SN54AC04, SN74AC04 HEX INVERTERS SCAS519E − JULY 1995 − REVISED OCTOBER 2003 (cid:2) 2-V to 6-V V Operation CC (cid:2) Inputs Accept Voltages to 6 V (cid:2) Max t of 7 ns at 5 V pd SN54AC04...J OR W PACKAGE SN54AC04...FK PACKAGE SN74AC04...D, DB, N, NS, OR PW PACKAGE (TOP VIEW) (TOP VIEW) C Y A C CA 1 1 NV 6 1A 1 14 V CC 1Y 2 13 6A 3 2 1 20 19 2A 4 18 6Y 2A 3 12 6Y NC 5 17 NC 2Y 4 11 5A 2Y 6 16 5A 3A 5 10 5Y NC 7 15 NC 3Y 6 9 4A 3A 8 14 5Y GND 7 8 4Y 9 10 11 12 13 Y D CY A 3 N N4 4 G NC − No internal connection description/ordering information The ‘AC04 devices contain six independent inverters. The devices perform the Boolean function Y = A. ORDERING INFORMATION ORDERABLE TOP-SIDE TA PACKAGE† PART NUMBER MARKING PDIP − N Tube SN74AC04N SN74AC04N Tube SN74AC04D SSOOIICC − DD AACC0044 Tape and reel SN74AC04DR −4400°CC ttoo 8855°CC SOP − NS Tape and reel SN74AC04NSR AC04 SSOP − DB Tape and reel SN74AC04DBR AC04 Tube SN74AC04PW TTSSSSOOPP − PPWW AACC0044 Tape and reel SN74AC04PWR CDIP − J Tube SNJ54AC04J SNJ54AC04J −5555°CC ttoo 112255°CC CFP − W Tube SNJ54AC04W SNJ54AC04W LCCC − FK Tube SNJ54AC04FK SNJ54AC04FK †Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (each inverter) IINNPPUUTT OOUUTTPPUUTT A Y H L L H Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Copyright © 2003, Texas Instruments Incorporated Products conform to specifications per the terms of Texas Instruments On products compliant to MIL-PRF-38535, all parameters are tested standard warranty. Production processing does not necessarily include unless otherwise noted. On all other products, production testing of all parameters. processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

SN54AC04, SN74AC04 HEX INVERTERS SCAS519E − JULY 1995 − REVISED OCTOBER 2003 logic diagram, each inverter (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V CC Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Storage temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C stg †Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) SN54AC04 SN74AC04 UUNNIITT MIN MAX MIN MAX VCC Supply voltage 2 6 2 6 V VCC = 3 V 2.1 2.1 VVIIHH HHiigghh-lleevveell iinnppuutt vvoollttaaggee VCC = 4.5 V 3.15 3.15 VV VCC = 5.5 V 3.85 3.85 VCC = 3 V 0.9 0.9 VVIILL LLooww-lleevveell iinnppuutt vvoollttaaggee VCC = 4.5 V 1.35 1.35 VV VCC = 5.5 V 1.65 1.65 VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 3 V −12 −12 IIOOHH HHiigghh-lleevveell oouuttppuutt ccuurrrreenntt VCC = 4.5 V −24 −24 mmAA VCC = 5.5 V −24 −24 VCC = 3 V 12 12 IIOOLL LLooww-lleevveell oouuttppuutt ccuurrrreenntt VCC = 4.5 V 24 24 mmAA VCC = 5.5 V 24 24 Δt/Δv Input transition rise or fall rate 8 8 ns/V TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

SN54AC04, SN74AC04 HEX INVERTERS SCAS519E − JULY 1995 − REVISED OCTOBER 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) TA = 25°C SN54AC04 SN74AC04 PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS VVCC MIN TYP MAX MIN MAX MIN MAX UUNNIITT 3 V 2.9 2.99 2.9 2.9 IIOOHH = −5500 μμAA 4.5 V 4.4 4.49 4.4 4.4 5.5 V 5.4 5.49 5.4 5.4 IOH = −12 mA 3 V 2.56 2.4 2.46 VVOH 4.5 V 3.86 3.7 3.76 VV IIOH = −2244 mmAA 5.5 V 4.86 4.7 4.76 IOH = −50 mA† 5.5 V 3.85 IOH = −75 mA† 5.5 V 3.85 3 V 0.002 0.1 0.1 0.1 IIOOLL = 5500 μμAA 4.5 V 0.001 0.1 0.1 0.1 5.5 V 0.001 0.1 0.1 0.1 IOL =12 mA 3 V 0.36 0.5 0.44 VVOL 4.5 V 0.36 0.5 0.44 VV IIOL = 2244 mmAA 5.5 V 0.36 0.5 0.44 IOL = 50 mA† 5.5 V 1.65 IOL = 75 mA† 5.5 V 1.65 II VI = VCC or GND 5.5 V ±0.1 ±1 ±1 μA ICC VI = VCC or GND, IO = 0 5.5 V 2 40 20 μA Ci VI = VCC or GND 2.8 pF †Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms. switching characteristics over recommended operating free-air temperature range, V = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) CC FFRROOMM TTOO TA = 25°C SN54AC04 SN74AC04 PPAARRAAMMEETTEERR UUNNIITT (INPUT) (OUTPUT) MIN TYP MAX MIN MAX MIN MAX tPLH 1.5 4.5 9 1 11 1 10 AA YY nnss tPHL 1.5 4.5 8.5 1 10 1 9.5 switching characteristics over recommended operating free-air temperature range, V = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) CC FFRROOMM TTOO TA = 25°C SN54AC04 SN74AC04 PPAARRAAMMEETTEERR UUNNIITT (INPUT) (OUTPUT) MIN TYP MAX MIN MAX MIN MAX tPLH 1.5 4 7 1 8.5 1 7.5 AA YY nnss tPHL 1.5 3.5 6.5 1 7.5 1 7 operating characteristics, V = 5 V, T = 25°C CC A PARAMETER TEST CONDITIONS TYP UNIT Cpd Power dissipation capacitance CL = 50 pF, f = 1 MHz 45 pF POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3

SN54AC04, SN74AC04 HEX INVERTERS SCAS519E − JULY 1995 − REVISED OCTOBER 2003 PARAMETER MEASUREMENT INFORMATION TEST S1 Input VCC tPLH/tPHL Open (see Note B) 50% VCC 50% VCC 0 V tPLH tPHL 2 × VCC VOH 500 Ω S1 Open InO-Puhtapsuet 50% VCC 50% VCC From Output VOL Under Test tPHL tPLH CL = 50 pF 500 Ω (see Note A) VOH Out-of-Phase Output 50% VCC 50% VCC VOL LOAD CIRCUIT VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤2.5 ns, tf ≤ 2.5 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

PACKAGE OPTION ADDENDUM www.ti.com 28-Jul-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) Ball material (3) (4/5) (6) 5962-87609012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962- 87609012A SNJ54AC 04FK 5962-8760901CA ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 5962-8760901CA SNJ54AC04J 5962-8760901DA ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-8760901DA SNJ54AC04W SN74AC04D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04DBR ACTIVE SSOP DB 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04DE4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04N ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 85 SN74AC04N & no Sb/Br) SN74AC04NE4 ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 85 SN74AC04N & no Sb/Br) SN74AC04NSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04PW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04PWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SN74AC04PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 AC04 & no Sb/Br) SNJ54AC04FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962- 87609012A SNJ54AC 04FK Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 28-Jul-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) Ball material (3) (4/5) (6) SNJ54AC04J ACTIVE CDIP J 14 1 TBD SNPB N / A for Pkg Type -55 to 125 5962-8760901CA SNJ54AC04J SNJ54AC04W ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-8760901DA SNJ54AC04W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 28-Jul-2020 OTHER QUALIFIED VERSIONS OF SN54AC04, SN74AC04 : •Catalog: SN74AC04 •Automotive: SN74AC04-Q1, SN74AC04-Q1 •Enhanced Product: SN74AC04-EP, SN74AC04-EP •Military: SN54AC04 NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects •Enhanced Product - Supports Defense, Aerospace and Medical Applications •Military - QML certified for Military and Defense Applications Addendum-Page 3

PACKAGE MATERIALS INFORMATION www.ti.com 20-Dec-2018 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) SN74AC04DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74AC04PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 20-Dec-2018 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) SN74AC04DR SOIC D 14 2500 367.0 367.0 38.0 SN74AC04PWR TSSOP PW 14 2000 367.0 367.0 35.0 PackMaterials-Page2

None

None

None

None

PACKAGE OUTLINE J0014A CDIP - 5.08 mm max height SCALE 0.900 CERAMIC DUAL IN LINE PACKAGE PIN 1 ID A 4X .005 MIN (OPTIONAL) [0.13] .015-.060 TYP [0.38-1.52] 1 14 12X .100 [2.54] 14X .014-.026 14X .045-.065 [0.36-0.66] [1.15-1.65] .010 [0.25] C A B .754-.785 [19.15-19.94] 7 8 B .245-.283 .2 MAX TYP .13 MIN TYP [6.22-7.19] [5.08] [3.3] SEATING PLANE C .308-.314 [7.83-7.97] AT GAGE PLANE .015 GAGE PLANE [0.38] 0 -15 14X .008-.014 TYP [0.2-0.36] 4214771/A 05/2017 NOTES: 1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This package is hermitically sealed with a ceramic lid using glass frit. 4. Index point is provided on cap for terminal identification only and on press ceramic glass frit seal only. 5. Falls within MIL-STD-1835 and GDIP1-T14. www.ti.com

EXAMPLE BOARD LAYOUT J0014A CDIP - 5.08 mm max height CERAMIC DUAL IN LINE PACKAGE (.300 ) TYP [7.62] SEE DETAIL B SEE DETAIL A 1 14 12X (.100 ) [2.54] SYMM 14X ( .039) [1] 7 8 SYMM LAND PATTERN EXAMPLE NON-SOLDER MASK DEFINED SCALE: 5X .002 MAX (.063) [0.05] [1.6] METAL ALL AROUND ( .063) SOLDER MASK [1.6] OPENING METAL .002 MAX SOLDER MASK (R.002 ) TYP [0.05] OPENING [0.05] ALL AROUND DETAIL A DETAIL B SCALE: 15X 13X, SCALE: 15X 4214771/A 05/2017 www.ti.com

None

None

None

None

None

MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,65 0,15 M 0,22 28 15 0,25 0,09 5,60 8,20 5,00 7,40 Gage Plane 1 14 0,25 A 0°–(cid:1)8° 0,95 0,55 Seating Plane 2,00 MAX 0,05 MIN 0,10 PINS ** 14 16 20 24 28 30 38 DIM A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 4040065/E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated