RCWE www.vishay.com Vishay Dale Thick Film Surface Mount Chip Resistors, Wraparound, Extremely Low Value (0.01  to 0.976 ) FEATURES • Extremely low resistance values  (0.01  to 0.976 ) • Sulfur resistant (per ASTM B809-95 humid vapor test) • Enhanced power rating due to long side terminal construction (0612, 1020 types) • Suitable for current sensing and shunts • Metal glaze on high quality ceramic DESIGN SUPPORT TOOLS click logo to get started • Protective overglaze • Lead (Pb)-free solder contacts on Ni barrier layer Models • AEC-Q200 qualified Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING TEMPERATURE RESISTANCE GLOBAL  TOLERANCE CASE SIZE P COEFFICIENT RANGE E-SERIES (2) MODEL 70 °C ± % W ± ppm/°C  400 0.033 to 0.05 5.0 24 RCWE0402 0402 0.125 200 0.051 to 0.196 1.0, 5.0 24; 96 100 0.2 to 0.976 0.5 (1), 1.0, 5.0 700 0.010 to 0.018 5.0 24 400 0.02 to 0.0324 1.0, 5.0 RCWE0603 0603 0.2 200 0.033 to 0.105 1.0, 5.0 24; 96 100 0.11 to 0.976 0.5 (1), 1.0, 5.0 400 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE0805 0805 0.25 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 300 0.010 to 0.016 2.0, 5.0 24 RCWE0612 0612 1.0 200 0.018 to 0.2 2.0, 5.0 100 0.205 to 0.976 1.0, 5.0 24; 96 600 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE1206 1206 0.5 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 500 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE1210 1210 1.0 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 200 0.010 to 0.016 2.0, 5.0 24 RCWE1020 1020 2.0 100 0.0162 to 0.976 1.0, 5.0 24; 96 600 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE2010 2010 1.0 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 600 0.010 to 0.018 5.0 24 300 0.02 to 0.0324 1.0, 5.0 RCWE2512 2512 2.0 200 0.033 to 0.05 1.0, 5.0 24; 96 100 0.051 to 0.976 0.5 (1), 1.0, 5.0 Notes • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material • Part marking: Reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020) (1) Tight tolerance of 0.5 % is available for resistance values above 0.300  (0402 size) and above 0.200  (0603 to 2512 sizes) (2) Use E24 decades only for 5.0 % tolerance. E24 or E96 decades are available for 0.5 % and 1.0 % tolerance. Refer to standard decade table (www.vishay.com/doc?31001) Revision: 21-Aug-2018 1 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RCWE060351L0FNEA (visit www.vishay.net Vishay Dale parts numbering manual for all options) R C W E 0 6 0 3 5 1 L 0 F N E A GLOBAL MODEL VALUE TOLERANCE TCR PACKAGING SPECIAL (8 digits) (4 digits) (1 digit) (1 digit) (2 digits) (up to 2 digits) RCWE0402 L = m * D = ± 0.5 % K = ± 100 ppm/°C EA = lead (Pb)-free, (dash number) RCWE0603 R = decimal F = ± 1.0 % N = ± 200 ppm/°C tape/reel from 1 to 99 as RCWE0805 10L0 = 0.01  G = ± 2.0 % M = ± 300 ppm/°C applicable RCWE0612 R470 = 0.47  J = ± 5.0 % Q = ± 400 ppm/°C RCWE1206 Note: P = ± 500 ppm/°C RCWE1210 * Use “L” for resistance T = ± 600 ppm/°C RCWE1020 values < 0.1  G = ± 700 ppm/°C RCWE2010 RCWE2512 TECHNICAL SPECIFICATIONS PARAMETER UNIT 0402 0603 0805 0612 1206 1210 1020 2010 2512 Operating temperature range °C -55 to +155 Maximum operating voltage V (P x R)1/2 Insulation voltage U (1 min) V > 75 > 100 > 200 > 100 > 300 > 300 > 300 > 300 > 300 ins Insulation resistance  > 109 Weight/1000 pieces (typical) g 0.7 3 5.5 11.5 10.5 17.5 27.5 26 40.5 DIMENSIONS RCWE0402 to RCWE2512 RCWE0612, RCWE1020 T2 L a H l b a l b W T1 • 3D models available: www.vishay.com/doc?31106 • Surface mount solder profile recommendations: www.vishay.com/doc?31052 DIMENSIONS in millimeters SOLDER PAD DIMENSIONS in millimeters SIZE RESISTANCE RANGE L W H T1 T2 a b l  0402 0.033 to 0.976 1.05 ± 0.05 0.55 ± 0.05 0.35 ± 0.1 0.3 ± 0.15 0.25 ± 0.1 0.7 0.7 0.3 0.01 to 0.03 0.5 ± 0.2 0.9 1.0 0.4 0603 1.6 ± 0.1 0.85 ± 0.1 0.5 ± 0.1 0.3 ± 0.2 0.033 to 0.976 0.3 ± 0.2 0.7 1.0 0.8 0.01 to 0.03 0.6 ± 0.2 1.0 1.4 0.6 0805 2.0 ± 0.15 1.3 ± 0.1 0.55 ± 0.1 0.35 ± 0.2 0.033 to 0.976 0.4 ± 0.2 0.8 1.4 1.0 0612 0.01 to 0.976 1.6 ± 0.2 3.2 ± 0.2 0.6 ± 0.1 0.4 ± 0.15 0.25 ± 0.15 0.9 3.5 0.8 0.01 to 0.03 0.9 ± 0.2 1.3 1.8 1.0 1206 0.033 to 0.05 3.1 ± 0.15 1.6 ± 0.15 0.6 ± 0.1 0.8 ± 0.2 0.45 ± 0.2 1.2 1.8 1.2 0.051 to 0.976 0.45 ± 0.2 1.0 1.8 1.6 0.01 to 0.03 0.8 ± 0.2 1.3 2.6 1.1 1210 3.1 ± 0.2 2.5 ± 0.2 0.6 ± 0.1 0.4 ± 0.2 0.033 to 0.976 0.4 ± 0.2 0.9 2.6 2.0 1020 0.01 to 0.976 2.5 ± 0.2 5.0 ± 0.2 0.6 ± 0.1 0.55 ± 0.15 0.30 ± 0.15 1.2 5.5 1.4 0.01 to 0.03 1.6 ± 0.3 2.3 3.0 1.4 2010 0.033 to 0.05 5.0 ± 0.2 2.5 ± 0.15 0.6 ± 0.1 0.7 ± 0.3 0.6 ± 0.2 1.4 3.0 3.2 0.051 to 0.976 0.7 ± 0.3 1.4 3.0 3.2 0.01 to 0.03 2.0 ± 0.3 2.8 3.6 1.4 2512 0.033 to 0.05 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.8 ± 0.3 0.6 ± 0.2 1.6 3.6 3.8 0.051 to 0.976 0.8 ± 0.3 1.6 3.6 3.8 Revision: 21-Aug-2018 2 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RCWE www.vishay.com Vishay Dale DERATING % 120 n er i 100 w o P d 80 e at R 60 40 20 0 -55 -25 0 25 75 100 125 155 175 Ambient Temperature in °C 70 PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal shock MIL-STD-202, method 107, -55 °C to +125 °C, 300 cycles at each extreme ± 1.0 % + 0.0005  2x rated power; size and duration - 0402: 0.5 s, 0603 and 0805: 1 s, Short time overload ± 0.5 % + 0.0005  1206 and larger: 2 s High temperature exposure MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power ± 2.0 % + 0.0005  Temperature cycling JESD 22, method JA-104, 1000 cycles (-55 °C to +125 °C) ± 2.0 % + 0.0005  Biased humidity MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)1/2 ± 2.0 % + 0.0005  Mechanical shock MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions ± 1.0 % + 0.0005  Vibration MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz ± 1.0 % + 0.0005  Operational life MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power ± 2.0 % + 0.0005  MIL-STD-202, method 210, +260 °C solder, 10 s to 12 s dwell, 25 mm/s Resistance to solder heat ± 1.0 % + 0.0005  emergence Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± 2.0 % + 0.0005  PACKAGING REEL MODEL TAPE WIDTH DIAMETER PITCH PIECES/REEL CODE RCWE0402 8 mm/punched paper 180 mm/7" 2 mm 10 000 EA RCWE0603 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE0805 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE0612 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE1206 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE1210 8 mm/punched paper 180 mm/7" 4 mm 5000 EA RCWE1020 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA RCWE2010 12 mm/embossed plastic 180 mm/7" 4 mm 4000 EA RCWE2512 12 mm/embossed plastic 180 mm/7" 8 mm 2000 EA Notes • Embossed carrier tape per EIA-481-1A • Additional packaging details at: www.vishay.com/doc?31543 Revision: 21-Aug-2018 3 Document Number: 20019 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: RCWE0805R750FKEA RCWE0805R390FKEA RCWE0402R110FNEA RCWE0402R120FNEA RCWE0402R130FNEA RCWE0402R150FNEA RCWE0402R160FNEA RCWE0402R180FNEA RCWE0402R200FKEA RCWE0402R220FKEA RCWE0402R240FKEA RCWE0402R270FKEA RCWE0402R300FKEA RCWE0402R330FKEA RCWE0402R360FKEA RCWE0402R390FKEA RCWE0402R430FKEA RCWE0402R470FKEA RCWE0402R510FKEA RCWE0402R560FKEA RCWE0402R620FKEA RCWE0402R680FKEA RCWE0402R750FKEA RCWE0402R820FKEA RCWE0402R910FKEA RCWE0603R110FKEA RCWE0603R120FKEA RCWE0603R130FKEA RCWE0603R150FKEA RCWE0603R160FKEA RCWE0603R180FKEA RCWE0603R200FKEA RCWE0603R240FKEA RCWE0603R270FKEA RCWE0603R300FKEA RCWE0603R330FKEA RCWE0603R360FKEA RCWE0603R390FKEA RCWE0603R430FKEA RCWE0603R470FKEA RCWE0603R510FKEA RCWE0603R560FKEA RCWE0603R620FKEA RCWE0603R680FKEA RCWE0603R750FKEA RCWE0603R820FKEA RCWE0603R910FKEA RCWE0805R220FKEA RCWE0805R240FKEA RCWE0805R270FKEA RCWE0805R300FKEA RCWE0805R330FKEA RCWE0805R360FKEA RCWE0805R430FKEA RCWE0805R470FKEA RCWE0805R510FKEA RCWE0805R560FKEA RCWE0805R620FKEA RCWE0805R680FKEA RCWE0805R820FKEA RCWE0805R910FKEA RCWE1206R220FKEA RCWE1206R240FKEA RCWE1206R270FKEA RCWE1206R300FKEA RCWE1206R360FKEA RCWE1206R390FKEA RCWE1206R430FKEA RCWE1206R470FKEA RCWE1206R510FKEA RCWE1206R560FKEA RCWE1206R620FKEA RCWE1206R680FKEA RCWE1206R750FKEA RCWE1206R820FKEA RCWE1206R910FKEA RCWE1210R220FKEA RCWE1210R240FKEA RCWE1210R270FKEA RCWE1210R300FKEA RCWE1210R330FKEA RCWE1210R360FKEA RCWE1210R390FKEA RCWE1210R430FKEA RCWE1210R470FKEA RCWE1210R510FKEA RCWE1210R560FKEA RCWE1210R620FKEA RCWE1210R680FKEA RCWE1210R750FKEA RCWE1210R820FKEA RCWE1210R910FKEA RCWE2010R510FKEA RCWE2010R560FKEA RCWE2010R620FKEA RCWE2010R680FKEA RCWE2010R750FKEA RCWE2010R820FKEA RCWE2010R910FKEA RCWE2512R510FKEA