Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines Data Sheet 11 r EMIFIL (Capacitor type) Single Circuit Type for Signal Lines NFM21C Series (0805 Size) c Dimensions c Insertion Loss Characteristics (Main Items) 0.3±0.2 0 (50Ω - 50Ω) 0.85±0.1 20 NFNMF2M1C21CC2C232R221RH13H3 B) 20..60(±±20)0..22 1.25±0.1 Insertion Loss (d 6400 NNFFMMN2F211MCCN2CC1F1C4M07C2212R1R2C111HCHR31310H13U1H3 NFM21CC470U1H3 (1) (3) 80 NFM21CC220U1H3 +0.20.2–0.1 (2) : Ele(cintr omdme) 1000.1 1 F1re0quency (MHz1)00 1000 6000 c Equivalent Circuit c Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 Input (Output) Output (Input) (1) (3) No polarity. GND (2) c Rated Value (p: packaging code) Operating Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Temperature Range NFM21CC220U1H3p 22pF ±20% 700mA 50Vdc 1000M ohm -55 to +125°C NFM21CC470U1H3p 47pF ±20% 700mA 50Vdc 1000M ohm -55 to +125°C NFM21CC101U1H3p 100pF ±20% 700mA 50Vdc 1000M ohm -55 to +125°C NFM21CC221R1H3p 220pF ±20% 700mA 50Vdc 1000M ohm -55 to +125°C NFM21CC471R1H3p 470pF ±20% 1000mA 50Vdc 1000M ohm -55 to +125°C NFM21CC102R1H3p 1000pF ±20% 1000mA 50Vdc 1000M ohm -55 to +125°C NFM21CC222R1H3p 2200pF ±20% 1000mA 50Vdc 1000M ohm -55 to +125°C NFM21CC223R1H3p 22000pF ±20% 2000mA 50Vdc 1000M ohm -55 to +125°C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 2013.11.11 http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines Data Sheet 22 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Notice Do not use products beyond the rated current and Solderability of Tin plating termination chip might be rated voltage as this may create excessive heat deteriorated when low temperature soldering profi le and deteriorate the insulation resistance. where peak solder temperature is below the Tin melting point is used. Please confi rm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 2013.11.11 http://www.murata.com/