SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation >1500V isolation (380Vrms continuous) DC Basic insulation (1.4mm creepage/ clearance) and functional available Operating frequency: 50kHz and up Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C5 Primary Leakage2 DCR DCR Package Size Part 3,4 Turns Pri-Sec MAX1 Inductance Inductance Primary Secondary (L x W x H) Number Ratio Isolation V*μsec (μH MIN) (μH MAX) (Ω MAX) (Ω MAX) (mm MAX) Functional Insulation PE-68386NL 1:1 1500 Vdc 9.7 785 0.46 0.60 0.60 8.6 x 6.7 x 2.5 P0926NL 1:1:1 1500 Vdc 23.8 300 0.50 2.00 2.00 8.0 x 6.6 x 5.3 P0544NL 1:1:1 1500 Vdc 45.1 3300 0.80 1.25 1.25 9.0 x 8.6 x 7.6 PA0264NL 1:1:1 1000 Vrms 12.7 1140 0.65 0.75 0.75 8.6 x 6.7 x 3.6 PA1323NL 1:1 1500 Vrms 21.7 600 2.0 1.25 1.25 9.5 x 7.1 x 5.3 Basic Insulation (1.4mm creepage and clearance between Primary and Secondary) PA0173NL 1:1:1 1500 Vrms 17.2 980 0.75 0.62 0.88 11.8 x 8.8 x 4.0 PA0185NL 1:1 1500 Vrms 17.2 980 0.75 0.88 0.62 11.8 x 8.8 x 4.0 PA0184NL 1:1 1500 Vrms 27.2 1200 0.50 0.91 0.91 9.0 x 8.6 x 7.6 PA0297NL 2:1:1 1500 Vrms 27.2 1200 0.60 0.91 0.46 9.0 x 8.6 x 7.6 PA2777NL 1:1 1500 Vrms 9.3 335.2 0.36 0.70 0.70 7.1 x 6.1 x 5.5 PA0510NL 2.5:1:1 1500 Vrms 27.2 1200 0.68 0.91 0.380 9.0 x 8.6 x 7.6 PA3493NL 1.25:1 1650 Vrms 23 656 1.3 1.03 0.85 10.9 x 9.7 x 2.7 Notes: 1. The Maximum volt-μsec rating limits the peak flux density to 2200 Gauss when 4. The “NL” suffix indicates an RoHS-compliant part number. used in a unipolar drive application. For bi-polar drive applications, a maximum 5. The temperature of the component (ambient plus temperature rise) must be within the volt-sec of two times this rating is acceptable (ie: 2* (volt*μsec rating) = (voltage stated operating temperature range. applied to the primary) * dutycycle / Frequency = V * alpha / Freq_Hz = V * μsec 6. Continuous isolation voltage confirmed by 125°C/1000hrs accelerated aging with the bias 2. Leakage inductance is measured at primary terminals with all secondaries shorted. voltage applied between primary and secondary windings 3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard tape and reel specification EIA481. 113 power.pulseelectronics.com SPM2007 (07/17) http://www.power.pulseelectronics.com/contact

SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals Schematics PE-68386NL 1 6 3 4 Weight .............................0.28 grams Tape & Reel .........................1500/reel Tube ......................................60/tube Inches Dimension: mm SUGGESTED PAD LAYOUT Unless otherwise specified, all tolerances are ± .010 0,25 PA0264NL NL Weight .............................0.28 grams Tape & Reel .........................1500/reel Tube ......................................60/tube Inches Dimension: mm .010 Unless otherwise specified, all tolerances are ± 0,25 P0926NL NL Weight .............................0.48 grams Tape & Reel .........................1000/reel Tube ......................................80/tube Dimension: Inches mm .010 Unless otherwise specified, all tolerances are ± 0,25 power.pulseelectronics.com SPM2007 (07/17) http://www.power.pulseelectronics.com/contact

SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals Schematics (continued) P0544NL, PA0297, PA0510, PA0184NL Weight .............................0.60 grams Tape & Reel ............................40/reel Tube ......................................50/tube Inches Dimension: mm .010 Unless otherwise specified, all tolerances are ± 0,25 * for PA0184 the pads for pins 3 and 6 in the suggested pad layout should not be used in the layout PA0173, PA0185 Weight .............................0.48 grams Tape & Reel ..........................900/reel Tube .......................................60/tube Inches Dimension: mm .010 Unless otherwise specified, all tolerances are ± 0,25 114 power.pulseelectronics.com SPM2007 (07/17) http://www.power.pulseelectronics.com/contact

SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals Schematics (continued) PA3493NL (cid:3)(cid:28)(cid:17)(cid:28)(cid:20)(cid:3)mm (cid:3)(cid:20)(cid:19)(cid:17)(cid:28)(cid:21)m(cid:3)(cid:3)(cid:3)m(cid:3)(cid:3)(cid:3)(cid:48)(cid:36)(cid:59)(cid:3) (cid:3)(cid:26)(cid:17)(cid:22)(cid:26)m(cid:3)m _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 _ _ 1 _ _ _ _ 1 6 _ _ (cid:3)(cid:22)(cid:17)(cid:27)(cid:20)m(cid:3)m _ _ _ _ _ _ (cid:3)(cid:28)(cid:17)(cid:25)(cid:24)m(cid:3)(cid:3)(cid:3)m(cid:3)(cid:3)(cid:3)(cid:48)(cid:36)(cid:59)(cid:3) (cid:3)(cid:26)(cid:17)(cid:25)(cid:21)m(cid:3)m (cid:3)(cid:28)(cid:17)(cid:25)(cid:24)(cid:3)mm (cid:3)(cid:24)(cid:17)(cid:24)(cid:28)(cid:3)mm _ _ _ _ _ _ 3 4 DATE CODE _ _ _ _ 3 CTRY OF MFG 4 _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ Weight .............................0.31 grams Tape & Reel .........................1250/reel SUGGESTED FOOTPRINT Tube ......................................50/tube Dimension:mm Unless otherwise specified, all tolerances are ±0,25 (cid:3)(cid:21)(cid:17)(cid:25)(cid:26)m(cid:3)(cid:3)(cid:3)m(cid:3)(cid:3)(cid:3)(cid:48)(cid:36)(cid:59)(cid:3) (cid:19)(cid:17)(cid:20) (cid:23)(cid:3)(cid:54)(cid:56)(cid:53)(cid:41)(cid:36)(cid:38)(cid:40)(cid:54) PA2777NL 6.3 6.3mm MAX 5.9mm MAX 8X 0.508mm 8X 0.76 8X 1.52 8X 0.89mm 7.4mm MAX .15 4.45 6.22 Weight .............................0.32 grams 3X 1.27mm 4.06±.25mm 0.127 3X 1.27 Tape & Reel ..........................850/reel Tube ......................................120/tube BOTTOM VIEW SUGGESTED LAND PATTERN TOP VIEW Dimension:mm FINAL OUTLINE Unless otherwise specified, all tolerances are ±0,25 115 power.pulseelectronics.com SPM2007 (07/17) http://www.power.pulseelectronics.com/contact

SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals Schematics (continued) PA1323NL 1 6 3 4 Weight ...............................0.4 grams Tape & Reel ..........................700/reel Tube .....................................225/tube 7.11mm MAX Dimension:mm 5.33mm MAX Unless otherwise specified, all tolerances are ±0,25 0.127 1.27mm .609X.254 1.27mm (4X)2.54mm REF 5.08mm 2.54mm 9.52mm MAX 9.52mm 5.08mm REF power.pulseelectronics.com SPM2007 (07/17) http://www.power.pulseelectronics.com/contact

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: P ulse: PE-68386 PE-68386T P0544 PA0264T P0926 PA0297T PA0297 PA0184T PA0173T P0926NLT PA0184NLT PE-68386NLT PA0173NLT PA0264NLT P0926NL P0544NLT PE-68386NL P0544NL PA0185NLT P0926T PA0297NL PA0264NL PA0173NL PA0297NLT PA0184NL PA3493NLT