Features Applications n RoHS compliant* n IEC 61000-4-2 ESD (Min. Level 4) n Surface Mount SMC package n IEC 61000-4-4 EFT n Standoff Voltage: 5.0 to 170 volts n IEC 61000-4-5 Surge n Power Dissipation: 3000 watts SMLJ Transient Voltage Suppressor Diode Series General Information Agency Recognition The markets of portable communications, computing and video equipment are challenging Description the semiconductor industry to develop increasingly smaller electronic components. UL File Number: E153537 Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ps for unidirectional devices and less than 5.0 ps for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 3000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 300 Amps (JEDEC Method) (Note 3) Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Watts M(Faoxr imUnuimdi rIencsttiaonntaal nUenoiutss OFnolryw)ard Voltage @ IPP = 100 A SSMMLLJJ51.000AA ~ ~ S SMMLLJJ9107A0 A VF 35..50 Volts Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order SMLJ 5.0 CA - H Package Asia-Pacific: SMLJ = SMC/DO-214AB Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Europe: Suffix Tel: +36 88 885 877 • Email: eurocus@bourns.com A = 5 % Tolerance Unidirectional Device The Americas: CA = 5 % Tolerance Bidirectional Device Tel: +1-951 781-5500 • Email: americus@bourns.com Reel (blank) = 13 inch reel www.bourns.com -H = 7 inch reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

SMLJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Working Maximum Maximum Maximum Maximum Maximum Breakdown Clamping Peak Clamping Peak Unidirectional Peak Reverse Bidirectional Device Voltage Voltage Pulse Voltage Pulse Device Reverse Leakage VBR (Volts) Voltage @ VRWM (10@/10 I0p0p µ s) (1C0/u1r0r0e0n µts) (8@/2 0Ip µps ) C(8u/2r0r eµns)t Part Part Part Part Min. Max. @ IT VRWM IR Vc Ipp Vc Ipp Number Marking Number Marking (mA) (V) (μA) (V) (A) (V) (A) SMLJ5.0A HDE SMLJ5.0CA IDE 6.40 7.00 10 5 1000 9.2 326.00 12.00 1630.50 SMLJ6.0A HDG SMLJ6.0CA IDG 6.67 7.37 10 6 1000 10.3 291.30 13.40 1456.50 SMLJ6.5A HDK SMLJ6.5CA IDK 7.22 7.98 10 6.5 500 11.2 267.90 14.60 1339.50 SMLJ7.0A HDM SMLJ7.0CA IDM 7.78 8.60 10 7 200 12 250.00 15.60 1250.00 SMLJ7.5A HDP SMLJ7.5CA IDP 8.33 9.21 1 7.5 100 12.9 232.60 16.80 1163.00 SMLJ8.0A HDR SMLJ8.0CA IDR 8.89 9.83 1 8 50 13.6 220.60 17.70 1103.00 SMLJ8.5A HDT SMLJ8.5CA IDT 9.44 10.4 1 8.5 25 14.4 208.40 18.70 1041.50 SMLJ9.0A HDV SMLJ9.0CA IDV 10.0 11.1 1 9 10 15.4 194.80 20.00 974.00 SMLJ10A HDX SMLJ10CA IDX 11.1 12.3 1 10 5 17 176.40 22.10 882.50 SMLJ11A HDZ SMLJ11CA IDZ 12.2 13.5 1 11 5 18.2 164.80 23.70 824.00 SMLJ12A HEE SMLJ12CA IEE 13.3 14.7 1 12 2 19.9 150.60 25.90 754.00 SMLJ13A HEG SMLJ13CA IEG 14.4 15.9 1 13 2 21.5 139.40 28.00 697.50 SMLJ14A HEK SMLJ14CA IEK 15.6 17.2 1 14 2 23.2 129.40 30.20 646.50 SMLJ15A HEM SMLJ15CA IEM 16.7 18.5 1 15 2 24.4 123.00 31.70 615.00 SMLJ16A HEP SMLJ16CA IEP 17.8 19.7 1 16 2 26 115.40 33.80 577.00 SMLJ17A HER SMLJ17CA IER 18.9 20.9 1 17 2 27.6 106.60 35.90 543.50 SMLJ18A HET SMLJ18CA IET 20.0 22.1 1 18 2 29.2 102.80 38.00 513.50 SMLJ20A HEV SMLJ20CA IEV 22.2 24.5 1 20 2 32.4 92.60 42.10 463.00 SMLJ22A HEX SMLJ22CA IEX 24.4 26.9 1 22 2 35.5 84.40 46.20 422.50 SMLJ24A HEZ SMLJ24CA IEZ 26.7 29.5 1 24 2 38.9 77.20 50.60 385.50 SMLJ26A HFE SMLJ26CA IFE 28.9 31.9 1 26 2 42.1 71.20 54.70 356.50 SMLJ28A HFG SMLJ28CA IFG 31.1 34.4 1 28 2 45.4 66.00 59.00 330.50 SMLJ30A HFK SMLJ30CA IFK 33.3 36.8 1 30 2 48.4 62.00 62.90 310.00 SMLJ33A HFM SMLJ33CA IFM 36.7 40.6 1 33 2 53.3 56.20 69.30 281.50 SMLJ36A HFP SMLJ36CA IFP 40 44.2 1 36 2 58.1 51.60 75.50 258.00 SMLJ40A HFR SMLJ40CA IFR 44.4 49.1 1 40 2 64.5 46.40 83.90 232.50 SMLJ43A HFT SMLJ43CA IFT 47.8 52.8 1 43 2 69.4 43.20 90.20 216.00 SMLJ45A HFV SMLJ45CA IFV 50 55.3 1 45 2 72.7 41.20 94.50 206.50 SMLJ48A HFX SMLJ48CA IFX 53.3 58.9 1 48 2 77.4 38.80 100.60 194.00 SMLJ51A HFZ SMLJ51CA IFZ 56.7 62.7 1 51 2 82.4 36.40 107.10 182.00 SMLJ54A HGE SMLJ54CA IGE 60 66.3 1 54 2 87.1 34.40 113.20 172.00 SMLJ58A HGG SMLJ58CA IGG 64.4 71.2 1 58 2 93.6 32.00 121.70 160.50 SMLJ60A HGK SMLJ60CA IGK 66.7 73.7 1 60 2 96.8 31.00 125.80 155.00 SMLJ64A HGM SMLJ64CA IGM 71.1 78.6 1 64 2 103 29.20 133.90 145.50 SMLJ70A HGP SMLJ70CA IGP 77.8 86.0 1 70 2 113 26.60 146.90 132.50 SMLJ75A HGR SMLJ75CA IGR 83.3 92.1 1 75 2 121 24.80 157.30 124.00 SMLJ78A HGT SMLJ78CA IGT 86.7 95.8 1 78 2 126 22.80 163.80 119.00 SMLJ85A HGV SMLJ85CA IGV 94.4 104 1 85 2 137 20.80 178.10 109.50 SMLJ90A HGX SMLJ90CA IGX 100 111 1 90 2 146 20.60 189.80 102.50 SMLJ100A HGZ SMLJ100CA IGZ 111 123 1 100 2 162 18.60 210.60 92.50 SMLJ110A HHE SMLJ110CA IHE 122 135 1 110 2 177 16.80 230.10 84.50 SMLJ120A HHG SMLJ120CA IHG 133 147 1 120 2 193 15.60 250.90 77.50 SMLJ130A HHH SMLJ130CA IHH 144 159 1 130 2 209 14.40 271.70 72.00 SMLJ150A HHM SMLJ150CA IHM 167 185 1 150 2 243 12.40 315.90 61.50 SMLJ160A HHP SMLJ160CA IHP 178 197 1 160 2 259 11.60 336.70 58.00 SMLJ170A HHR SMLJ170CA IHR 189 209 1 170 2 275 11.00 357.50 54.50 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

SMLJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A A a B B C B b C c G D Dimension SMC (DO-214AB) 4.69 a (Max.) (0.185) H FC D 3.07 b (Min.) E (0.121) 1.52 c (Min.) F (0.060) Dimension SMC (DO-214AB) MM DIMENSIONS: (I6NC.6HE0S )- 7.11 MM A DIMENSIONS: (0.260 - 0.280) (INCHES) 5.59 - 6.22 B E (0.220 - 0.245) 2.90 - 3.20 Physical Specifications C D(IM0E.N1S1IO4N -S :0.1M2M6) Case ...........................................Molded plastic per UL Class 94V-0 0.15 - 0(.I3NC1H ES) D Polarity.......................Cathode band indicates unidirectional device (0.006 - 0.012) No cathode band indicates bidirectional device 7.75 - 8.13 E (0.305 - 0.320) 0.05 - 0.20 F (0.002 - 0.008) 2.00 - 2.62 G (0.079 - 0.103) 0.76 - 1.52 H (0.030 - 0.060) MM DIMENSIONS: (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

SMLJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 100 300 s) Peak Pulse Derating in Percent ofPeak Power or Current 752505 10 x 1000 Wbya vRe.fEo.rAm. as Defined Peak Forward Surge Current (Amp22115050500000 SiPnu(gJllsEeeD H WEaClifd MSthien t8eh.-3oW dm)avse 0 0 0 25 50 75 100 125 150 175 200 1 2 5 10 20 50 100 Junction Temperature (°C) Number of Cycles at 60 Hz Pulse Waveform Typical Junction Capacitance 100000 TR=10 µs TA= 25 °C 100 Peak value (IRSM) 10000 I, Peak Pulse Current (%)P 50 TA=T2P5 °C Half value=IR2SMdiwes1ca hd0asPeey rudxfsei len s 1ttfeeo0hind 0ew5e 0adp0ids e wb %tathayhk v a( oRceTtf u.f PpEoIrP)o.rrA meSin.nMtt . C - Junction Capacitance (pF)J 110010000 Bidirectional Unidirectional 0 1 0 1.0 2.0 3.0 4.0 1 10 100 1000 T, Time (ms) VBR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 100 5.0 TA = 25 °C Non-repetitive Pulse Waveform W) Shown in Pulse Waveform Graph on ( 4.0 ati W) 10 sip er (K er Dis 3.0 w w o o P P Peak 1.0 State 2.0 P, P 8.0 mm Lead Areas Steady 1.0 V) 60 Hz Resistive or M(A Inductive Load 0.1 R 0.0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 25 50 75 100 125 150 175 200 TP, Pulse Width TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CSDMDLFJN T5ra-0n5s0ie4nNt -V oTlVtaSg/Set Seeurpipnrge Dssioodr eD Aiordraey Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P1 E T d Index Hole 120 ° F D2 W B D1 D P A C Unidirectional Trailer Product Device Leader Orientation ....... ....... ....... ....... W1 End ....... ....... ....... ....... Start MM DIMENSIONS: (INCHES) 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard Direction of Feed RS-481-A and specifications shown here. Item Symbol SMC (DO-214AB) 7 Inch Reel 13 Inch Reel 6.0 ± 2.0 Carrier Width A (0.236 - 0.079) 8.3 ± 0.20 Carrier Length B (0.327 ± 0.008) 2.5 ± 0.20 Carrier Depth C (0.098 ± 0.008) 1.50 ± 0.10 Sprocket Hole d (0.059 ± 0.004) 178 330 Reel Outside Diameter D (7.008) (12.992) 50.0 Reel Inner Diameter D1 (1.969) MIN. 13.0 +0.50/-0.20 Feed Hole Diameter D2 (0.512 +0.020/-0.008) 1.75 ± 0.10 Sprocket Hole Position E (0.069 ± 0.004) 7.50 ± 0.10 Punch Hole Position F (0.295 ± 0.004) 8.00 ± 0.10 Punch Hole Pitch P (0.315 ± 0.004) 4.00 ± 0.10 Sprocket Hole Pitch P0 (0.157 ± 0.004) 2.00 ± 0.10 Embossment Center P1 (0.079 ± 0.004) 0.30 ± 0.10 Overall Tape Thickness T (0.012 ± 0.004) 16.00 ± 0.30 Tape Width W (0.630 ± 0.012) 22.4 Reel Width W1 (0.882) MAX. Quantity per Reel -- 500 3,000 REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R