Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Overview The KEMET UltraDip II offers quality instrument and the leading manufacturer of solid tantalum capacitors. The entertainment system designs that are widely recognized plastic case provides a tough barrier coating and maintains and advantages inherent to solid tantalum capacitors at precision of lead wire spacing within ±0.015 inch. The gold competitive prices. These capacitors are miniature, dipped, color epoxy utilized permits laser marking with outstanding solid tantalum capacitors that provide the designer with permanency and legibility. All case sizes are printed with the advantages of compactness, low leakage and low capacitance, voltage, polarity and vendor identification. Solid DF performance characteristics for filtering, bypassing, tantalum devices exhibit no degradation failure mode during coupling, blocking and RC timing circuits. This series shelf storage and show a constantly decreasing failure features a capacitance range from 0.1 to 680 μF at voltages rate (i.e., absence of wearout mechanism) during life tests. from 3 to 50 VDC. Self-insulating cases are resistant to shock and vibration. T35X also exhibits low DC leakage, ESR and impedance, and UltraDip II capacitors utilize the same sophisticated maintains excellent temperature stability. materials and processes that have positioned KEMET as Benefits Applications • Taped and reeled per EIA Specification RS-468 Typical applications include filtering, bypassing, coupling, • Laser-marked case blocking and RC timing circuits or other applications that • Capacitance values of 0.1 to 680 μF can benefit from compactness. • Tolerances of ± 5% (special order), ±10% and ±20% • Voltage rating of 3 – 50 VDC • Case sizes: A, B, C, D, E, F, G, H, J, K, L, and M One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Ordering Information T 35X A 105 M 035 A S Capacitor Case Capacitance Rated Voltage Failure Series Capacitance Code (pF) Termination Finish Packaging Class Size Tolerance (VDC) Rate T = 350 A, B, First two digits M = ±20% 003 = 3 Not S = Standard Blank = Bulk Tantalum 351 C, D, represent significant K = ±10% 006 = 6 Applicable T =100% Sn (tin) 7301 = Tape & Reel 352 E, F, figures. Third digit J = ±5% 010 = 10 7303 = Tape & Reel 353 G, H, specifies number of (Available on 016 = 16 7305 = Ammo 354 J, K, zeros to follow. special order) 020 = 20 7317 = Ammo 355 L, M 025 = 25 356 035 = 35 050 = 50 Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 125°C Rated Capacitance Range 0.1 – 680 μF at 120 Hz/25°C Capacitance Tolerance M tolerance ±20%, K tolerance ±10% Rated Voltage Range 3 – 50 V DF (120 Hz at 25°C) Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of Leakage Current rated voltage applied at 125°C) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Dimensions – Millimeters (Inches) T350 T351 T352 T353 T354 T355 T356 0.250 ±0.025 (6.35 ±0.64) D D D D D D D Maximum Maximum Maximum Maximum Maximum Maximum Maximum H H H H H H H Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.02 0.50 ±0.05 0.187 ±0.032 (0.5) 0.187 ±0.032 0.187 ±0.032 0.187 ±0.032 0.187 ±0.032 0.187 ±0.032 0.02 **0.02 (4.75 ±0.81) (4.75 ±0.81) (4.75 ±0.81) (4.75 ±0.81) (4.75 ±0.81) (4.75 ±0.81) (0.5) (0.5) 0.20 0.20 0.25 0.20 0.10 (5.08) (5.08) (6.35) 0.125 (5.08) Lead Spacing (2.54) (3.18) See Note 2 *Lead Tolerance = ±0.015 (±0.38 mm) ** All Lead Diameters = 0.02 ±0.002 (0.5 ±0.05 mm) Case All T350 T351 T352 T353 T354 T355 T356 Size D H* H* H* H* H* H* H* Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Diamenter Height Height Height Height Height Height Height A 0.175 (4.5) 0.280 (7.1) 0.380 (9.6) 0.400 (10.2) 0.400 (10.2) 0.340 (8.6) 0.340 (8.6) 0.340 (8.6) B 0.175 (4.5) 0.300 (7/6) 0.390 (9.9) 0.410 (10.4) 0.410 (10.4) 0.350 (8.9) 0.350 (8.9) 0.350 (8.9) C 0.196 (5.0) 0.330 (8.4) 0.420 (10.7) 0.440 (11.2) 0.440 (11.2) 0.380 (9.6) 0.380 (9.6) 0.380 (9.6) D 0.196 (5.0) 0.340 (8.6) 0.430 (10.7) 0.450 (11.4) 0.450 (11.4) 0.390 (9.9) 0.390 (9.9) 0.390 (9.9) E 0.216 (5.5) 0.350 (8.9) 0.440 (11.2) 0.460 (11.7) 0.460 (11.7 0.400 (10.2) 0.400 (10.2) 0.400 (10.2) F 0.236 (6.0) 0.390 (9.9) 0.480 (12.2) 0.500 (12.7) 0.500 (12.7) 0.440 (11.2) 0.440 (11.2) 0.440 (11.2) G 0.250 (6.3) 0.400 (10.2) 0.490 (12.4) 0.510 (13.0) 0.510 (13.0) 0.450 (11.4) 0.450 (11.4) 0.450 (11.4) H 0.300 (7.6) 0.400 (10.2) 0.500 (12.7) 0.520 (13.2) 0.520 (13.2) 0.470 (11.9) 0.470 (11.9) 0.470 (11.9) J** 0.330 (8.4) 0.500 (12.7) *** *** 0.580 (14.7) 0.550 (14.0) *** 0.550 (14.0) K** 0.350 (8.9) 0.530 (13.5) *** *** 0.630 (16.0) 0.610 (15.5) *** 0.610 (15.5) L** 0.350 (8.9) 0.630 (16.0) *** *** 0.730 (18.5) 0.710 (18.1) *** 0.710 (18.1) M** 0.400 (10.2) 0.670 (17.0) *** *** 0.760 (19.3) 0.740 (18.8) *** 0.740 (18.8) *All "H" Dimensions are from Capacitor seating plane to top of Capacitor. **On T350, case sizes A-H are supplied with 0.100" (2.54) lead spacing and case sizes J-M are supplied with 0.200" (5.08) lead spacing. ***These case sizes are not available for T351, T352 and T355 capacitors. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Table 1 - Ratings and Part Number Reference Case Code KEMET DC Rated Voltage Rated Capacitance Case DF % at 25°C Part Number Leakage Size µA at 25°C 120 Hz (V) 85°C µF Maximum/5 Minutes Maximum 3 4.7 A T35(1)A475(3)003A(4) 0.5 5 3 5.6 A T35(1)A565(3)003A(4) 0.5 5 3 6.8 A T35(1)A685(3)003A(4) 0.5 5 3 8.2 A T35(1)A825(3)003A(4) 0.5 6 3 10.0 A T35(1)A106(3)003A(4) 0.5 6 3 12.0 B T35(1)B126(3)003A(4) 0.5 6 3 15.0 B T35(1)B156(3)003A(4) 0.5 6 3 18.0 C T35(1)C186(3)003A(4) 0.5 6 3 22.0 C T35(1)C226(3)003A(4) 0.5 6 3 27.0 D T35(1)D276(3)003A(4) 0.6 6 3 33.0 D T35(1)C336(3)003A(4) 0.8 6 3 39.0 E T35(1)E396(3)003A(4) 0.9 6 3 47.0 E T35(1)E476(3)003A(4) 1.1 6 3 56.0 F T35(1)F566(3)003A(4) 1.3 6 3 68.0 F T35(1)F686(3)003A(4) 1.6 6 3 82.0 G T35(1)G826(3)003A(4) 2.0 8 3 100.0 G T35(1)G107(3)003A(4) 2.4 8 3 120.0 H T35(1)H127(3)003A(4) 2.9 8 3 150.0 H T35(1)H157(3)003A(4) 3.6 8 3 180.0 J T35(2)J187(3)003A(4) 4.3 8 3 220.0 J T35(2)J227(3)003A(4) 5.3 8 3 270.0 K T35(2)K277(3)003A(4) 6.5 8 3 330.0 K T35(2)K337(3)003A(4) 7.9 8 3 390.0 L T35(2)L397(3)003A(4) 9.4 9 3 470.0 L T35(2)L477(3)003A(4) 10.0 9 3 560.0 M T35(2)M567(3)003A(4) 10.0 9 3 680.0 M T35(2)M687(3)003A(4) 10.0 9 6 3.3 A T35(1)A335(3)006A(4) 0.5 5 6 3.9 A T35(1)A395(3)006A(4) 0.5 5 6 4.7 A T35(1)A475(3)006A(4) 0.5 5 6 5.6 A T35(1)A565(3)006A(4) 0.5 5 6 6.8 A T35(1)A685(3)006A(4) 0.5 5 6 8.2 B T35(1)B825(3)006A(4) 0.5 6 6 10.0 B T35(1)B106(3)006A(4) 0.5 6 6 12.0 C T35(1)C126(3)006A(4) 0.6 6 6 15.0 C T35(1)C156(3)006A(4) 0.7 6 6 18.0 D T35(1)D186(3)006A(4) 0.9 6 6 22.0 D T35(1)D226(3)006A(4) 1.1 6 6 27.0 E T35(1)E276(3)006A(4) 1.3 6 6 33.0 E T35(1)E336(3)006A(4) 1.6 6 6 39.0 F T35(1)F396(3)006A(4) 1.9 6 6 47.0 F T35(1)F476(3)006A(4) 2.3 6 6 56.0 G T35(1)G566(3)006A(4) 2.7 6 6 68.0 G T35(1)G686(3)006A(4) 3.3 6 6 82.0 H T35(1)H826(3)006A(4) 3.9 8 6 100.0 H T35(1)H107(3)006A(4) 4.8 8 6 120.0 J T35(2)J127(3)006A(4) 5.8 8 µA at 25°C (V) 85°C µF Case Code Maximum/5 Minutes 120 Hz Maximum KEMET Part Number Case Size Rated Voltage Rated Capacitance DC Leakage DF % at 25°C (1) To complete KEMET Part Number, insert Series Designation as follows: "0 = T350, "1" = T351, "2" = T352, "3" = T353, "4" = T354, "5" = T355, "6" = T356. (2) To complete KEMET Part Number, insert only Series Designation as follows: "0 = T350, "3" = T353, "4" = T354, "6" = T356. (3) To complete KEMET part number, insert M - 20%, K - ±10%, J - ± 5%. Designates Capacitance tolerance. (4) To complete KEMET part number, insert S = Standard coated or T=100% Sn (tin). Designates termination finish. Higher voltage and better capacitance tolerance products may be substitued for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Table 1 - Ratings and Part Number Reference cont. Case Code KEMET DC Rated Voltage Rated Capacitance Case DF % at 25°C Part Number Leakage Size µA at 25°C 120 Hz (V) 85°C µF Maximum/5 Minutes Maximum 6 150.0 J T35(2)J157(3)006A(4) 7.2 8 6 180.0 K T35(2)K187(3)006A(4) 8.6 8 6 220.0 K T35(2)K227(3)006A(4) 10.0 8 6 270.0 L T35(2)L227(3)006A(4) 10.0 8 6 330.0 L T35(2)L337(3)006A(4) 10.0 8 10 2.2 A T35(1)A225(3)010A(4) 0.5 5 10 2.7 A T35(1)A275(3)010A(4) 0.5 5 10 3.3 A T35(1)A335(3)010A(4) 0.5 5 10 3.9 A T35(1)A395(3)010A(4) 0.5 5 10 4.7 A T35(1)A475(3)010A(4) 0.5 5 10 5.6 B T35(1)B565(3)010A(4) 0.5 5 10 6.8 B T35(1)B685(3)010A(4) 0.5 5 10 8.2 C T35(1)C825(3)010A(4) 0.7 6 10 10.0 C T35(1)C106(3)010A(4) 0.8 6 10 12.0 E T35(1)E126(3)010A(4) 1.0 6 10 15.0 E T35(1)E156(3)010A(4) 1.2 6 10 18.0 E T35(1)E186(3)010A(4) 1.4 6 10 22.0 E T35(1)E226(3)010A(4) 1.8 6 10 27.0 F T35(1)F276(3)010A(4) 2.2 6 10 33.0 F T35(1)F336(3)010A(4) 2.6 6 10 39.0 G T35(1)G396(3)010A(4) 3.1 6 10 47.0 H T35(1)H476(3)010A(4) 3.8 6 10 56.0 H T35(1)H566(3)010A(4) 4.5 6 10 68.0 H T35(1)H686(3)010A(4) 5.4 6 10 82.0 J T35(1)J826(3)010A(4) 6.6 8 10 100.0 J T35(1)J107(3)010A(4) 8.0 8 10 120.0 K T35(2)K127(3)010A(4) 9.6 8 10 150.0 K T35(2)K157(3)010A(4) 10.0 8 10 180.0 L T35(2)L187(3)010A(4) 10.0 8 10 220.0 L T35(2)L227(3)010A(4) 10.0 8 16 1.5 A T35(1)A155(3)016A(4) 0.5 5 16 1.8 A T35(1)A185(3)016A(4) 0.5 5 16 2.2 A T35(1)A225(3)016A(4) 0.5 5 16 2.7 A T35(1)A275(3)016A(4) 0.5 5 16 3.3 A T35(1)A335(3)016A(4) 0.5 5 16 3.9 B T35(1)B395(3)016A(4) 0.5 5 16 4.7 B T35(1)B475(3)016A(4) 0.6 5 16 5.6 C T35(1)C565(3)016A(4) 0.7 5 16 6.8 C T35(1)C685(3)016A(4) 0.9 5 16 8.2 E T35(1)E825(3)016A(4) 1.0 6 16 10.0 E T35(1)E106(3)016A(4) 1.3 6 16 12.0 E T35(1)E126(3)016A(4) 1.5 6 16 15.0 E T35(1)E156(3)016A(4) 1.8 6 16 18.0 F T35(1)F186(3)016A(4) 2.2 6 16 22.0 F T35(1)F226(3)016A(4) 2.6 6 16 27.0 H T35(1)H276(3)016A(4) 3.2 6 16 33.0 H T35(1)H336(3)016A(4) 4.0 6 µA at 25°C (V) 85°C µF Case Code Maximum/5 Minutes 120 Hz Maximum KEMET Part Number Case Size Rated Voltage Rated Capacitance DC Leakage DF % at 25°C (1) To complete KEMET Part Number, insert Series Designation as follows: "0 = T350, "1" = T351, "2" = T352, "3" = T353, "4" = T354, "5" = T355, "6" = T356. (2) To complete KEMET Part Number, insert only Series Designation as follows: "0 = T350, "3" = T353, "4" = T354, "6" = T356. (3) To complete KEMET part number, insert M - 20%, K - ±10%, J - ± 5%. Designates Capacitance tolerance. (4) To complete KEMET part number, insert S = Standard coated or T=100% Sn (tin). Designates termination finish. Higher voltage and better capacitance tolerance products may be substitued for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Table 1 - Ratings and Part Number Reference cont. Case Code KEMET DC Rated Voltage Rated Capacitance Case DF % at 25°C Part Number Leakage Size µA at 25°C 120 Hz (V) 85°C µF Maximum/5 Minutes Maximum 16 39.0 J T35(2)J396(3)016A(4) 4.7 6 16 47.0 J T35(2)J476(3)016A(4) 5.6 6 16 56.0 K T35(2)K566(3)016A(4) 6.8 6 16 68.0 K T35(2)K686(3)016A(4) 8.2 6 16 82.0 L T35(2)L826(3)016A(4) 9.8 8 16 100.0 L T35(2)L107(3)016A(4) 10.0 8 16 120.0 M T35(2)M127(3)016A(4) 10.0 8 16 150.0 M T35(2)M157(3)016A(4) 10.0 8 20 1.0 A T35(1)A105(3)020A(4) 0.5 3 20 1.2 A T35(1)A125(3)020A(4) 0.5 5 20 1.5 A T35(1)A155(3)020A(4) 0.5 5 20 1.8 A T35(1)A185(3)020A(4) 0.5 5 20 2.2 A T35(1)A225(3)020A(4) 0.5 5 20 2.7 B T35(1)B275(3)020A(4) 0.5 5 20 3.3 B T35(1)B335(3)020A(4) 0.5 5 20 3.9 C T35(1)C395(3)020A(4) 0.6 5 20 4.7 C T35(1)C475(3)020A(4) 0.8 5 20 5.6 D T35(1)D565(3)020A(4) 0.9 5 20 6.8 D T35(1)D685(3)020A(4) 1.1 5 20 8.2 E T35(1)E825(3)020A(4) 1.3 6 20 10.0 E T35(1)E106(3)020A(4) 1.6 6 20 12.0 F T35(1)F126(3)020A(4) 1.9 6 20 15.0 F T35(1)F156(3)020A(4) 2.4 6 25 1.0 A T35(1)A105(3)025A(4) 0.5 3 25 1.2 A T35(1)A125(3)025A(4) 0.5 5 25 1.5 A T35(1)A155(3)025A(4) 0.5 5 25 1.8 A T35(1)A185(3)025A(4) 0.5 5 25 2.2 B T35(1)B225(3)025A(4) 0.5 5 25 2.7 B T35(1)B275(3)025A(4) 0.5 5 25 3.3 B T35(1)B335(3)025A(4) 0.7 5 25 3.9 C T35(1)C395(3)025A(4) 0.8 5 25 4.7 C T35(1)C475(3)025A(4) 0.9 5 25 5.6 E T35(1)E565(3)025A(4) 1.1 5 25 6.8 E T35(1)E685(3)025A(4) 1.4 5 25 8.2 E T35(1)E825(3)025A(4) 1.6 6 25 10.0 E T35(1)E106(3)025A(4) 2.0 6 25 12.0 G T35(1)G126(3)025A(4) 2.4 6 25 15.0 G T35(1)G156(3)025A(4) 3.0 6 25 18.0 H T35(1)H186(3)025A(4) 3.6 6 25 22.0 H T35(1)H226(3)025A(4) 4.4 6 25 27.0 J T35(2)J276(3)025A(4) 5.4 6 25 33.0 J T35(2)J336(3)025A(4) 6.6 6 25 39.0 K T35(2)K396(3)025A(4) 7.8 6 25 47.0 K T35(2)K476(3)025A(4) 9.4 6 25 56.0 L T35(2)L566(3)025A(4) 10.0 6 25 68.0 L T35(2)L686(3)025A(4) 10.0 6 35 0.10 A T35(1)A104(3)035A(4) 0.5 3 µA at 25°C (V) 85°C µF Case Code Maximum/5 Minutes 120 Hz Maximum KEMET Part Number Case Size Rated Voltage Rated Capacitance DC Leakage DF % at 25°C (1) To complete KEMET Part Number, insert Series Designation as follows: "0 = T350, "1" = T351, "2" = T352, "3" = T353, "4" = T354, "5" = T355, "6" = T356. (2) To complete KEMET Part Number, insert only Series Designation as follows: "0 = T350, "3" = T353, "4" = T354, "6" = T356. (3) To complete KEMET part number, insert M - 20%, K - ±10%, J - ± 5%. Designates Capacitance tolerance. (4) To complete KEMET part number, insert S = Standard coated or T=100% Sn (tin). Designates termination finish. Higher voltage and better capacitance tolerance products may be substitued for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Table 1 - Ratings and Part Number Reference cont. Case Code KEMET DC Rated Voltage Rated Capacitance Case DF % at 25°C Part Number Leakage Size µA at 25°C 120 Hz (V) 85°C µF Maximum/5 Minutes Maximum 35 0.12 A T35(1)A124(3)035A(4) 0.5 3 35 0.15 A T35(1)A154(3)035A(4) 0.5 3 35 0.18 A T35(1)A184(3)035A(4) 0.5 3 35 0.22 A T35(1)A224(3)035A(4) 0.5 3 35 0.27 A T35(1)A274(3)035A(4) 0.5 3 35 0.33 A T35(1)A334(3)035A(4) 0.5 3 35 0.39 A T35(1)A394(3)035A(4) 0.5 3 35 0.47 A T35(1)A474(3)035A(4) 0.5 3 35 0.56 A T35(1)A564(3)035A(4) 0.5 3 35 0.68 A T35(1)A684(3)035A(4) 0.5 3 35 0.82 A T35(1)A824(3)035A(4) 0.5 3 35 1.0 A T35(1)A105(3)035A(4) 0.5 3 35 1.2 B T35(1)B125(3)035A(4) 0.5 5 35 1.5 B T35(1)B155(3)035A(4) 0.5 5 35 1.8 C T35(1)C185(3)035A(4) 0.5 5 35 2.2 C T35(1)C225(3)035A(4) 0.6 5 35 2.7 D T35(1)D275(3)035A(4) 0.7 5 35 3.3 D T35(1)D335(3)035A(4) 0.9 5 35 3.9 E T35(1)E395(3)035A(4) 1.0 5 35 4.7 E T35(1)E475(3)035A(4) 1.3 5 35 5.6 F T35(1)F565(3)035A(4) 1.6 5 35 6.8 F T35(1)F685(3)035A(4) 1.9 5 35 8.2 G T35(1)G825(3)035A(4) 2.3 6 35 10.0 G T35(1)G106(3)035A(4) 2.8 6 35 12.0 J T35(2)J126(3)035A(4) 3.4 6 35 15.0 J T35(2)J156(3)035A(4) 4.2 6 35 18.0 K T35(2)K186(3)035A(4) 5.0 6 35 22.0 K T35(2)K226(3)035A(4) 6.2 6 35 27.0 L T35(2)L276(3)035A(4) 7.6 6 35 33.0 L T35(2)L336(3)035A(4) 9.2 6 35 39.0 M T35(2)M396(3)035A(4) 10.0 6 35 47.0 M T35(2)M476(3)035A(4) 10.0 6 50 0.10 A T35(1)A104(3)050A(4) 0.5 3 50 0.12 A T35(1)A124(3)050A(4) 0.5 3 50 0.15 A T35(1)A154(3)050A(4) 0.5 3 50 0.18 A T35(1)A184(3)050A(4) 0.5 3 50 0.22 A T35(1)A224(3)050A(4) 0.5 3 50 0.27 A T35(1)A274(3)050A(4) 0.5 3 50 0.33 A T35(1)A334(3)050A(4) 0.5 3 50 0.39 B T35(1)B394(3)050A(4) 0.5 3 50 0.47 B T35(1)B474(3)050A(4) 0.5 3 50 0.56 B T35(1)B564(3)050A(4) 0.5 3 50 0.68 B T35(1)B684(3)050A(4) 0.5 3 50 0.82 B T35(1)B824(3)050A(4) 0.5 3 50 1.0 B T35(1)B105(3)050A(4) 0.5 3 50 1.2 D T35(1)D125(3)050A(4) 0.5 5 50 1.5 E T35(1)E155(3)050A(4) 0.6 5 µA at 25°C (V) 85°C µF Case Code Maximum/5 Minutes 120 Hz Maximum KEMET Part Number Case Size Rated Voltage Rated Capacitance DC Leakage DF % at 25°C (1) To complete KEMET Part Number, insert Series Designation as follows: "0 = T350, "1" = T351, "2" = T352, "3" = T353, "4" = T354, "5" = T355, "6" = T356. (2) To complete KEMET Part Number, insert only Series Designation as follows: "0 = T350, "3" = T353, "4" = T354, "6" = T356. (3) To complete KEMET part number, insert M - 20%, K - ±10%, J - ± 5%. Designates Capacitance tolerance. (4) To complete KEMET part number, insert S = Standard coated or T=100% Sn (tin). Designates termination finish. Higher voltage and better capacitance tolerance products may be substitued for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Table 1 - Ratings and Part Number Reference cont. Case Code KEMET DC Rated Voltage Rated Capacitance Case DF % at 25°C Part Number Leakage Size µA at 25°C 120 Hz (V) 85°C µF Maximum/5 Minutes Maximum 50 1.8 E T35(1)E185(3)050A(4) 0.7 5 50 2.2 E T35(1)E225(3)050A(4) 0.9 5 50 2.7 F T35(1)F275(3)050A(4) 1.1 5 50 3.3 F T35(1)F335(3)050A(4) 1.3 5 50 3.9 G T35(1)G395(3)050A(4) 1.6 5 50 4.7 G T35(1)G475(3)050A(4) 1.9 5 50 5.6 H T35(1)H565(3)050A(4) 2.2 5 50 6.8 J T35(2)J685(3)050A(4) 2.7 5 50 8.2 J T35(2)J825(3)050A(4) 3.3 6 50 10.0 K T35(2)K106(3)050A(4) 4.0 6 50 12.0 K T35(2)K126(3)050A(4) 4.8 6 50 15.0 L T35(2)L156(3)050A(4) 6.0 6 50 18.0 L T35(2)L186(3)050A(4) 7.2 6 50 22.0 M T35(2)M226(3)050A(4) 8.8 0 µA at 25°C (V) 85°C µF Case Code Maximum/5 Minutes 120 Hz Maximum KEMET Part Number Case Size Rated Voltage Rated Capacitance DC Leakage DF % at 25°C (1) To complete KEMET Part Number, insert Series Designation as follows: "0 = T350, "1" = T351, "2" = T352, "3" = T353, "4" = T354, "5" = T355, "6" = T356. (2) To complete KEMET Part Number, insert only Series Designation as follows: "0 = T350, "3" = T353, "4" = T354, "6" = T356. (3) To complete KEMET part number, insert M - 20%, K - ±10%, J - ± 5%. Designates Capacitance tolerance. (4) To complete KEMET part number, insert S = Standard coated or T=100% Sn (tin). Designates termination finish. Higher voltage and better capacitance tolerance products may be substitued for an order within the same case size at KEMET's option. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Recommended Voltage Derating Guidelines 120% −55°C to 85°C 85°C to 125°C % Change in working 100% DCte vmoplteargaetu wreith VR 66% of VR Voltage 80% % Changweit ihn twemorpkeinragt DurCe voltage g 60% 67% n ki Wor 40% % 20% 0% -55 25 45 85 105 125 Temperature (°C) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to Maximum Power Dissipation Case Size equivalent series resistance (ESR) and the power dissipation (Pmax) Watts at 25°C capabilities of the device. Permissible AC ripple voltage that A 0.040 may be applied is limited by following criteria: B 0.050 1. Dissipated power must not exceed the limits specified C 0.060 for the Series. D 0.065 2. The positive peak AC voltage plus the DC bias voltage, E 0.070 if any, must not exceed the DC voltage rating of the F 0.080 G 0.090 capacitor. H 0.100 3. The negative peak AC voltage in combination with J 0.110 bias voltage, if any, must not exceed the allowable limits K 0.120 specified for reverse voltage. L 0.130 M 0.140 Thermal capacities for the various case sizes have been determined empirically and are listed below. The “ripple Using the P max of the device, the maximum allowable rms voltage” permissible may be calculated from the impedance ripple current or voltage may be determined. and ESR data shown in the respective product section. I(max) = √P max/R E(max) = Z √P max/R Temperature Compensation Multipliers for Maximum Power Dissipation I = rms ripple current (amperes) T ≤ 25°C T ≤ 85°C T ≤ 125°C E = rms ripple voltage (volts) 1.00 0.90 0.40 P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) T= Environmental Temperature Z = Impedance at specified frequency (ohms) The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Optimum Solder Wave Profile Mounting All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a recommended solder wave profile for both axial and radial leaded solid tantalum capacitors. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Construction Detailed Cross Section Yellow Resin Epoxy Silver (4th Layer) TaO Dielectric 2 5 (1st Layer) Carbon (3rd Layer) Tantalum MnO 2 (2nd Layer) Lead Tantalum Wire (+) Wire Tantalum Wire Lead Lead Wire (−) Wire (+) Capacitor Marking KEMET Trademark Polarity Stripe (+) Capacitance (pF code) Polarity Voltage Rating Date Code © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Storage Tantalum molded radial/axial capacitors should be stored in normal working environments. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60°C RH. Storage at high temperature may cause a small, temporary increase in leakage current (measured under standard conditions), but the original value is usually restored within a few minutes after application of rated voltage. Storage at high humidity may increase capacitance and dissipation factor. Solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information Table 2 – Packaging Quantity Standard Bulk Standard Reel Ammo Pack Case Size Reel C-Spec Quantity Quantity Quantity A 1,000 1,500 2,500 B 1,000 1,500 2,500 C 1,000 1,500 2,500 D 1,000 1,000 2,000 E 1,000 1,000 2,000 C-7301/7303 F 500 1,000 1,500 G 500 1,000 1,500 H 500 800 1,500 J 100 800 800 K 100 500 800 L, M 100 500 Pending 500 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 12 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar Figure 1 T 0 P A ∆H 2 1 P 1 2 3 A H 1 mm W 1 Maximum 1 T396/98* L F H0 W2 H (0.039”) 2 T350/51* W W0 1 3 T352/53/56** Tape Carrier 4 T354# D0 d L1 W2 5 T355+ T P1 P0 Nominal Tolerance Dimension Symbol mm (inch) mm (inch) Body Height (1) A 17.0 (0.67) Maximum Body Width (1) A 15.24 (0.600) Maximum 1 Sprocket Hole Diameter D 4.0 (0.157) ±0.3 (±0.012) 0 Lead Diameter d 0.51 (0.020) 0.64 (0.025) ±0.05 (±0.002) Lead Center (4) F See Note Below C-7301 C-7303 C-7301 C-7303 Component Base to Tape Center (4) H 16.0 (0.630) 18.0 (0.709) ±0.5 (±0.02) Minimum C-7301 C-7303 C-7301 C-7303 Lead Standoff Height H 0 16.0 (0.630) 18.0 (0.709) ±0.5 (±0.02) Minimum Component Height Above Tape Center H 32.25 (1.270) Maximum 1 Component Alignment Front to Rear ΔH 0 1.0 (0.039) Cut Out Length L 11.0 (0.433) Maximum Lead Protrusion L 1.0 (0.039) Maximum 1 Component Pitch (5) P 12.7 (0.500) ±1.0 (±0.039) Sprocket Hole Pitch (2) P 12.7 (0.500) ±0.03 (±0.012) 0 Sprocket Hole Center to Lead Center (3) (4) P See Note Below ±0.7 (±0.028) 1 Sprocket Hole Center to Component Center (5) P See Note Below 2 Body Thickness T 10.2 (0.400) Maximum 0 Total Tape Thickness T 0.7 (0.28) ±0.02 (±0.008) Carrier Tape Width W 18.0 (0.709) +1.0/−0.5 (+0.039/−0.020) Hold-Down Tape Width W 15 mm (0.561) 6 mm (0.236) +1.0/−0.8 (+0.039/−0.031 0 Sprocket Hole Location W 9.0 (0.354) +0.075/−0.5 (+0.030/−0.020) 1 Hold-Down Tape Location W 12.0 (0.472) Maximum 2 Notes: (1) See Dimensions table for specific values per case size. (2) Cumulative pitch error ± 1.0 mm (0.039) maximum in 20 F Dimensions: P Dimensions: 1 consecutive sprocket hole locations. 0.100" ±0.015 Lead Spacing (3) Measured at bottom of standoff. (4) P and F measured at egress from carrier tape. 0.125" ±0.015 0.100" – 0.200 ±0.028" 1 (5) P and P2 measured at egress from carrier tape. 0.200" ±0.015 0.125" – 0.187 ±0.028" * Lead spacings are 2.5 mm (0.098") center to center (T350 A-H) 0.250" ±0.015" 0.200" – 0.150 ±0.028" ** Lead spacings are 5.0 mm (0.197") center to center # Lead spacings are 6.35 mm (0.25") center to center 0.100" ±0.015 (3 leaded) 0.250" – 0.125 ±0.028" + Lead spacings are 3.18 mm (0.125") center to center 0.100" – 0.100 ±0.028" ( 3 leaded) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2043_T35X • 5/29/2019 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com