SURFACE MOUNT LED LAMP STANDARD BRIGHT 0603 (0.8 mm Height) QTLP600C QTLP600C-2 HER QTLP600C-3 Yellow QTLP600C-4 Green QTLP600C-7 AlGaAs Red QTLP600C-B Blue PACKAGE DIMENSIONS 0.071 (1.8) 0.055 (1.4) 0.035 (0.9) 0.028 (0.7) TOP 0.047 (1.2) 0.031 (0.8) 0.012 (0.3) SIDE 0.039 (1.0) POLARITY MARK (See Note 2) BOTTOM + for -2, -3, -4 and -B - + for -7 APPLICATIONS POLARITY • Keypad backlighting NOTE: 1. Dimensions for all drawings are in inches (mm). • Push-button backlighting 2. Cathode for -2, -3, -4 and B. Anode for -7. • LCD backlighting DESCRIPTION These surface mount chip LEDs are designed to fit industry standard footprint. Small size, low profile and wide viewing angle make these LEDs ideal choices for backlighting applications and panel illumination. FEATURES • Miniature footprint - 1.6(L) X 0.8(W) X 0.8(H) mm • Wide viewing angle of 100° • Water clear optics • Moisture-proof packaging • Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel © 2003 Fairchild Semiconductor Corporation Page 1 of 6 9/3/03

SURFACE MOUNT LED LAMP STANDARD BRIGHT 0603 (0.8 mm Height) QTLP600C QTLP600C-2 HER QTLP600C-3 Yellow QTLP600C-4 Green QTLP600C-7 AlGaAs Red QTLP600C-B Blue ABSOLUTE MAXIMUM RATINGS (T =25°C Unless otherwise specified) A QTLP600C Parameter Symbol Units -2 -3 -4 -7 -B Continuous Forward Current IF 30 30 30 30 30 mA Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) IFM 160 160 160 180 100 mA Reverse Voltage (IR = 10 µA) VR 5 5 5 5 5 V Power Dissipation PD 84 84 84 72 135 mW Operating Temperature TOPR -40 to +85 °C Storage Temperature TSTG -40 to +90 °C Lead Soldering Time TSOL 260 for 5 sec °C ELECTRICAL / OPTICAL CHARACTERISTICS (T =25°C) A QTLP600C Part Number Symbol Condition -2 -3 -4 -7 -B Luminous Intensity (mcd) Minimum 5 5 9 10 15 I I = 20mA V F Typical 9 9 18 20 20 Forward Voltage (V) Maximum 2.8 2.8 2.8 2.4 4.5 V I = 20mA F F Typical 2.0 2.0 2.1 1.9 3.8 Wavelength (nm) Peak λP 635 585 565 660 430 I = 20mA Dominant λD 630 590 570 645 465 F Spectral Line Half Width (nm) ∆λ 45 35 30 20 65 IF = 20mA Viewing Angle (°) 2Θ1/2 100 100 100 100 100 IF = 20mA © 2003 Fairchild Semiconductor Corporation Page 2 of 6 9/3/03

SURFACE MOUNT LED LAMP STANDARD BRIGHT 0603 (0.8 mm Height) QTLP600C QTLP600C-2 HER QTLP600C-3 Yellow QTLP600C-4 Green QTLP600C-7 AlGaAs Red QTLP600C-B Blue TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 90 2.0 80 Y T I - FORWARD CURRENT (mA) F 45673210000000 ARlEGDaAs HER GYREELLEONW BLUE RELATIVE LUMNOUS INTENSI(NORMALIZED AT 20 mA) 110...055 HYGEERARLRElEGLEDOaNAWs BLUE 0 0.0 1.0 2.0 3.0 4.0 5.0 0 5 10 15 20 25 30 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength HER BLUE GREEN YELLOW AlGaAs RED 1.0 Y T SI N E T N E I 0.5 V ATI L E R 0 300 350 400 450 500 550 600 650 700 750 WAVELENGTH (nm) Fig.5 Maximum Forward Current vs. Ambient Temperature 50 A) Fig.4 Radiation Diagram m 40 T ( N -20˚-10˚ 0˚ 10˚ 20˚ RE -30˚ 30˚ R 30 U -40˚ 40˚ C D -50˚ 50˚ R A 20 W -60˚ 60˚ R O -70˚ 70˚ - FF 10 -80˚ 80˚ I -90˚ 90˚ 0 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 0 20 40 60 80 100 750 REL. LUMINOUS INTENSITY (%) TA - AMBIENT TEMPERATURE (˚C) © 2003 Fairchild Semiconductor Corporation Page 3 of 6 9/3/03

SURFACE MOUNT LED LAMP STANDARD BRIGHT 0603 (0.8 mm Height) QTLP600C QTLP600C-2 HER QTLP600C-3 Yellow QTLP600C-4 Green QTLP600C-7 AlGaAs Red QTLP600C-B Blue RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.033 (0.85) 0.031 (0.80) 0.031 (0.80) 0.039 (1.00) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX © 2003 Fairchild Semiconductor Corporation Page 4 of 6 9/3/03

SURFACE MOUNT LED LAMP STANDARD BRIGHT 0603 (0.8 mm Height) QTLP600C QTLP600C-2 HER QTLP600C-3 Yellow QTLP600C-4 Green QTLP600C-7 AlGaAs Red QTLP600C-B Blue TAPE AND REEL DIMENSIONS +1.5 8.4 -0.0 +0.5 11.0 -0.0 ± 0.5 2.5 5 ±1801 ±2.00. Ø 6 Ø 5 ±0. 0 5 2. Ø12.75+0-.02.50 Progressive direction 5 2.0±0.05 4.0 Ø1.55.±05 0.23±0.1 7 1. 1 0. ± 5 9 0.0 1. ± 0 3.5 8. 4.0 0.9 0.9 Dimensional tolerance is ± 0.1mm unless otherwise specified for -2, -3, -4, -B and -7 Angle: ± 0.5 Polarity Unit: mm © 2003 Fairchild Semiconductor Corporation Page 5 of 6 9/3/03

SURFACE MOUNT LED LAMP STANDARD BRIGHT 0603 (0.8 mm Height) QTLP600C QTLP600C-2 HER QTLP600C-3 Yellow QTLP600C-4 Green QTLP600C-7 AlGaAs Red QTLP600C-B Blue DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support which, (a) are intended for surgical implant into the body, or device or system whose failure to perform can be (b) support or sustain life, and (c) whose failure to perform reasonably expected to cause the failure of the life support when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness. provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2003 Fairchild Semiconductor Corporation Page 6 of 6 9/3/03

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: E verlight: QTLP600C4TR QTLP600C3TR QTLP600C7TR QTLP600CBTR QTLP600C2TR