SMAJ5.0(C)A – SMAJ200(C)A Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data  400W Peak Pulse Power Dissipation  Case: SMA  Glass Passivated Die Construction  Case Material: Molded Plastic. UL Flammability Classification  Unidirectional and Bidirectional Versions Available Rating 94V-0  Excellent Clamping Capability  Moisture Sensitivity: Level 1 per J-STD-020  Fast Response Time  Terminals: Lead-Free Plating (Matte Tin Finish).  Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Solderable per MIL-STD-202, Method 208  Halogen and Antimony Free. “Green” Device (Note 3)  Polarity Indicator: Cathode Band (Bi-Directional Devices do not  An Automotive- Compliant Part is Available Under Separate Have a Polarity Indicator) Datasheet (SMAJ5.0(C)AQ-SMAJ200(C)AQ)  Weight: 0.064 grams (Approximate) SMA Top View Bottom View Ordering Information (Note 4) Part Number Compliance Case Packaging SMAJXXX(C)A-13-F Standard SMA 5000/Tape & Reel *x = Device Voltage, Example: SMAJ170A-13-F Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. Marking Information xx = Product Type Marking Code YWW (See Electrical Characteristics Table) = Manufacturers’ Code Marking xx YWW = Date Code Marking Y = Last Digit of Year (ex: 9 for 2019) WW = Week Code (01 to 53) SMAJ5.0(C)A – SMAJ200(C)A 1 of 6 September 2019 Document number: DS19005 Rev. 18 - 2 www.diodes.com © Diodes Incorporated e3

SMAJ5.0(C)A – SMAJ200(C)A Maximum Ratings (@TA = +25°C unless otherwise specified.) Characteristic Symbol Value Unit Peak Pulse Power Dissipation (Non-Repetitive Current Pulse Derated above TA = +25°C) (Note 5) PPK 400 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Superimposed on Rated Load (Notes 5, 6 and 7) IFSM 40 A Steady State Power Dissipation @ TL = +75°C PM(AV) 1.0 W Instantaneous Forward Voltage @ IPP = 35A (Notes 5, 6, and 7) VF 3.5 V Notes: 5. Valid provided that terminals are kept at ambient temperature. 6. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum. 7. Unidirectional units only. Thermal Characteristics Characteristic Symbol Value Unit Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +175 °C SMAJ5.0(C)A – SMAJ200(C)A 2 of 6 September 2019 Document number: DS19005 Rev. 18 - 2 www.diodes.com © Diodes Incorporated

SMAJ5.0(C)A – SMAJ200(C)A Electrical Characteristics (@TA = +25°C unless otherwise specified.) Part Number Reverse Breakdown Max. Reverse Max. Peak Pulse Test Max. Clamping BAiddirde Cct iFoonra l SVtoalntadgoeff VBR @Vo ITlt a (gNeo te 9) Current Leak(Nagoete @ 1 0V) RWM Voltage @ IPP CuIrPrPe nt Marking Code (Note 8) VRWM (V) Min (V) Max (V) IT (mA) IR (µA) VC (V) (A) BI- UNI- SMAJ5.0(C)A 5.0 6.40 7.25 10 800 9.2 43.5 TE HE SMAJ6.0(C)A 6.0 6.67 7.37 10 800 10.3 38.8 TG HG SMAJ6.5(C)A 6.5 7.22 7.98 10 500 11.2 35.7 TK HK SMAJ7.0(C)A 7.0 7.78 8.60 10 200 12.0 33.3 TM HM SMAJ7.5(C)A 7.5 8.33 9.21 1.0 100 12.9 31.0 TP HP SMAJ8.0(C)A 8.0 8.89 9.83 1.0 50 13.6 29.4 TR HR SMAJ8.5(C)A 8.5 9.44 10.4 1.0 10 14.4 27.7 TT HT SMAJ9.0(C)A 9.0 10.0 11.1 1.0 5.0 15.4 26.0 TV HV SMAJ10(C)A 10 11.1 12.3 1.0 5.0 17.0 23.5 TX HX SMAJ11(C)A 11 12.2 13.5 1.0 5.0 18.2 22.0 TZ HZ SMAJ12(C)A 12 13.3 14.7 1.0 5.0 19.9 20.1 UE IE SMAJ13(C)A 13 14.4 15.9 1.0 5.0 21.5 18.6 UG IG SMAJ14(C)A 14 15.6 17.2 1.0 5.0 23.2 17.2 UK IK SMAJ15(C)A 15 16.7 18.5 1.0 5.0 24.4 16.4 UM IM SMAJ16(C)A 16 17.8 19.7 1.0 5.0 26.0 15.3 UP IP SMAJ17(C)A 17 18.9 20.9 1.0 5.0 27.6 14.5 UR IR SMAJ18(C)A 18 20.0 22.1 1.0 5.0 29.2 13.7 UT IT SMAJ20(C)A 20 22.2 24.5 1.0 5.0 32.4 12.3 UV IV SMAJ22(C)A 22 24.4 26.9 1.0 5.0 35.5 11.2 UX IX SMAJ24(C)A 24 26.7 29.5 1.0 5.0 38.9 10.3 UZ IZ SMAJ26(C)A 26 28.9 31.9 1.0 5.0 42.1 9.5 VE JE SMAJ28(C)A 28 31.1 34.4 1.0 5.0 45.4 8.8 VG JG SMAJ30(C)A 30 33.3 36.8 1.0 5.0 48.4 8.3 VK JK SMAJ33(C)A 33 36.7 40.6 1.0 5.0 53.3 7.5 VM JM SMAJ36(C)A 36 40.0 44.2 1.0 5.0 58.1 6.9 VP JP SMAJ40(C)A 40 44.4 49.1 1.0 5.0 64.5 6.2 VR JR SMAJ43(C)A 43 47.8 52.8 1.0 5.0 69.4 5.7 VT JT SMAJ45(C)A 45 50.0 55.3 1.0 5.0 72.7 5.5 VV JV SMAJ48(C)A 48 53.3 58.9 1.0 5.0 77.4 5.2 VX JX SMAJ51(C)A 51 56.7 62.7 1.0 5.0 82.4 4.9 VZ JZ SMAJ54(C)A 54 60.0 66.3 1.0 5.0 87.1 4.6 WE RE SMAJ58(C)A 58 64.4 71.2 1.0 5.0 93.6 4.3 WG RG SMAJ60(C)A 60 66.7 73.7 1.0 5.0 96.8 4.1 WK RK SMAJ64(C)A 64 71.1 78.6 1.0 5.0 103 3.9 WM RM SMAJ70(C)A 70 77.8 86.0 1.0 5.0 113 3.5 WP RP SMAJ75(C)A 75 83.3 92.1 1.0 5.0 121 3.3 WR RR SMAJ78(C)A 78 86.7 95.8 1.0 5.0 126 3.2 WT RT SMAJ85(C)A 85 94.4 104 1.0 5.0 137 2.9 WV RV SMAJ90(C)A 90 100 111 1.0 5.0 146 2.7 WX RX SMAJ100(C)A 100 111 123 1.0 5.0 162 2.5 WZ RZ SMAJ110(C)A 110 122 135 1.0 5.0 177 2.3 XE SE SMAJ120(C)A 120 133 147 1.0 5.0 193 2.0 XG SG SMAJ130(C)A 130 144 159 1.0 5.0 209 1.9 XK SK SMAJ150(C)A 150 167 185 1.0 5.0 243 1.6 XM SM SMAJ160(C)A 160 178 197 1.0 5.0 259 1.5 XP SP SMAJ170(C)A 170 189 209 1.0 5.0 275 1.4 XR SR SMAJ200(C)A 200 224 248 1.0 1.0 324 1.2 YT ST Notes: 8. Suffix C denotes Bi-directional device. 9. VBR measured with IT current pulse = 10ms to 15ms. 10. For Bidirectional devices having VRWM of 10V and under, the IR is doubled. SMAJ5.0(C)A – SMAJ200(C)A 3 of 6 September 2019 Document number: DS19005 Rev. 18 - 2 www.diodes.com © Diodes Incorporated

SMAJ5.0(C)A – SMAJ200(C)A 100 10,000 TJ = 25°C OF F) N % RENT 75 CE (p Unidirectional G IUR AN1,000 NC T ERATIR OR 50 APACI Bidirectional DE C E W L SO A ULP OT 100 PK T EAK PEA 25 C, T P Measured at 10 X 1000 Waveform f = 1MHz as defined by REA 1.0Vrms signal 10 Bias = 0Vdc 0 1 10 100 1,000 0 25 50 75 100 125 150 175 200 V , STANDOFF VOLTAGE (V) T , AMBIENT TEMPERATURE (°C) WM A Fig. 2 Typical Total Capacitance Fig. 1 Pulse Derating Curve 100 T = 25°C j )p W) %Ip ER (k psNuhloosnwe nrwe iapnve Fetiiftgoiv.r em4 ENT ( W 10 R O R P U E C S E L S U L P U K P A K E 1.0 A P E P, PK I, PP 0.1 0.1 1.0 10 100 1,000 10,000 t, TIME (ms) Fig. 4 Pulse Waveform NT (A) 60 ON (W) 1.0 E 50 TI R A R P 0.8 U SI C S E 40 DI G R UR WE 0.6 S D 30 PO AR E ORW 20 STAT 0.4 F Y K D A A PE 10 TE 0.2 , SM SV), F A I 0 M( 1 2 5 10 20 50 100 P 0.0 0 25 50 75 100 125 150 175 200 NUMBER OF CYCLES AT 60Hz T , LEAD TEMPERATURE (°C) Fig. 5 Maximum Non-Repetitive Surge Current L Fig. 6 Steady State Power Derating Curve SMAJ5.0(C)A – SMAJ200(C)A 4 of 6 September 2019 Document number: DS19005 Rev. 18 - 2 www.diodes.com © Diodes Incorporated

SMAJ5.0(C)A – SMAJ200(C)A Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. SMA B SMA A C Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 J H 0.76 1.52 J 1.96 2.40 All Dimensions in mm H G E Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SMA X1 X Dimensions Value (in mm) Y C 4.00 G 1.50 X 2.50 G X1 6.50 Y 1.70 C SMAJ5.0(C)A – SMAJ200(C)A 5 of 6 September 2019 Document number: DS19005 Rev. 18 - 2 www.diodes.com © Diodes Incorporated

SMAJ5.0(C)A – SMAJ200(C)A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2019, Diodes Incorporated www.diodes.com SMAJ5.0(C)A – SMAJ200(C)A 6 of 6 September 2019 Document number: DS19005 Rev. 18 - 2 www.diodes.com © Diodes Incorporated