NEW Type 2 PLc SIL1 Ultra-slim LIGHT CURTAIN SF2C SERIES Conforming to Machine Certified Certified by & EMC Directive NRTL Conforming to OSHA / ANSI Introducing Type 2 Ultra-slim Light Curtains! Featuring easy installation and reduced wiring Large built-in multi-purpose indicators Includes a large indicator that supports an extensive range of applications via external input. 13.2mm Smart equipment SF2C (with mounting bracket) *The picture is an image. 2013.05 panasonic.net/id/pidsx/global

Dramatically less wiring work Slim size for efficient applications Light curtain wiring consists of just five wires each for the Available work space is expanded from the previous emitter and receiver, allowing you to easily implement model, and productivity is improved. safety measures in about the same amount of time as with an area sensor. If the machine opening is 500 mm 19.685 in Previous SF2C Series SF4C Series (Type4) SF2C Series (Type2) Receiver Emitter Receiver Emitter Usable work space approx. 12 % UP Emitter Emitter (60 mm 2.362 in) 12 wires 5 wires Functions with just six wires (two each Usable work space Usable work space 0 V and 24 V and 83 % 95 % one each OSSD Gray cable Gray cable and SSD output)! (414 mm 16.299 in) (474 mm 18.661 in approx.) Receiver Receiver Gray cable 12 wires Gray cable 5 wires (with black line) (with black line) 43 mm 1.693 in 43 mm 13.2 mm 0.520 in 13.2 mm (including mounting bracket) 1.693 in (including mounting bracket) 0.520 in Note: Requires a safety circuit architecture that complies with the desired If the machine opening width is 500 mm 19.685 in If the machine opening width is 500 mm 19.685 in control category implemented using either an SF-C13 Control Unit, a safety relay, or other equipment. ORDER GUIDE Light curtains Type Appearance Operating range Model No. (Note 2) No. of beam Protective height (cid:17)(cid:15)(cid:18)(cid:78)(cid:1)0.328 ft Aofc tthuea l liogphet rcautirntagi nrange 39m.843 ft (Note 1) PNP output type NPN output type Channels (mm in) Setting range of the receiver Hand protection type Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch) BcNPheoraaB2.on0mteen amcemtmliv pe0i. t7hc8eh7i0g1 i.hn03t 9m410m 0.i3n m94m in 00..13 2to8 3tom 9.843 in SSSSSSSFFFFFFF2222222CCCCCCC-------HHHHHHH1122238260482-------PPPPPPP SSSSSSSFFFFFFF2222222CCCCCCC-------HHHHHHH1122238260482-------NNNNNNN 1122238260482 344562120864460000000 11122 2582596.......578014294949498887799 Emitter RecReeivceeirver cannot be placed in this ranRgeeceiver Notes: 1) The operating range is the possible setting distance between the emitter and the receiver. 2) The model No. with suffix “E” shown on the label affixed to the product is the emitter, “D” shown on the label is the receiver. Spare parts (Accessories for light curtain) Standard mounting bracket ・ MS-SFC-1 <Mountable in three directions> Light curtain Designation Model No. Description M5 hexagon-socket-head bolt ( Purchase separately. ) Allows the light curtain to be mounted at the rear with one M5 Standard hexagon-socket-head bolt. Mounting direction of the bracket MS-SFC-1 mounting bracket can be selected between vertical or horizontal (no dead zone). (4 pcs. per set for emitter and receiver) Light curtain Min. sensing object for regular checking Standard mounting Test rod ø25 SF4C-TR25 Four bracket set bracket MS-SFC-1 (ø25 mm ø0.984 in) Four M3 (length: (Accessory) 4 mm 0.157 in) countersunk screws M3 (length: 4 mm 0.157 in) countersunk screw with loose-proof agent OPTIONS Mounting bracket Designation Model No. Description NA2-N compatible mounting Used when changing over area sensor NA2-N series to the SF2C series. The mounting holes of NA2-N series can continue MS-SFC-2 bracket to be used. Center mounting by a M6 hexagon-socket-head bolt is also possible. (4 pcs. per set for emitter and receiver) Two ways of mounting are possible. 1 Rear mounting which enables beam adjustment 2 Dead zoneless center mounting Versatile bracket MS-SFC-3 on aluminum frame (4 pcs. per set for emitter and receiver) Intermediate supporting Used to support the light curtain in the middle. Be sure to purchase it when using MS-SFC-3 on SF2C-H28-P, SF2C-H28-N, MS-SFC-4 bracket for versatile bracket SF2C-H32-P, SF2C-H32-N. (2 pcs. per set for emitter and receiver) Metal protection case ・ MS-SFCH-8 ・ MS-SFCH- □ Control unit Applicable Designation Metal protection case (Excluding MS-SFCH-8) Designation Appearance Model No. Description beam channels (2 pcs. per set for emitter and receiver) SF2C-H□ Model No. 8 MS-SFCH-8 Use a discrete wire cable to 12 MS-SFCH-12 connect to the light curtain. Relay output. 16 MS-SFCH-16 Slim type SF-C13 Compatible with up to control 20 MS-SFCH-20 control unit category 4 (control category 24 MS-SFCH-24 2 when used together with 28 MS-SFCH-28 the SF2C series). 32 MS-SFCH-32 SF2C英文.indd 2 2013/04/24 16:42:06

Beam axis alignment made easy Simple Safety Distance Calculations The emitter has an effective aperture angle of ±5° or less The response time of all finger protection light curtains for an operating range of 3 m 9.843 ft. Compared to Type in the finger type is 20 ms or less. Recalculation of the 4 light curtains (which have an effective aperture angle safety distance is unnecessary for each time light curtain of ±2.5° or less), the SF2C series is easy to align and length is changed. install. Operating range Effective aperture 3m 9.843 ft angle Light weight! 5 ° or less 5 ° or less The SF2C series is made of resin that is lighter than the conventional aluminum case type*. Its lightweight body eases the burden on the mounting surface of the equipment and contributes to overall Includes cables and mounting brackets reduced weight during equipment transportation or The SF2C series includes cables (3 m 9.843 ft) for use overseas shipment. *Except the cable part with all models and standard mounting brackets (MS-SFC-1). Protection structure IP67 An IP67 (IEC) rating is achieved with an ultra-slim size for protection from environmental factors. SPECIFICATIONS Light curtain common specifications Type PNP output type NPN output type Item Model No. SF2C-H□-P SF2C-H□-N Operating range 0.1 to 3 m 0.328 to 9.843 ft Beam pitch 20 mm 0.787 in Min. sensing object ø25 mm ø0.984 in opaque object Effective aperture angle ±5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)] Supply voltage 24 V DC ± 20 % Ripple P-P 10 % or less Control output (OSSD) Max. source current: 200 mA Max. sink current: 200 mA Operation mode ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the light curtain or the synchronization signal) Protection circuit Incorporated Response time OFF response: 20 ms or less, ON response: 80 to 100 ms Lockout output (SSD) Max. source current: 60 mA Max. sink current: 60 mA Operation mode ON during normal operation, OFF during lockout (Note2) Protection circuit Incorporated Pollution degree 3 Operating altitude 2,000 m 6561.680 ft or less (Note3) Environmental resistance DAAmmegbbriieeeenn tto thfe upmmropidteeirtcayttiuorne –10 to +55 °C +14 to +131 °F (No dew condensa3ti0o nto o 8r 5ic %ing RI PaH6ll,o5 Sw, tIeoPdr6a)7,（g SeIt:Eo 3Cr0a） gtoe :8 –52 %5 t oR H+60 °C –13 to +140 °F Emitting element Infrared LED (Peak emission wavelength: 850 nm 0.034 mil) Cable 0.16 mm2 5-core heat-resistant PVC cable, 3 m 9.842 ft long Material Enclosure: Polycarbonate alloy, Sensing surface: Polycarbonate alloy, MS-SFC-1 (Standard mounting bracket) : Stainless steel (SUS) Accessories MS-SFC-1 (Standard mounting bracket): 1 set, SF4C-TR25 (Test rod): 1 No. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. 3) Do not use or storage in environment of more than atmospheric pressure at sea level. Light curtain individual specifications Type Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch) Item Model No. PNNPNP oouuttppuutt ttyyppee SSFF22CC--HH88--NP SSFF22CC--HH1122--NP SSFF22CC--HH1166--NP SSFF22CC--HH2200--NP SSFF22CC--HH2244--NP SSFF22CC--HH2288--NP SSFF22CC--HH3322--NP No. of beam channels 8 12 16 20 24 28 32 Protective height 160 mm 6.299 in 240 mm 9.449 in 320 mm 12.598 in 400 mm 15.748 in 480 mm 18.898 in 560 mm 22.047 in 640 mm 25.197 in Current consumption LiLinnaaddrriiggcceeaa ttmmoorruu lllliittggii--hh ppttssuu roruppfpfoossee RREEeemmcciieettttiieevveerr::rr ::23 235550 mm mmAAAA oooorrrr lllleeeessssssss REemciettiever:r :3R 3E5e5 mm cmAeiAt it ovoerre r ll:ere :ss3 ss300 m REmemAcA ieto tieovrer r:lr e:4l e3s05s sm smAA oorr lleessss REemciettiever:r :4 400 m mAA oorr lleessss REemciettiever:r :4R 4E5e0 mm cmAeiAt it ovoerre r ll:ere :ss3 ss355 m REmemAcA ieto tieovrer r:lr e:4l e4s55s sm smAA oorr lleessss REemciettiever:r :5 405 m mAA oorr lleessss PFHD PNP output type 3.60×10–9 3.66×10–9 3.73×10–9 3.79×10–9 3.85×10–9 3.92×10–9 3.98×10–9 (Note) NPN output type 3.74×10–9 3.80×10–9 3.86×10–9 3.93×10–9 3.99×10–9 4.05×10–9 4.12×10–9 MTTFd (Note) 100 years or more Net weight (Total of emitter and receiver) 280 g approx. 340 g approx. 400 g approx. 460 g approx. 520 g approx. 580 g approx. 640 g approx. Note: PFHD; Probability of dangerous failure per hour, MTTFd; Mean time to dangerous failure. SF2C英文.indd 3 2013/04/24 16:42:07

I/O CIRCUIT AND WIRING DIAGRAMS Connection example Basic wiring: Min. operation only This is the general configuration using one set of the emitter and receiver facing each other. The control output (OSSD) turns OFF if the light is interrupted, while it automatically turns ON if receive the light. <PNP output type SF2C-H□-P> <NPN output type SF2C-H□-N> Receiver Emitter Receiver Emitter (Green) Interference prevention output (Green) Interference prevention output (Pink) Test input (Pink) Test input (Orange) Large multi-purpose indicator input (Orange) Large multi-purpose indicator input (Brown) +V (Brown) +V (Blue) 0 V + 24V DC (Blue) 0 V + 24V DC – ±20% – ±20% (Brown) +V (Brown) +V Gray Cable (White) Lockout outpu(cid:674)t SSD(cid:675) Gray Cable (White) Lockout outpu(cid:674)tSSD(cid:675)Load (Black) Control output (OSSD) (Black) Control output (OSSD) K1(Note) Load Gray Cable (Blue) 0 V K1(Note) Gray Cable (Blue) 0 V (with black line) (with black line) (Gray) Frequency setting input (Gray) Frequency setting input Note: Requires a safety circuit architecture that complies with the desired control category implemented using either an SF-C13 Control Unit, a safety relay, or other equipment. The CAD data in the dimensions can be downloaded from our website. DIMENSIONS (Unit: mm in) Refer to our web site for the dimensions of mounting bracket etc. SF2C-H□ Light curtain Mounting bracket assembly dimensions Mounting drawing for the light curtains using the standard mounting brackets MS-SFC-1 (accessory). <Center mounting> <Dead zoneless mounting> 30 13.2 0.520 30 13.2 0.520 30 13.2 0.520 30 13.2 0.520 1.181 (7.7 0.303) 1.181 (7.7 0.303) 1.181 (7.7 0.303) 1.181 (7.7 0.303) 10 0.394 t 2 t 0.079 10 0.394 t 2 t 0.079 21 t 2 t 0.079 21 t 2 t 0.079 0.827 0.827 5.4 0.213 5.4 0.213 12 12 Display 13 0.512 Display 13 0.512 0.472 0.472 section section Display (10.5) 13 0.512 Display (10.5) 13 0.512 section section (10.5 0.413) (10.5 0.413) 0.413 0.413 (62.75) (62.75) (62.75) (62.75) 2.470 2.470 2.470 2.470 DCBA (88 3.465) (88 3.465) DCBA (88 3.465) (88) E (3.84865)A B (88 3.465) BA (3.84865) E (3.84865) Large multi-purpose indicator Large Large Large Large Large Large multi-purpose Large multi-purpose Beam multi-purpose multi-purpose Beam multi-purpose multi-purpose Beam indicator Beam multi-purpose indicator pitch indicator indicator pitch indicator indicator pitch pitch indicator 20 0.787 20 0.787 20 0.787 20 0.787 1610 0.394 1610 0.394 10 0.394 10 0.394 0.630 0.630 ø3.7 ø3.7 Gray Cable ø3.7 ø3.7 Gray Cable Gray Cable (with black line) Gray Cable (with black line) Emitter Receiver Emitter Receiver Model No. A B C D E SF2C-H8□ 140 5.512 160 6.299 172 6.772 184 7.244 130 5.118 SF2C-H12□ 220 8.661 240 9.449 252 9.921 264 10.394 210 8.268 SF2C-H16□ 300 11.811 320 12.598 332 13.071 344 13.543 290 11.417 SF2C-H20□ 380 14.961 400 15.748 412 16.220 424 16.693 370 14.567 SF2C-H24□ 460 18.110 480 18.898 492 19.370 504 19.842 450 17.717 SF2C-H28□ 540 21.260 560 22.047 572 22.520 584 22.992 530 20.866 SF2C-H32□ 620 24.409 640 25.197 652 25.669 664 26.142 610 24.016 2013.05 panasonic.net/id/pidsx/global Panasonic Industrial Devices SUNX Co., Ltd. Global Sales Department 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan ■ ■ Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 No. CE-SF2C-5 May, 2013 All Rights Reserved ©Panasonic Industrial Devices SUNX Co., Ltd. 2013 SF2C英文.indd 4 2013/04/24 16:42:08