图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: SN74HCT08N
  • 制造商: Texas Instruments
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

SN74HCT08N产品简介:

ICGOO电子元器件商城为您提供SN74HCT08N由Texas Instruments设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 SN74HCT08N价格参考。Texas InstrumentsSN74HCT08N封装/规格:逻辑 - 栅极和逆变器, AND Gate IC 4 Channel 14-PDIP。您可以下载SN74HCT08N参考资料、Datasheet数据手册功能说明书,资料中有SN74HCT08N 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

集成电路 (IC)半导体

描述

IC GATE AND 4CH 2-INP 14-DIP逻辑门 Quad 2-Input.

产品分类

逻辑 - 栅极和逆变器

品牌

Texas Instruments

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

逻辑集成电路,逻辑门,Texas Instruments SN74HCT08N74HCT

数据手册

点击此处下载产品Datasheet

产品型号

SN74HCT08N

PCN设计/规格

点击此处下载产品Datasheet

不同V、最大CL时的最大传播延迟

22ns @ 5.5V,50pF

产品

AND

产品目录页面

点击此处下载产品Datasheet

产品种类

逻辑门

传播延迟时间

27 ns

低电平输出电流

4 mA

供应商器件封装

14-PDIP

其它名称

296-1606
296-1606-5

包装

管件

单位重量

1 g

商标

Texas Instruments

安装类型

通孔

安装风格

Through Hole

封装

Tube

封装/外壳

14-DIP(0.300",7.62mm)

封装/箱体

PDIP-14

工作温度

-40°C ~ 85°C

工作温度范围

- 40 C to + 85 C

工厂包装数量

25

最大工作温度

+ 85 C

最小工作温度

- 40 C

栅极数量

4 Gate

标准包装

25

特性

-

电压-电源

4.5 V ~ 5.5 V

电流-输出高,低

4mA,4mA

电流-静态(最大值)

2µA

电源电压-最大

5.5 V

电源电压-最小

4.5 V

电路数

4

系列

SN74HCT08

输入/输出线数量

2 / 1

输入数

2

输入线路数量

2

输出线路数量

1

逻辑电平-低

0.8V

逻辑电平-高

2V

逻辑类型

与门

逻辑系列

HCT

高电平输出电流

- 4 mA

推荐商品

型号:74AHCT02PW,112

品牌:Nexperia USA Inc.

产品名称:集成电路(IC)

获取报价

型号:74AC02SC

品牌:ON Semiconductor

产品名称:集成电路(IC)

获取报价

型号:CD74HC27M

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:MC74VHC1G132DF2G

品牌:ON Semiconductor

产品名称:集成电路(IC)

获取报价

型号:CD40106BM96G4

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:SN74AUP1G14DRYR

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:SN74AHCT14QPWRQ1

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:MC74ACT05DG

品牌:ON Semiconductor

产品名称:集成电路(IC)

获取报价

样品试用

万种样品免费试用

去申请
SN74HCT08N 相关产品

74LVC3G14GN,115

品牌:Nexperia USA Inc.

价格:

NC7SV14P5X

品牌:ON Semiconductor

价格:¥1.10-¥1.46

SN74AHCT08RGYR

品牌:Texas Instruments

价格:¥询价-¥询价

74HC04PW/AUJ

品牌:NXP USA Inc.

价格:

74LCX86MX

品牌:ON Semiconductor

价格:

SN74HC27DR

品牌:Texas Instruments

价格:¥0.60-¥1.72

74HCT1G02GV,125

品牌:Nexperia USA Inc.

价格:¥0.55-¥2.80

NLU1GU04CMX1TCG

品牌:ON Semiconductor

价格:

PDF Datasheet 数据手册内容提取

SN54HCT08, SN74HCT08 QUADRUPLE 2-INPUT POSITIVE-AND GATES SCLS063D – NOVEMBER 1988 – REVISED AUIGUST 2003 (cid:0) (cid:0) Operating Voltage Range of 4.5 V to 5.5 V Typical tpd = 13 ns (cid:0) (cid:0) Outputs Can Drive Up To 10 LSTTL Loads ±4-mA Output Drive at 5 V (cid:0) (cid:0) Low Power Consumption, 20-µA Max I Low Input Current of 1 µA Max CC (cid:0) Inputs Are TTL-Voltage Compatible SN54HCT08...J OR W PACKAGE SN54HCT08...FK PACKAGE SN74HCT08...D, DB, N, NS, OR PW PACKAGE (TOP VIEW) (TOP VIEW) C B A C CB 1 1 N V 4 1A 1 14 VCC 1B 2 13 4B 1Y 43 2 1 20 1918 4A 1Y 3 12 4A NC 5 17 NC 2A 4 11 4Y 2A 6 16 4Y 2B 5 10 3B NC 7 15 NC 2Y 6 9 3A 2B 8 14 3B GND 7 8 3Y 9 10 1112 13 YD CY A 2N N3 3 G NC – No internal connection description/ordering information These devices contain four independent 2-input AND gates. They perform the Boolean function Y(cid:0)A • B or Y(cid:0)A(cid:1)B in positive logic. ORDERING INFORMATION ORDERABLE TOP-SIDE TA PACKAGE† PART NUMBER MARKING PDIP – N Tube of 25 SN74HCT08N SN74HCT08N Tube of 50 SN74HCT08D SSOOIICC –– DD Reel of 2500 SN74HCT08DR HHCCTT0088 Reel of 250 SN74HCT08DT –––––4444400000°CCCCC tttttooooo 8888855555°CCCCC SOP – NS Reel of 2000 SN74HCT08NSR HCT08 SSOP – DB Reel of 2000 SN74HCT08DBR HT08 Tube of 90 SN74HCT08PW TTSSSSOOPP –– PPWW Reel of 2000 SN74HCT08PWR HHTT0088 Reel of 250 SN74HCT08PWT CDIP – J Tube of 25 SNJ54HCT08J SNJ54HCT08J ––5555°CC ttoo 112255°CC CFP – W Tube of 150 SNJ54HCT08W SNJ54HCT08W LCCC – FK Tube of 55 SNJ54HCT08FK SNJ54HCT08FK †Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet. UNLESS OTHERWISE NOTED this document contains PRODUCTION Copyright  2003, Texas Instruments Incorporated DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

SN54HCT08, SN74HCT08 QUADRUPLE 2-INPUT POSITIVE-AND GATES SCLS063D – NOVEMBER 1988 – REVISED AUIGUST 2003 FUNCTION TABLE (each gate) INPUTS OOUUTTPPUUTT A B Y H H H L X L X L L logic diagram (positive logic) A Y B absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V CC Input clamp current, I (V < 0 or V > V ) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA IK I I CC Output clamp current, I (V < 0 or V > V ) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA OK O O CC Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA O O CC Continuous current through V or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA CC Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Storage temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C stg †Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) SN54HCT08 SN74HCT08 UUNNIITT MIN NOM MAX MIN NOM MAX VCC Supply voltage 4.5 5 5.5 4.5 5 5.5 V VIH High-level input voltage VCC = 4.5 V to 5.5 V 2 2 V VIL Low-level input voltage VCC = 4.5 V to 5.5 V 0.8 0.8 V VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V ∆t/∆v Input transition rise/fall time 500 500 ns TA Operating free-air temperature –55 125 –40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

SN54HCT08, SN74HCT08 QUADRUPLE 2-INPUT POSITIVE-AND GATES SCLS063D – NOVEMBER 1988 – REVISED AUIGUST 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TA = 25°C SN54HCT08 SN74HCT08 PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS VVCCCC UUNNIITT MIN TYP MAX MIN MAX MIN MAX IOH = –20 µA 4.4 4.499 4.4 4.4 VVOOHH VVII == VVIIHH oorr VVIILL 44..55 VV VV IOH = –4 mA 3.98 4.3 3.7 3.84 IOL = 20 µA 0.001 0.1 0.1 0.1 VVOOLL VVII == VVIIHH oorr VVIILL 44..55 VV VV IOL = 4 mA 0.17 0.26 0.4 0.33 II VI = VCC or 0 5.5 V ±0.1 ±100 ±1000 ±1000 nA ICC VI = VCC or 0, IO = 0 5.5 V 2 40 20 µA One input at 0.5 V or 2.4 V, ∆ICC† Other inputs at 0 or VCC 5.5 V 1.4 2.4 3 2.9 mA 4.5 V Ci to 5.5 V 3 10 10 10 pF †This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or VCC. switching characteristics over recommended operating free-air temperature range, C = 50 pF L (unless otherwise noted) (see Figure 1) FFRROOMM TTOO TA = 25°C SN54HCT08 SN74HCT08 PPAARRAAMMEETTEERR VVCCCC UUNNIITT (INPUT) (OUTPUT) MIN TYP MAX MIN MAX MIN MAX 4.5 V 15 24 35 30 ttppdd AA oorr BB YY nnss 5.5 V 13 22 32 27 4.5 V 9 15 22 19 tttt YY nnss 5.5 V 8 14 20 17 operating characteristics, T = 25°C A PARAMETER TEST CONDITIONS TYP UNIT Cpd Power dissipation capacitance per gate No load 20 pF PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3

SN54HCT08, SN74HCT08 QUADRUPLE 2-INPUT POSITIVE-AND GATES SCLS063D – NOVEMBER 1988 – REVISED AUIGUST 2003 PARAMETER MEASUREMENT INFORMATION 3 V From Output Test Under Test Point Input 1.3 V 1.3 V 0 V CL = 50 pF (see Note A) tPLH tPHL In-Phase VOH 90% 90% Output 1.3 V 1.3 V LOAD CIRCUIT 10% 10% VOL tr tf tPHL tPLH 3 V Input 1.3 V 2.7 V 2.7 V 1.3 V Out-of-Phase 90% 1.3 V 1.3 V 90% VOH 0.3 V 0.3 V 0 V Output 10% 10% VOL tr tf tf tr VOLTAGE WAVEFORM VOLTAGE WAVEFORMS INPUT RISE AND FALL TIMES PROPAGATION DELAY AND OUTPUT RISE AND FALL TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) SN74HCT08D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HCT08 & no Sb/Br) SN74HCT08DBR ACTIVE SSOP DB 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) SN74HCT08DE4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HCT08 & no Sb/Br) SN74HCT08DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HCT08 & no Sb/Br) SN74HCT08DRE4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HCT08 & no Sb/Br) SN74HCT08DRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HCT08 & no Sb/Br) SN74HCT08N ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 85 SN74HCT08N & no Sb/Br) SN74HCT08NE4 ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 85 SN74HCT08N & no Sb/Br) SN74HCT08PW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) SN74HCT08PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) SN74HCT08PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) SN74HCT08PWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) SN74HCT08PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) SN74HCT08PWT ACTIVE TSSOP PW 14 250 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 HT08 & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 30-Jun-2019 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) SN74HCT08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HCT08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HCT08PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74HCT08PWT TSSOP PW 14 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 30-Jun-2019 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) SN74HCT08DR SOIC D 14 2500 333.2 345.9 28.6 SN74HCT08DR SOIC D 14 2500 367.0 367.0 38.0 SN74HCT08PWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74HCT08PWT TSSOP PW 14 250 367.0 367.0 35.0 PackMaterials-Page2

None

None

None

None

None

MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,65 0,15 M 0,22 28 15 0,25 0,09 5,60 8,20 5,00 7,40 Gage Plane 1 14 0,25 A 0°–(cid:1)8° 0,95 0,55 Seating Plane 2,00 MAX 0,05 MIN 0,10 PINS ** 14 16 20 24 28 30 38 DIM A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 4040065/E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated