Surface Mount LVPECL Clock Oscillator Model Pxxx Series Description: Features: The Connor Winfield Pxxx Series are • 5.0 x7.0mm Surface Mount Package 2111 Comprehensive Drive 5.0x7.0mm Surface Mount, LVPECL, Fixed • 2.5V or 3.3V Operation Frequency Crystal Controlled Oscillator • LVPECL Differential Outputs Aurora, Illinois 60505 (XO) designed for applications requiring • Frequency Stabilities Available: Phone: 630-851-4722 tight frequency stability, wide temperature 1314 +/-20ppm,+/-25ppm, +/-50ppm, +/-100ppm Fax: 630-851-5040 roarn 3g.e3 Va nsdu plopwly jvitoteltra. g Oe,p tehrea tPinxgx xa tS 2e.r5ieVs 155.52MPH12Z3 • T e0m top e7r0a°tCu,r e-4 R0a tnog 8e5s° CA,v 0a itlaob 8le5:° C, -20 to 70°C provides an LVPECL Differential Outputs • Low Jitter <1pS RMS www.conwin.com with enable / disable function. The surface • Tri-State Enable/Disable on Pad 1 or 2 mount package is designed for high- • Tape and Reel Packaging density mounting and is optimum for mass • RoHS Compliant / Lead Free production. Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 5.0 Vdc Input Voltage (Vc) -0.5 - Vcc + 0.5 Vdc Operating Specifications Parameter Minimum Nominal Maximum Units Notes Output Frequency (Fo) 25 - 312.5 MHz Total Frequency Tolerance (See Ordering Information for full part number) Model Px4x -20 - 20 ppm 1 Model Px1x -25 - 25 ppm 1 Model Px2x -50 - 50 ppm 1 Model Px3x -100 - 100 ppm 1 Operating Temperature Range Model P1xx 0 - 70 °C Model P2xx -40 - 85 °C 2 Model P3xx 0 - 85 °C Model P4xx -20 - 70 °C Supply Voltage (Vcc) Model Pxx2, Pxx5 2.375 2.5 2.625 Vdc Model Pxx3, Pxx4 3.135 3.3 3.465 Vdc Supply Current (Icc) - 60 90 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter (BW = 12 KHz to 20 MHz) 25 < Fo < 60 MHz - 1.3 2.0 ps RMS 60 < Fo < 80 MHz - 0.80 1.0 ps RMS 80 < Fo < 100 MHz - 0.60 0.80 ps RMS 100 < Fo < 160 MHz - 0.40 0.50 ps RMS 160 < Fo < 200 MHz - 0.30 0.40 ps RMS 200 < Fo < 312.5 MHz - 0.20 0.30 ps RMS SSB Phase Noise @ 10 Hz offset - -60 - dBc/Hz @ 100 Hz offset - -90 - dBc/Hz @ 1 KHz offset - -115 - dBc/Hz @ 10 KHz offset - -140 - dBc/Hz @ 100 KHz offset - -145 - dBc/Hz Start-Up Time - - 2 ms Input Characteristics Parameter Minimum Nominal Maximum Units Notes Enable / Disable Option: Models Pxx2, Pxx3 E/D Pad 1. N/C Pad 2 Models Pxx4, Pxx5 E/D Pad 2. N/C Pad 1 Enable Input Voltage - (High) -(Vih) 70%Vcc - - Vdc 3 Disable Input Voltage - (Low) - (Vil) - - 30%Vcc Vdc 3 Enable Time - - 2 ms Disable Time - - 200 ns Standby Current (When Osc. is disabled) - - 30 uA LVPECL Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load - - 50 - Ohm 4 Bulletin Ec217 Voltage (High) (Vcc = 2.5 V) (Voh) 1.475 - - V (Low) (Vcc = 2.5 V) (Vol) - - 0.880 V Page 1 of 2 Voltage (High) (Vcc = 3.3 V) (Voh) 2.275 - - V Revision 18 (Low) (Vcc = 3.3 V) (Vol) - - 1.680 V Date 07 Aug 2018 Duty Cycle at 50% Level 45 50 55 % 5 Rise / Fall Time: 20% to 80% - 0.5 1.0 ns

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Notes: Package Outline 1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging. Models P242, P243 P244 and P245 are not available above 260 MHz. 2. Models P242, P243 P244 and P245 are not available above 260 MHz. 3. When the oscillator is disabled the outputs are at high impedance. Outputs are enabled with no connection on E/D pad. 0.275 0.055 4. Outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. (7.0mm) (1.4mm) 5. Duty cycle measured at 50% of output voltage swing. 1314 Ordering Information 0.197 P123 (BottomView) P 1 2 3 - 155.52M (5.0mm) 155.52MHZ Output Frequency Type Temperature Frequency Supply Voltage 0.102 Range Stability Frequency Format 0.079 MAX (2.6mm) LVPECL 2 = 2.5 Vdc, E/D Pad 1 -xxx.xM Min (2.0mm) DimensionalTolerance Clock Series 1 = 0 to 70°C 4 = ±20 ppm 3 = 3.3 Vdc, E/D Pad 1 -xxx.xxxxxxM Max +/-0.008(+/-0.2mm) 5x7 mm 2 = -40 to 85°C 1 = ±25 ppm 4 = 3.3 Vdc, E/D Pad 2 *Amount of numbers 3 = 0 to 85°C 2 = ±50 ppm 5 = 2.5 Vdc, E/D Pad 2 after the decimal Suggested Pad Layout 4 = -20 to 70°C 3 = ±100 ppm point. M = MHz 0.200 Example: Part Number (5.08mm) C 0.100 P123-155.52M = LVPECL Output, Bypass (2.54mm) 0 to 70, +/-50ppm, 3.3Vdc, E/D Pad 1, Output Frequency 155.52MHz Ground 0.079 Attention: Models P242, P243, P244 and P245 are not available above 260 MHz. (2.00mm) 0.165 TopView (4.20mm) Package Characteristics 1 Package Hermetically sealed ceramic package and metal cover Keep Ground AOreuat (10.8.007m0m) Environmental Characteristics Pad Connections Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Models: Pxx2, Pxx3 Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. 1: Enable / Disable Soldering Process; RoHS compliant lead free. See soldering profile on page 2. 2 N/C 3: Ground 4: Output Q Enable / Disable Function 5: Complementary Output Q Function: Output 6: Supply Voltage (Vcc) Low: Disabled (High Impedance) Models Pxx4, Pxx5 High or Open: Enabled 1: N/C 2 Enable / Disable 3: Ground Test Circuit 4: Output Q 5: Complementary Output Q 6: Supply Voltage (Vcc) R3 Output Waveform DutyCycle 0.1uF 10nF 65 4 R4 Q 80% 1 23 R1 50% OE or 20% N/C Q R2 Vcc R1/R3 R2/R4 tr tf Vcc=Vcc2 2.5V 250Ohms 62.5Ohms Solder Profile 3.3V 130Ohms 82Ohms Temperature 260°C 260°C Tape and Reel Dimensions 220°C 180°C 150°C 120°C 0 10s UpTtyopi1c2a0ls 60Tytopic9a0ls MeetsIPC/JEDECJ-STD-020C Bulletin EC217 Page 2 of 2 Revision 18 Date 07 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.