SMM-1XX-XX-XX-D-XX-XX-X-XX REVISION BD OPTION No OF POS PER ROW -TR: TAPE & REEL MAX. POSITIONS AVAILABLE: DO NOT THROUGH HOLE: -01 THRU -40 27 VERTICAL/ 28 HORIZONTAL SCALE FROM SURFACE MOUNT: -02 THUR -40 (SEE SHEET 3)(SEE NOTE 13) THIS PRINT -FR: FULL REEL QTY. TAPE & REEL LEAD STYLE MAX. POSITIONS AVAILABLE: 27 VERTICAL/ 28 HORIZONTAL -01: THROUGH HOLE (SEE NOTE 14) (C-56-01-X) -02: SURFACE MOUNT OPTION 2 (C-56-02-X) -P: PICK & PLACE PAD (USE PPP-03, SEE FIG 3, SHT 2) PLATING OPTION -K: POLYIMIDE FILM ( NO. OF POS. x .0787[2.000])±.005[0.13] -S: 30μ" SELECTIVE GOLD IN CONTACT AREA, (USE K-DOT-.217-.313-.005) (SEE NOTE 11) MATTE TIN ON TAIL (2 POS MIN, SEE FIG 4, SHT 2) SEE NOTE 6 -F: 3μ" FLASH SELECTIVE GOLD IN CONTACT AREA, (AVAILABLE ON LEAD STYLE -02 ONLY) "A" (2 PLCS) MATTE TIN ON TAIL N 02 -H: 30μ" HEAVY GOLD IN CONTACT AREA, POLARIZING OPTION 3μ" GOLD ON TAIL INDICATE POSITION -L: 10μ" LIGHT SELECTIVE GOLD IN CONTACT AREA, (USE PK-07-N) MATTE TIN ON TAIL OPTION 1 CL - S M : 3M0μA"T TSEE LTEINC TOIVNE TGAOILLD IN CONTACT AREA, - L C : L(AOVCAKIILNAGB LCE LOIPN( LUYS EW 2IT LHC L-E0A5-DTM ST)YLE -02) -FM: 3μ" FLASH SELECTIVE GOLD IN CONTACT AREA, (SEE NOTE 5 & 12)(SEE FIG 5, SHT 2) MATTE TIN ON TAIL N-1 01 ROW OPTION "A" -D: DOUBLE ROW (USE SMM-XX-D-S) .1575 4.001 REF SMM-XX-D-S .080 2.03 REF CL .140 3.56 REF .015 0.38 REF .120 3.05 C .0787±.0050 2.000±0.127 C-56-01-X 2 MAX SWAY 2 MAX SWAY .020 0.51 REF (EITHER DIRECTION) (EITHER DIRECTION) C ( NO. OF POS. x .0787[2.000])-.0787[2.000] (ACCUM TOL. ±.005) SECTION "A"-"A" .130 3.30 C NOTES: FIG 1 -01: THROUGH HOLE 1. C REPRESENTS A CRITICAL DIMENSION. IN-PROCESS 2. RETENTION FORCE IN BODY TO BE: 1 Ibs. MIN -01 SHOWN 3. INSERTION FORCE TO BE: 3.0 oz. MAX. 4. WITHDRAWAL FORCE TO BE: 0.5 oz. MIN. 5. "-LC" OPTION FOR A 02 POSITION WILL HAVE ONLY ONE LOCKING CLIP (LC-05-TM). 6. "END WALLS" AFTER CUTTING SHOULD BE .025±.005. UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * 78.. FFOORR --0012 LLEEAADD SSTTYYLLEE, WLAITYHEORU PTA PCICKKA G& EP PLAOCSIET IOPANDS ,- L0A1 YTEHRR UP A-0C4K.AGE POSITION -02 ONLY. DTOIMLEENRASINOCNESS A ARER EIN: INCHES. TPMHRAOISNP DUROFIEACTCUATMRUYER ININNTFG OC,O RRNMEPTARATOIINODSNU C CAOTNNIODFN IAD,L EULN SDTEEI,A SPLIAG ATNNE, ND T RIGHTS 9. -02 THRU -05 POSITION WITH -K OR -P TO BE PACKAGED IN -TR ONLY. -06 THUR -40 POSITION AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE AVAILABLE IN TUBE OR -TR PACKAGING. .XX: .01 [0.3] 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 1101.. MNOA XFILMAUSMH ACLULTO FWLAEDSH I:N . 0S1O0C[.2K5E]T. OR EXTENDING BELOW LEADS. ..XXXXXX:X : .0.0050 2[00. 1[03.]051] ROWETRPHIRTEOTRED PNUR CCOEOJDENC,S TTE RINNAT NA OSNFFYE S RMARMAENDTEN OCER,R II NWNCCI.TOHROPOUTR ATTHEED E IXNP ARENSYS PeH-MOaNilE : i8n1fo2@-9S4A4-M67TE3C3 . c o mFA X : 8 1c2o-d94e8 -555034272 12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC OPTION IS MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL INSULATOR: LCP UL 94V-O, COLOR: BLACK 2 MM SOCKET STRIP PLACMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. CONTACT: BeCu DWG. NO. 13. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED ACCORDING SMM-1XX-XX-XX-D-XX-XX-X-XX TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM. 14. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, BASED ON OPTIONS SELECTED. BY: JOE Z 04/20/2016 SHEET 1 OF 3 F:\DWG\MISC\MKTG\SMM-1XX-XX-XX-D-XX-XX-X-XX-MKT.SLDDRW

REVISION BD NOTE : "R"=NO OF POS x .0787[2.000] C "S"={("R"-.394[10.01])/2} ± .020[0.51] 2 MAX SWAY (EITHER DIRECTION) .020 0.51 02 80 "R" .455 11.56 C CL .225 5.72 REF 79 01 ( NO. OF POS. x .0787[2.000])-.0787[2.000] IN-PROCESS (ACCUM TOL. ±.005) -02 SHOWN C PPP-03 .394 10.01 "S" REF "B" .080 2.03 REF CL 90°+0° (TYP) C -4° .140 3.56 REF .145 3.68 .050 1.27 .004[0.10] CL C "B" C-56-02-X FIG 3 .248 6.31 REF -P: PICK AND PLACE PAD FIG 2 (PLACE PPP-03 ABOUT CL AS SHOWN) -02: SURFACE MOUNT SECTION "B"-"B" (SAME AS FIG 1, DIFFERENT AS SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) (SEE NOTE 9) NOTE : "R"=USED MEASURED DIMENSION (REF) "S"={("R"-.2165[5.50])/2} ± .020[0.51] "R" .055 1.40 "S" .030±.020 0.76±0.51 .056 1.42 REF 2 MAX SWAY CL (EITHER DIRECTION) LC-05-TM .010 0.25 REF (SEE -LC OPTION) 2 MAX SWAY (EITHER DIRECTION) ( NO. OF POS. x .0787[2.000])-.1575[4.00] FIG 5 -LC: LOCKING CLIP (SAME AS FIG 1, DIFFERENT AS SHOWN) * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS .2170 5.51 REF .150 3.81 AINNCD. TSHAILSE DS ORCIGUHMTSE NATR ES HEAXLPLR NESOSTL YB ER EDSIESRCVLOEDSE BDY, ISNA MWTHEOCL, E ORERP PRAORDTU, CTOED A, NTRY AUNNSAFUERTRHEODR OIZRE DIN PCEORRSPOONR OART EEDN ITNIT AYN NYO R 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 FIG 4 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 -K: POLYIMIDE FILM PAD SHEET SCALE: 4:1 DESCRIPTION: 2 MM SOCKET STRIP (2 POSITION MINMUM, SEE NOTE 9) (SAME AS FIG 1, DIFFERENT AS SHOWN) DWG. NO. SMM-1XX-XX-XX-D-XX-XX-X-XX F:\DWG\MISC\MKTG\SMM-1XX-XX-XX-D-XX-XX-X-XX-MKT.SLDDRW BY:JOE Z 04/20/2016 SHEET 2 OF 3

REVISION BD PACKAGE PARTS IN TUBES AS SHOWN PT-1-24-03-16 PT-1-24-07-63 PT-1-24-02-16 POSITION 1 LOOSE END OF REEL USER DIRECTION OF UN-REELING POCKET NOT DETAILED PACKAGING VIEW * PROPRIETARY NOTE * -TR: TAPE AND REEL THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 ROETPHREORD PURCOEJDEC, TT RINA NASNFYE RMRAENDN OERR I WNCITOHROPOUTR ATTHEED E IXNP ARENSYS PHONE: 812-944-6733 FAX: 812-948-5047 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 SHEET SCALE: 4:1 DESCRIPTION: 2 MM SOCKET STRIP DWG. NO. SMM-1XX-XX-XX-D-XX-XX-X-XX F:\DWG\MISC\MKTG\SMM-1XX-XX-XX-D-XX-XX-X-XX-MKT.SLDDRW BY:JOE Z 04/20/2016 SHEET 3 OF 3