SN54LVC06A, SN74LVC06A HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS www.ti.com SCAS596N–OCTOBER1997–REVISEDJULY2005 FEATURES • OperateFrom1.65Vto3.6V • Maxt of3.7nsat3.3V pd • SpecifiedFrom–40(cid:176) Cto85(cid:176) C, • I SupportsPartial-Power-DownMode off –40(cid:176) Cto125(cid:176) C,and–55(cid:176) Cto125(cid:176) C Operation • InputsandOpen-DrainOutputsAccept • Latch-UpPerformanceExceeds250mAPer Voltagesupto5.5V JESD17 SN54LVC06A...J OR W PACKAGE SN74LVC06A...RGY PACKAGE SN54LVC06A...FK PACKAGE SN74LVC06A...D, DB, DGV, NS, (TOP VIEW) (TOP VIEW) OR PW PACKAGE (TOP VIEW) 1A VCC 1Y 1A NCVCC6A 1A 1 14 VCC 1 14 3 2 1 20 19 1Y 2 13 6A 1Y 2 13 6A 2A 4 18 6Y 2A 3 12 6Y 2A 3 12 6Y NC 5 17 NC 2Y 4 11 5A 2Y 4 11 5A 2Y 6 16 5A 3A 5 10 5Y 3A 5 10 5Y NC 7 15 NC 3Y 6 9 4A 3Y 6 9 4A 3A 8 14 5Y 9 10 11 12 13 GND 7 8 4Y 7 8 D Y Y D CY A N 4 3 N N4 4 G G NC - No internal connection DESCRIPTION/ORDERING INFORMATION Thesehexinverterbuffers/driversaredesignedfor1.65-Vto3.6-VV operation. CC The outputs of the 'LVC06A devices are open drain and can be connected to other open-drain outputs to implementactive-lowwired-ORoractive-highwired-ANDfunctions.Themaximumsinkcurrentis24mA. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators inamixed3.3-V/5-Vsystemenvironment. ORDERINGINFORMATION T PACKAGE(1) ORDERABLEPARTNUMBER TOP-SIDEMARKING A –40(cid:176) Cto85(cid:176) C QFN–RGY Reelof1000 SN74LVC06ARGYR LC06A Tubeof50 SN74LVC06AD SOIC–D Reelof2500 SN74LVC06ADR LVC06A Reelof250 SN74LVC06ADT SOP–NS Reelof2000 SN74LVC06ANSR LVC06A –40(cid:176) Cto125(cid:176) C SSOP–DB Reelof2000 SN74LVC06ADBR LC06A Tubeof90 SN74LVC06APW TSSOP–PW Reelof2000 SN74LVC06APWR LC06A Reelof250 SN74LVC06APWT TVSOP–DGV Reelof2000 SN74LVC06ADGVR LC06A CDIP–J Tubeof25 SNJ54LVC06AJ SNJ54LVC06AJ –55(cid:176) Cto125(cid:176) C CFP–W Tubeof150 SNJ54LVC06AW SNJ54LVC06AW LCCC–FK Tubeof55 SNJ54LVC06AFK SNJ54LVC06AFK (1) Packagedrawings,standardpackingquantities,thermaldata,symbolization,andPCBdesignguidelinesareavailableat www.ti.com/sc/package. Pleasebeawarethatanimportantnoticeconcerningavailability,standardwarranty,anduseincriticalapplicationsofTexas Instrumentssemiconductorproductsanddisclaimerstheretoappearsattheendofthisdatasheet. UNLESS OTHERWISE NOTED this document contains PRO- Copyright©1997–2005,TexasInstrumentsIncorporated DUCTIONDATAinformationcurrentasofpublicationdate.Prod- uctsconformtospecificationsperthetermsofTexasInstruments standard warranty. Production processing does not necessarily includetestingofallparameters.

SN54LVC06A, SN74LVC06A HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS www.ti.com SCAS596N–OCTOBER1997–REVISEDJULY2005 DESCRIPTION/ORDERING INFORMATION (CONTINUED) These devices are fully specified for partial-power-down applications using I . The I circuitry disables the off off outputs,preventingdamagingcurrentbackflowthroughthedevicewhenitispowereddown. FUNCTIONTABLE (EACHINVERTER) INPUT OUTPUT A Y H L L H LOGICDIAGRAM,EACHINVERTER(POSITIVELOGIC) A Y Absolute Maximum Ratings(1) overoperatingfree-airtemperaturerange(unlessotherwisenoted) MIN MAX UNIT V Supplyvoltagerange –0.5 6.5 V CC V Inputvoltagerange(2) –0.5 6.5 V I V Outputvoltagerange –0.5 6.5 V O I Inputclampcurrent V <0 –50 mA IK I I Outputclampcurrent V <0 –50 mA OK O I Continuousoutputcurrent – 50 mA O ContinuouscurrentthroughV orGND – 100 mA CC Dpackage(3) 86 DBpackage(3) 96 DGVpackage(3) 127 q Packagethermalimpedance (cid:176) C/W JA NSpackage(3) 76 PWpackage(3) 113 RGYpackage(4) 47 T Storagetemperaturerange –65 150 (cid:176) C stg P Powerdissipation(5)(6) T =–40(cid:176) Cto125(cid:176) C 500 mW tot A (1) Stressesbeyondthoselistedunder"absolutemaximumratings"maycausepermanentdamagetothedevice.Thesearestressratings only,andfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunder"recommendedoperating conditions"isnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. (2) Theinputandoutputnegative-voltageratingsmaybeexceedediftheinputandoutputcurrentratingsareobserved. (3) ThepackagethermalimpedanceiscalculatedinaccordancewithJESD51-7. (4) ThepackagethermalimpedanceiscalculatedinaccordancewithJESD51-5. (5) FortheDpackage:above70(cid:176) CthevalueofP derateslinearlywith8mW/K. tot (6) FortheDB,DGV,NS,andPWpackages:above60(cid:176) CthevalueofP derateslinearlywith5.5mW/K. tot 2

SN54LVC06A, SN74LVC06A HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS www.ti.com SCAS596N–OCTOBER1997–REVISEDJULY2005 Recommended Operating Conditions(1) SN54LVC06A(2) –55(cid:176) Cto125(cid:176) C UNIT MIN MAX Operating 1.65 3.6 V Supplyvoltage V CC Dataretentiononly 1.5 V =1.65Vto1.95V 0.65· V CC CC V High-levelinputvoltage V =2.3Vto2.7V 1.7 V IH CC V =2.7Vto3.6V 2 CC V =1.65Vto1.95V 0.35· V CC CC V Low-levelinputvoltage V =2.3Vto2.7V 0.7 V IL CC V =2.7Vto3.6V 0.8 CC V Inputvoltage 0 5.5 V I V Outputvoltage 0 5.5 V O V =1.65V 4 CC V =2.3V 8 CC I Low-leveloutputcurrent mA OL V =2.7V 12 CC V =3V 24 CC (1) AllunusedinputsofthedevicemustbeheldatV orGNDtoensureproperdeviceoperation.RefertotheTIapplicationreport, CC ImplicationsofSloworFloatingCMOSInputs,literaturenumberSCBA004. (2) Productpreview Recommended Operating Conditions(1) SN74LVC06A T =25(cid:176) C –40(cid:176) Cto85(cid:176) C –40(cid:176) Cto125(cid:176) C UNIT A MIN MAX MIN MAX MIN MAX Operating 1.65 3.6 1.65 3.6 1.65 3.6 V Supplyvoltage V CC Dataretentiononly 1.5 1.5 1.5 V =1.65Vto1.95V 0.65· V 0.65· V 0.65· V CC CC CC CC High-level V V =2.3Vto2.7V 1.7 1.7 1.7 V IH inputvoltage CC V =2.7Vto3.6V 2 2 2 CC V =1.65Vto1.95V 0.35· V 0.35· V 0.35· V CC CC CC CC Low-level V V =2.3Vto2.7V 0.7 0.7 0.7 V IL inputvoltage CC V =2.7Vto3.6V 0.8 0.8 0.8 CC V Inputvoltage 0 5.5 0 5.5 0 5.5 V I V Outputvoltage 0 5.5 0 5.5 0 5.5 V O V =1.65V 4 4 4 CC Low-level VCC=2.3V 8 8 8 I mA OL outputcurrent V =2.7V 12 12 12 CC V =3V 24 24 24 CC (1) AllunusedinputsofthedevicemustbeheldatV orGNDtoensureproperdeviceoperation.RefertotheTIapplicationreport, CC ImplicationsofSloworFloatingCMOSInputs,literaturenumberSCBA004. 3

SN54LVC06A, SN74LVC06A HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS www.ti.com SCAS596N–OCTOBER1997–REVISEDJULY2005 Electrical Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted) SN54LVC06A(1) PARAMETER TESTCONDITIONS V –55(cid:176) Cto125(cid:176) C UNIT CC MIN TYP(2) MAX I =100m A 1.65Vto3.6V 0.2 OL I =4mA 1.65V 0.45 OL V I =8mA 2.3V 0.7 V OL OL I =12mA 2.7V 0.4 OL I =24mA 3V 0.55 OL I V =5.5VorGND 3.6V – 5 m A I I I V =V orGND,I =0 3.6V 10 m A CC I CC O D I OneinputatV –0.6V,OtherinputsatV orGND 2.7Vto3.6V 500 m A CC CC CC C V =V orGND 3.3V 5 pF i I CC (1) Productpreview (2) T =25(cid:176) C A Electrical Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted) SN74LVC06A PARAMETER TESTCONDITIONS V T =25(cid:176) C –40(cid:176) Cto85(cid:176) C –40(cid:176) Cto125(cid:176) C UNIT CC A MIN TYP MAX MIN MAX MIN MAX I =100m A 1.65Vto3.6V 0.1 0.2 0.3 OL I =4mA 1.65V 0.24 0.45 0.6 OL V I =8mA 2.3V 0.3 0.7 0.75 V OL OL I =12mA 2.7V 0.4 0.4 0.6 OL I =24mA 3V 0.55 0.55 0.8 OL I V =5.5VorGND 3.6V – 1 – 5 – 20 m A I I I V orV =5.5V 0 – 1 – 10 – 20 m A off I O I V =V orGND,I =0 3.6V 1 10 40 m A CC I CC O D I OneinputatVCC–0.6V, 2.7Vto3.6V 500 500 5000 m A CC OtherinputsatV orGND CC C V =V orGND 3.3V 5 pF i I CC Switching Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted)(seeFigure1) SN54LVC06A(1) PARAMETER FROM TO V –55(cid:176) Cto125(cid:176) C UNIT (INPUT) (OUTPUT) CC MIN MAX 1.8V– 0.15V 1.4 5.6 2.5V– 0.2V 1 3.1 t A Y ns pd 2.7V 3.9 3.3V– 0.3V 1 3.7 (1) Productpreview 4

SN54LVC06A, SN74LVC06A HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS www.ti.com SCAS596N–OCTOBER1997–REVISEDJULY2005 Switching Characteristics overrecommendedoperatingfree-airtemperaturerange(unlessotherwisenoted)(seeFigure1) SN74LVC06A PARAMETER FROM TO V T =25(cid:176) C –40(cid:176) Cto85(cid:176) C –40(cid:176) Cto125(cid:176) C UNIT (INPUT) (OUTPUT) CC A MIN TYP MAX MIN MAX MIN MAX 1.8V– 0.15V 1.4 3 5.1 1.4 5.6 1.4 7.6 2.5V– 0.2V 1 1.9 2.8 1 3.1 1 4 t A Y ns pd 2.7V 1 2.4 3.7 1 3.9 1 5 3.3V– 0.3V 1 2.2 3.5 1 3.7 1 5 Operating Characteristics T =25(cid:176) C A TEST PARAMETER V TYP UNIT CONDITIONS CC 1.8V 2.1 C Powerdissipationcapacitanceperbuffer/driver f=10MHz 2.5V 2.3 pF pd 3.3V 2.5 5

SN54LVC06A, SN74LVC06A HEX INVERTER BUFFERS/DRIVERS WITH OPEN-DRAIN OUTPUTS www.ti.com SCAS596N–OCTOBER1997–REVISEDJULY2005 PARAMETER MEASUREMENT INFORMATION (OPEN DRAIN) VLOAD From Output RL S1 Open TEST S1 Under Test GND tPZL (see Notes E and F) VLOAD CL RL tPLZ (see Notes E and G) VLOAD (see Note A) tPHZ/tPZH VLOAD LOAD CIRCUIT INPUT VCC VI tr/tf VM VLOAD CL RL VD 1.8 V ± 0.15 V VCC ≤ 2 ns VCC/2 2 × VCC 30 pF 1 kW 0.15 V 2.5 V ± 0.2 V VCC ≤ 2 ns VCC/2 2 × VCC 30 pF 500 W 0.15 V 2.7 V 2.7 V ≤ 2.5 ns 1.5 V 6 V 50 pF 500 W 0.3 V 3.3 V ± 0.3 V 2.7 V ≤ 2.5 ns 1.5 V 6 V 50 pF 500 W 0.3 V VI Timing Input VM 0 V tw tsu th VI Input VM VM Data Input VM VM VI 0 V 0 V VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS PULSE DURATION SETUP AND HOLD TIMES VI Output VI Input VM VM Control VM VM 0 V 0 V tPLH tPHL tPZL tPLZ VOH Output VLOAD/2 Output VM VM VOL (WSs1ea eva etN fVooLtreOm AB D1) VM VOL + VD VOL tPHL tPLH tPZH tPHZ Output VM VM VVOOHL (WSs1ea eva etNO fVoouLtretOmp ABu D2)t VM VLOAD/2 - VD ≈V0L OVAD/2 VOLTAGE WAVEFORMS VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES ENABLE AND DISABLE TIMES INVERTING AND NONINVERTING OUTPUTS LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 W . D. The outputs are measured one at a time, with one transition per measurement. E. Since this device has open-drain outputs, tPLZ and tPZL are the same as tpd. F. tPZL is measured at VM. G. tPLZ is measured at VOL + VD . H. All parameters and waveforms are not applicable to all devices. Figure1.LoadCircuitandVoltageWaveforms 6

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) SN74LVC06AD ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC06A & no Sb/Br) SN74LVC06ADBR ACTIVE SSOP DB 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06ADE4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC06A & no Sb/Br) SN74LVC06ADGVR ACTIVE TVSOP DGV 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06ADR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC06A & no Sb/Br) SN74LVC06ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC06A & no Sb/Br) SN74LVC06ADT ACTIVE SOIC D 14 250 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC06A & no Sb/Br) SN74LVC06ANSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LVC06A & no Sb/Br) SN74LVC06APW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06APWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06APWT ACTIVE TSSOP PW 14 250 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LC06A & no Sb/Br) SN74LVC06ARGYR ACTIVE VQFN RGY 14 3000 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 125 LC06A & no Sb/Br) SN74LVC06ARGYRG4 ACTIVE VQFN RGY 14 3000 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 125 LC06A & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74LVC06A : •Automotive: SN74LVC06A-Q1 •Enhanced Product: SN74LVC06A-EP NOTE: Qualified Version Definitions: •Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 •Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 3

PACKAGE MATERIALS INFORMATION www.ti.com 20-Dec-2018 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) SN74LVC06ADGVR TVSOP DGV 14 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LVC06ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74LVC06ADT SOIC D 14 250 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74LVC06ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 SN74LVC06APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LVC06APWT TSSOP PW 14 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LVC06ARGYR VQFN RGY 14 3000 330.0 12.4 3.75 3.75 1.15 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 20-Dec-2018 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) SN74LVC06ADGVR TVSOP DGV 14 2000 367.0 367.0 35.0 SN74LVC06ADR SOIC D 14 2500 367.0 367.0 38.0 SN74LVC06ADT SOIC D 14 250 210.0 185.0 35.0 SN74LVC06ANSR SO NS 14 2000 367.0 367.0 38.0 SN74LVC06APWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74LVC06APWT TSSOP PW 14 250 367.0 367.0 35.0 SN74LVC06ARGYR VQFN RGY 14 3000 367.0 367.0 35.0 PackMaterials-Page2

MECHANICAL DATA MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,23 0,40 0,07 M 0,13 24 13 0,16 NOM 4,50 6,60 4,30 6,20 Gage Plane 0,25 0°–(cid:1)8° 0,75 1 12 0,50 A Seating Plane 0,15 1,20 MAX 0,08 0,05 PINS ** 14 16 20 24 38 48 56 DIM A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 4073251/E 08/00 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. D. Falls within JEDEC: 24/48 Pins – MO-153 14/16/20/56 Pins – MO-194 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

None

None

None

None

MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,65 0,15 M 0,22 28 15 0,25 0,09 5,60 8,20 5,00 7,40 Gage Plane 1 14 0,25 A 0°–(cid:1)8° 0,95 0,55 Seating Plane 2,00 MAX 0,05 MIN 0,10 PINS ** 14 16 20 24 28 30 38 DIM A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 4040065/E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

None

None

None

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated