.6 6.0 500 574 517 230 1 50 3.3 D/7343-31 T498D335(1)050A(2)E1K1 1.7 6.0 1100 369 332 148 1 50 10 D/7343-31 T498D106(1)050A(2)E1K0 5.0 6.0 1000 387 348 155 1 (See below for µA +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz Reflow Temp VDC µF KEMET/EIA part options) Max/5 Min 120 Hz Max 100 kHz Max 25ºC 85ºC 125ºC ≤ 260ºC Rated Rated Case Code/ KEMET Part DC Maximum Allowable Moisture DF ESR Voltage Cap Case Size Number Leakage Ripple Current Sensitivity (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 66

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Recommended Voltage Derating Guidelines 1.2 Recommended Rated Working Voltage Application Voltage (for 1 Voltage maximum reliability) e g0.8 a 85°C 150°C 85°C 150°C olt V 6.3 6.3 4.22 3.15 2.08 king 0.6 %Te Cmhpaenragteu rine Working DC Voltage with 67% 10 10 6.70 5 3.30 or W 16 16 10.72 8 5.28 % 0.4 Recommended Maximum Application Voltage (As % of Rated Voltage) 20 20 13.40 10 6.60 33% 0.2 25 25 16.75 12.5 8.25 35 35 23.45 17.5 11.55 0 -55 25 85 125 150 50 50 33.50 25 16.50 Temperature (°C) Ripple Current/Ripple Voltage Maximum Power Temperature Compensation Multipliers KEMET Series EIA Dissipation (P max) for Maximum Power Dissipation and Case Code Case Code mWatts @ 25°C ≤ 25°C 85°C 125°C 150°C* 175°C** w/+20°C Rise 1.00 0.90 0.40 0.30 0.20 A 3216–18 75 T= Environmental Temperature B 3528–21 85 *T498 Only C 6032–28 110 **T499 Only D 7343–31 150 X 7343–43 165 Using the P max of the device, the maximum allowable rms ripple E 7360–38 200 current or voltage may be determined. T428P 7360–38 325 S 3216–12 60 I(max) = √P max/R T 3528–12 70 E(max) = √P max*R U 6032–15 90 I = rms ripple current (amperes) V 7343–20 125 E = rms ripple voltage (volts) T510X 7343–43 270 P max = maximum power dissipation(watts) T510E 7360–38 285 R = ESR at specified frequency (ohms) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 77

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 B 3528-21 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 C 6032-28 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 X¹ 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351). ¹ Height of these chips may create problems in wave soldering. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 88

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Soldering Process KEMET’s families of surface mount capacitors are compatible Profile Feature SnPb Assembly Pb-Free Assembly with wave (single or dual), convection, IR, or vapor phase reflow Preheat/Soak techniques. Preheating of these components is recommended Temperature Minimum (T ) 100°C 150°C Smin to avoid extreme thermal stress. KEMET's recommended profile Temperature Maximum (T ) 150°C 200°C Smax conditions for convection and IR reflow reflect the profile conditions Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds s smin smax of the IPC/J–STD–020D standard for moisture sensitivity testing. Ramp-up Rate (T to T) 3°C/seconds maximum 3°C/seconds maximum L P The devices can safely withstand a maximum of three reflow Liquidous Temperature (T) 183°C 217°C L passes at these conditions. Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Please note that although the X/7343–43 case size can withstand Time within 5°C of Maximum wave soldering, the tall profile (4.3 mm maximum) dictates care in Peak Temperature (t) 20 seconds maximum 30 seconds maximum P wave process development. Ramp-down Rate (T to T) 6°C/seconds maximum 6°C/seconds maximum P L Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Hand soldering should be performed with care due to the difficulty Note: All temperatures refer to the center of the package, measured on the in process control. If performed, care should be taken to avoid package body surface that is facing up during assembly reflow. contact of the soldering iron to the molded case. The iron should *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the T iron should be removed immediately. “Wiping” the edges of a chip P t Maximum Ramp Up Rate = 3ºC/seconds P and heating the top surface is not recommended. Maximum Ramp Down Rate = 6ºC/se conds T L t L e During typical reflow operations, a slight darkening of the gold- ur T at smax colored epoxy may be observed. This slight darkening is normal er p m T and not harmful to the product. Marking permanency is not Te smin tS affected by this change. 25 25ºC to Peak Time Construction MNO2 / Ta2O5/Ta Silver Adhesi ve Silver Pa int Was her Leadframe (-Catho de) Leadframe (+Anode) Carbon Tantalum Wire Weld © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 99

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Capacitor Marking C, D, X Case Sizes KEMET High KEMET High Temperature HT Polarity Temperature Polarity 150⁰C Indicator (+) 150 C Indicator (+) ⁰ K KEMET ID 227 Picofarad Code 1 2 RVoaltteadge 10 K KEMET ID RVoaltteadge 0 2 Picofarad Code V 7 230 Date Code* Date C6 49 Internal Code Code* * 230 = 30thweek of 2012 Date Code * Date Code* 1st digit = Last number of Year 9 = 2009 Year Month 0 = 2010 X = 2009 1 = Jan 7 = Jul 1 = 2011 A = 2010 2 = Feb 8 = Aug 2 = 2012 3 = 2013 B = 2011 3 = Mar 9 = Spt 4 = 2014 C = 2012 4 = Apr O = Oct 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to D = 2013 5 = May N = Nov 52 = 52nd week of the Year E = 2014 6 = Jun D = Dec Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1100

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Tape & Reel Packaging Information KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") Top Tape Thickness or 0.10 mm (0.004") 330 mm (13.0") Maximum Thickness Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA I 3216-10 8 3,000 12,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 M 3528-15 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 5,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1111

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P2 T2 ØDo Po [10 pitches cumulative E1 tolerance on tape ± 0.2 mm] Ao F Ko W B1 Bo E2 S1 P1 T1 Center Lines of Cavity ØD1 EFomrb coasvsitmy esnizte, Cover Tape see Note 1 Table 4 B1 is for tape feeder reference only, including draft concentric about Bo. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum Tape Size D 1 E P P 1 T Maximum T Maximum 0 Note 1 1 0 2 Note 2 Note 3 1 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/-0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 12 mm (0.059 +0.004/-0.0) 1.5 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 30 (0.024) (0.024) (0.004) (0.059) (1.181) 16 mm Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A,B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.157 ±0.004) (0.098) (0.327) Single (4 mm) & 8.2 10.25 5.5 ±0.05 8.0 ±0.10 4.6 12.3 12 mm Note 5 Double (8 mm) (0.323) (0.404) (0.217 ±0.002) (0.315 ±0.004) (0.181) (0.484) 12.1 14.25 5.5 ±0.05 8.0 ±0.10 4.6 16.3 16 mm Triple (12 mm) (0.476) (0.561) (0.217 ±0.002) (0.315 ±0.004) (0.181) (0.642) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1122

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8,12 20 Bo Tape Maximum 16 – 200 10 Width (mm) Rotation ( °) S 8,12 20 Typical Component Centerline 16 – 56 10 72 – 200 5 Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape 16 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 1.0 mm maximum 0.5 mm maximum 1.0 mm maximum Bending R R Radius © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1133

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Figure 5 – Reel Dimensions Full Radius, W3 (Includes Access Hole at See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W2 (Measured at hub) A D (See Note) N C (Arbor hole W1 (Measured at hub) diameter) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/-0.2 20.2 12 mm or (0.059) (0.521 +0.02/-0.008) (0.795) 330 ±0.20 16 mm (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/-0.0 14.4 8 mm (0.331 +0.059/-0.0) (0.567) 50 12.4 +2.0/-0.0 18.4 Shall accommodate tape width 12 mm (1.969) (0.488 +0.078/-0.0) (0.724) without interference 16.4 +2.0/-0.0 22.4 16 mm (0.646 +0.078/-0.0) (0.882) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1144

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm Minimum Leader Trailer Components 400 mm Minimum 160 mm Minimum Top Cover Tape Figure 7 – Maximum Camber Elongated sprocket holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1155

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 KEMET Corporation Europe Asia World Headquarters Southern Europe Northeast Asia 2835 KEMET Way Paris, France Hong Kong Simpsonville, SC 29681 Tel: 33-1-4646-1006 Tel: 852-2305-1168 Mailing Address: Sasso Marconi, Italy Shenzhen, China P.O. Box 5928 Tel: 39-051-939111 Tel: 86-755-2518-1306 Greenville, SC 29606 Beijing, China www.kemet.com Central Europe Tel: 86-10-5829-1711 Tel: 864-963-6300 Landsberg, Germany Fax: 864-963-6521 Tel: 49-8191-3350800 Shanghai, China Tel: 86-21-6447-0707 Corporate Offi ces Kamen, Germany Fort Lauderdale, FL Tel: 49-2307-438110 Taipei, Taiwan Tel: 954-766-2800 Tel: 886-2-27528585 Northern Europe North America Bishop’s Stortford, United Kingdom Southeast Asia Tel: 44-1279-460122 Singapore Southeast Tel: 65-6586-1900 Lake Mary, FL Espoo, Finland Tel: 407-855-8886 Tel: 358-9-5406-5000 Penang, Malaysia Tel: 60-4-6430200 Northeast Wilmington, MA Bangalore, India Tel: 978-658-1663 Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1166

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 Other KEMET Resources Tools Resource Location Confi gure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products http://www.kemet.com/products Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers RoHS Statement http://www.kemet.com/rohs Quality Documents http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request http://www.kemet.com/sample Engineering Kit Request http://www.kemet.com/kits Contact Resource Location Website www.kemet.com Contact Us http://www.kemet.com/contact Investor Relations http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifi cally disclaim – any warranty concerning suitability for a specifi c customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1177

Tantalum Surface Mount Capacitors – High Temperature T498 150°C Rated MnO Series 2 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012_T498 • 3/15/2013 1188