SY10ELT22 Micrel, Inc. DUAL TTL-to-DIFFERENTIAL SY1S0YE1L00TE2L2T22 PECL TRANSLATOR SY100ELT22 FEATURES DESCRIPTION (cid:1) 300ps typical propagation delay The SY10/100ELT22 are dual TTL-to-differential PECL (cid:1) <100ps output-to-output skew translators. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline (cid:1) Differential PECL outputs 8-lead SOIC package and the low skew, dual gate design (cid:1) PNP TTL inputs for minimal loading of the ELT22 makes it ideal for applications which require (cid:1) Flow-through pinouts the tranlation of a clock and a data signal. (cid:1) Available in 8-pin SOIC package The ELT22 is available in both ECL standards: the 10ELT is compatible with positive ECL 10H logic levels, while the 100ELT is compatible with positive ECL 100K logic levels. PIN NAMES Pin Function Qn Differential PECL Outputs Dn TTL Inputs VCC +5.0V Supply GND Ground M9999-052108 Rev.: H Amendment: /0 1 hbwhelp@micrel.com or (408) 955-1690 Issue Date: May 2008

SY10ELT22 Micrel SY100ELT22 PACKAGE/ORDERING INFORMATION Ordering Information(1) Package Operating Package Lead Q0 1 8 VCC Part Number Type Range Marking Finish /Q0 2 7 D0 SY10ELT22ZC Z8-1 Commercial HEL22 Sn-Pb PECL TTL SY10ELT22ZCTR(2) Z8-1 Commercial HEL22 Sn-Pb Q1 3 6 D1 SY100ELT22ZC Z8-1 Commercial XEL22 Sn-Pb /Q1 4 5 GND SY100ELT22ZCTR(2) Z8-1 Commercial XEL22 Sn-Pb SY100ELT22ZI Z8-1 Industrial XEL22 Sn-Pb 8-Pin SOIC (Z8-1) SY100ELT22ZITR(2) Z8-1 Industrial XEL22 Sn-Pb SY10ELT22ZG(3) Z8-1 Industrial HEL22 with Pb-Free Pb-Free bar-line indicator NiPdAu SY10ELT22ZGTR(2, 3) Z8-1 Industrial HEL22 with Pb-Free Pb-Free bar-line indicator NiPdAu SY100ELT22ZG(3) Z8-1 Industrial XEL22 with Pb-Free Pb-Free bar-line indicator NiPdAu SY100ELT22ZGTR(2, 3) Z8-1 Industrial XEL22 with Pb-Free Pb-Free bar-line indicator NiPdAu Notes: 1. Contact factory for die availability. Dice are guaranteed at T = 25°C, DC Electricals only. A 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-052108 2 hbwhelp@micrel.com or (408) 955-1690

SY10ELT22 Micrel, Inc. SY100ELT22 ABSOLUTE MAXIMUM RATINGS(1) TRUTH TABLE Symbol Paramter Value Unit D Q Q VCC Power Supply Voltage –0.5 to +7.0 V H H L VI TTL Input Voltage –0.5 to VCC V L L H II TTL Input Current –30 to +5.0 mA Open H L IOUT PECL Output Current mA — Continuous 50 — Surge 100 TLEAD Lead Temperature +260 °C (soldering, 20sec.) Tstore Storage Temperature –65 to +150 °C TA Operating Temperature –40 to +85 °C NOTE: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C TA = 0°C TA = +25°C TA = +85°C Symbol Parameter Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition ICC Power Supply Current — 30 — 30 — 30 — 30 mA — NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: +4.2V to +5.5V. 10ELT22 Series +4.75V to +5.5V. TTL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C TA = 0°C TA = +25°C TA = +85°C Symbol Parameter Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition VIH Input HIGH Voltage 2.0 — 2.0 — 2.0 — 2.0 — V — VIL Input LOW Voltage — 0.8 — 0.8 — 0.8 — 0.8 V — IIH Input HIGH Current — 20 — 20 — 20 — 20 µA VIN = 2.7V — 100 — 100 — 100 — 100 VIN = VCC IIL Input LOW Current — –0.2 — –0.2 — –0.2 — –0.2 mA VIN = 0.5V VIK Input Clamp Voltage — –1.2 — –1.2 — –1.2 — –1.2 V IIN = –18mA NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: +4.2V to +5.5V. 10ELT22 Series +4.75V to +5.5V. M9999-052108 3 hbwhelp@micrel.com or (408) 955-1690

SY10ELT22 Micrel SY100ELT22 PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C TA = 0°C TA = +25°C TA = +85°C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit VOH Output HIGH Voltage(2) mV 10ELT 3920 — 4110 3980 — 4160 4020 — 4190 4090 — 4280 100ELT 3915 — 4120 3975 — 4120 3975 — 4120 3975 — 4120 VOL Output LOW Voltage(2) mV 10ELT 3050 — 3350 3050 — 3370 3050 — 3370 3050 — 3405 100ELT 3170 — 3445 3190 — 3380 3190 — 3380 3190 — 3380 NOTES: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: +4.2V to +5.5V. 10ELT22 Series +4.75V to +5.5V. 2. These values are for VCC = 5.0V. Level Specifications will vary 1:1 with VCC. AC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40°C TA = 0°C TA = +25°C TA = +85°C Symbol Parameter Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition tPD Propagation Delay to Output D, 100 600 100 600 100 600 100 600 ps 50Ω to VCC – 2.0V ENECL/ENTTL tr Output Rise/Fall Time 200 500 200 500 200 500 200 500 ps 50Ω to VCC – 2.0V tf 20% to 80% tskpp Part-to-Part Skew(2) — 500 — 500 — 500 — 500 ps 50Ω to VCC – 2.0V tskew Within-Device Skew(2,3) — 100 — 100 — 100 — 100 ps 50Ω to VCC – 2.0V NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: +4.2V to +5.5V. 10ELT22 Series +4.75V to +5.5V. 2. Guaranteed, but not tested. 3. Same transition @common VCC levels. M9999-052108 4 hbwhelp@micrel.com or (408) 955-1690

SY10ELT22 Micrel, Inc. SY100ELT22 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2005 Micrel, Incorporated. M9999-052108 5 hbwhelp@micrel.com or (408) 955-1690

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrochip: SY10ELT22ZG SY100ELT22ZG SY10ELT22ZG TR SY10ELT22ZG-TR SY100ELT22ZG-TR