M-Series M-Series CIRCUIT BREAKER The M-Series is a low cost, miniature, hydraulic-magnetic circuit breaker which features a compact, space saving design, front panel snap-in mounting and a vertically mounted parallel pole configuration. It features various styling options to maximize your design flexibility. Choices include rocker, illuminated rocker, paddle and baton style handle actuators, push-to-reset and push-pull pushbutton actuators, as well as Visi-Rocker two color actuators. Our exclusive Rockerguard bezel helps prevent inadvertent actuation and a wiping contact mechanism assures long-term reliability. The M-Series circuit breakers are available with 1, 2 or parallel poles, 0.02 to 50 amp ratings, and 125 and 250VAC or 80VDC versions. With over 16 different time delays, 5 terminal styles, a variety of panel hardware, various colors, and legend imprinting, it assures suitability for most any application design. Resources: Configure a Complete Part Download CAD & Sales Drawing Product Highlights: Typical Applications: • Parallel pole configuration fits in one rack unit • Telecom/Datacom • MIL-PRF-55629 • Transportation • MIL STD 202 compliant • Marine • MIL-PRF-39019F ingress protection • Generators • Sealed toggle actuator • Power Supplies • Compact design • Medical Equipment Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: sales@carlingtech.com www.carlingtech.com Application Support: team2@carlingtech.com Phone: 860.793.9281 Fax: 860.793.9231

2 | M-Series Circuit Breaker – General Specifications Electrical Mechanical Maximum Voltage 125/250 VAC 50/60 Hz, 80 VDC Endurance 10,000 ON-OFF operations @ 6 (See Rating Tables.) per minute with rated Current and Current Ratings Standard current coils: 0.100, Voltage. 0.250, 0.500, 0.750, 1.00 thru 15.0 Trip Free All M-Series Circuit Breakers will in 1 amp increments, 18.0, 20.0, trip on overload, even when 25.0, 30.0. Other ratings available actuator is forcibly held in the ON - see Ordering Scheme. position. Auxiliary Switch Rating SPDT; 7A 250VAC, 7A (Res) Trip Indication The actuator moves positively 28VDC, 4A (Ind.) 28VDC, 0.25A to the OFF position when an 80VDC (Res) (silver contacts), overload causes the circuit 0.1A 125VAC (gold contacts). breaker to trip. Insulation Resistance Minimum of 100 Megohms at 500 VDC. Physical Dielectric Strength UL, CSA 1500V, 50/60 Hz for one Number of Poles 1 or 2 minute between all electrically Internal Circuit Configs. Series with or without isolated terminals. M-Series Auxiliary Switch. Circuit Breakers comply with the Switch Only with or without 8mm spacing and 3750 V 50/60Hz Auxiliary Switch. dielectric requirements from Weight Approximately 30 grams/pole hazardous voltage to operator (Approximately 1.07 ounces/pole) accessible surfaces, per Standard Colors See Ordering Scheme Publications IEC 380, 435, 950, EN 60950 and VDE 0805. Environmental Resistance, Impedance Values from Line to Load Terminal Designed in accordance with requirements of specification - based on Series Trip Circuit MIL PRF-55629 & MIL-STD-202G as follows: Breaker. Shock Withstands 100 Gs, 6ms, sawtooth while carrying rated current per RESISTANCE PER POLE VALUES from Line to Load Terminals Method 213, Cond. I. Instantaneous (Values Based on Series Trip Circuit Breaker) curves tested at 80% of rated CURRENT TOLERANCE current. (AMPS) (%) Vibration Withstands 0.060” excursion 0.10 - 20.0 ± 25 from 10-55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 20.1 - 50.0 ± 35 204C, Test Condition A. Instantaneous curves tested at 80% of rated current. Moisture Resistance Method 106D, i.e., ten 24-hour cycles @ + 25°C to +65°C, 80- 98% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C). Pulse Tolerance Curves Operating Temperature -40° C to +85° C Chemical Resistance Only the outside surfaces of the case and the handles may be cleaned with detergents or alcohol. Organic (hydrocarbon based) solvents are not recommended because they attack plastics. Caution should be taken when solvents are used to clean and remove flux from terminals. Lubricants should not be introduced into the handle/ bushing openings *Manufacturer reserves the right to change product specification without prior notice. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

3 | M-Series Circuit Breaker – General Specifications Electrical Tables Table A: Lists UL Recognized and CSA Accepted configurations & performance capabilities as a Component Supplementary Protector. M-SERIES TABLE A: COMPONENT SUPPLEMENTARY PROTECTORS Voltage Current Rating Short Circuit Capacity (Amps) Application Codes Circuit Poles UL / CSA Configuration Max Frequency Phase Full Load General Breaking With Backup Without Backup Rating Amps Purpose Amps UL CSA Fuse Fuse 0.02 - 15 --- 1 --- 1000 TC1, 2, OL1, U1 TC1, 2, OL1, U1 32 DC --- --- 15.1 - 25 1 --- 1000 TC1, 2, OL0, U1 TC1, 2, OL0, U1 50 2 DC --- 0.02 - 7.5 --- 1 --- 1000 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 2 --- 1000 TC1, 2, OL1, U1 TC1, 2, OL1, U1 65 DC --- --- 15.1 - 25 2 --- 1000 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 1 --- 1000 TC1, 2, OL1, U1 TC1, 2, OL1, U1 65 1,2 DC --- --- 15.1 - 30 1 --- 1000 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 2 5000 3 --- TC1, 2, OL1, C1 TC1, 2, OL1, C1 65 DC --- --- 15.1 - 25 2 5000 3 --- TC1, 2, OL0, C1 TC1, 2, OL0, C1 Series 80 1 DC --- 0.02 - 15 --- 1 --- 600 TC1, 2, OL1, U1 TC1, 2, OL1, U1 --- 15.1 - 30 1 --- 600 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 1 --- 1000 TC1, 2, OL1, U1 TC1, 2, OL1, U1 125 50 / 60 1 --- 15.1 - 30 1 --- 1000 TC1, 2, OL0, U1 TC1, 2, OL0, U1 1 - 30 --- 1 --- 360 TC1, OL1, U2 TC3, OL1, U3 250 2 50 / 60 1 0.02 - 12 --- 1 --- 1000 TC1, 2, OL1, U1 TC1, 2, OL1, U1 250 50 / 60 1 --- 12.1 - 18 1 1000 4 --- TC1, 2, OL0, C1 TC1, 2, OL0, C1 0.02 - 15 --- 2 --- 1000 TC1, 2, OL1, U1 TC1, 2, OL1, U1 250 50 / 60 1 --- 15.1 - 30 2 --- 1000 TC1, 2, OL0, U1 TC1, 2, OL0, U1 1 - 30 --- 2 --- 360 TC1, OL1, U2 TC3, OL1, U3 Notes: 1 Polarity Sensitive 2 Available only with Special Catalog Number. Consult Factory. 3 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 30 Amps maximum 4 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 60 Amps maximum Table B: Lists UL Recognized,CSA Accepted and TUV and VDE Certified configurations and performance capabilities as a Component Supplementary Protector. M-SERIES TABLE B: COMPONENT SUPPLEMENTARY PROTECTORS Voltage Current Rating Short Circuit Capacity (Amps) Application Codes UL / CSA VDE / TUV Circuit General Poles Configuration Max Frequency Phase Full Load Purpose Breaking With Without With Without Rating Amps Backup Backup Backup Backup UL CSA Amps Fuse Fuse Fuse Fuse 0.02 - 15 --- 1 --- 1000 3000 500 TC1, 2, OL1, U1 TC1, 2, OL1, U1 32 DC --- --- 15.1 - 25 1 --- 1000 3000 500 TC1, 2, OL0, U1 TC1, 2, OL0, U1 50 2 DC --- 0.02 - 7.5 --- 1 --- 1000 3000 500 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 2 --- 1000 3000 500 TC1, 2, OL1, U1 TC1, 2, OL1, U1 65 DC --- --- 15.1 - 25 2 --- 1000 3000 500 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 2 5000 --- 3000 500 TC1, 2, OL1, C1 TC1, 2, OL1, C1 65 3 DC --- --- 15.1 - 30 2 5000 --- 3000 500 TC1, 2, OL0, C1 TC1, 2, OL0, C1 Series 0.02 - 15 --- 1 --- 600 4 --- 500 TC1, 2, OL1, U1 TC1, 2, OL1, U1 80 1 DC --- --- 15.1 - 30 1 --- 600 4 --- 500 TC1, 2, OL0, U1 TC1, 2, OL0, U1 0.02 - 15 --- 1 --- 1000 3000 500 TC1, 2, OL1, U1 TC1, 2, OL1, U1 125 50 / 60 1 1 - 15 --- 1 --- 360 3000 500 TC1, OL1, U2 TC3, OL1, U3 0.02 - 12 --- 1 --- 1000 3000 500 TC1, 2, OL1, U1 TC1, 2, OL1, U1 250 50 / 60 1 0.02 - 20 --- 2 --- 1000 3000 500 TC1, 2, OL0, U1 TC1, 2, OL0, U1 1 - 12 --- 1 --- 360 3000 500 TC1, OL1, U2 TC3, OL1, U3 Notes: 1 Polarity Sensitive 2 Available only with Special Catalog Number. Consult Factory. 3 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 30 Amps maximum 4 TUV only, not VDE 5 Requires backup protection with a thermal magnetic circuit breaker rated 32 amps and having a Type C trip characteristic per EN60898/DIN VDE 0641 (C32A) for ratings greater than 15amps, and a thermal magnetic circuit breaker rated 16 amps and having a Type C trip characteristic per EN60898/DIN VDE 0641 (C16A) for ratings 15 amps and less Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

4 | M-Series Circuit Breaker – General Specifications Electrical Tables Table C: Lists UL489A Listed and TUV Certified configurations and performance capabilities for use in Communications Equipment. M-SERIES TABLE C: UL489A Listed (Communications Equipment - Polarity Sensitive) Voltage Interrupting Capacity (Amps) Current Rating Circuit Poles Without Backup Fuse Configuration RMatainxg Frequency GenerAaml Ppusrpose Breaking UL489A TUV 80 DC 0.02 - 30 1 600 --- Series 65 1 DC 0.02 - 30 1 1000 --- 80 DC 0.10 - 30 1 600 600 Notes: 1. Available only with Special Catalog Number Table D: Lists UL489A Listed configurations and performance capabilities for use in Communications Equipment. M-SERIES TABLE D: Parallel Pole Construction UL489A Listed (Communications Equipment - Polarity Sensitive) Voltage Interrupting Capacity (Amps) Current Rating Circuit Poles Configuration RMatainxg Frequency GenerAaml Ppusrpose Breaking WithouUt LB4a8c9kAup Fuse 80 DC 31 - 50 2 600 Series 65 1 DC 31 - 50 2 1000 Notes: 1. Available only with Special Catalog Number Agency Certifications UL Recognized CSA Accepted Component Supplementary UL Standard 1077 Component Recognition Program Protector (Class 3215 30, File as Protectors, Supplementary 047848 0 000) (Guide CCN/QVNU2, File E75596) CSA Standard C22.2 No. 235 UL Listed VDE Certified EN60934, VDE 0642 under File UL Standard 489A Communications Equipment 10537 (Guide CCN/DITT, File E189195) TUV Certified EN60934, under License No. R9671109 Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

5 | M-Series Circuit Breaker - Parallel Pole Rocker – Ordering Scheme M E 2 P D2 650 5 A 1 2 B T 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Terminal IlluminationActuator Legend Bezel Agency & Delay Rating Color & Color Approval Legend 1 SERIES 7 TERMINAL M A Push in Stud 5 10-32 Screw (Bus Type) 2 ACTUATOR Single Color Two Color Visi Single Color Translucent 8 ILLUMINATION A Angled D Indicate ON F Angled Non-Illuminated B Flat E Indicate OFF G Flat A Non-Illuminated 9 ACTUATOR COLOR & LEGEND Actuator Visi 1 Legend 1 White Black 2 Black White 3 Red White 4 Green White 5 Blue White 6 Yellow Black 7 Gray Black 8 Orange Black 10 LEGEND 2 ON - OFF Vertical 3 POLES 3 ON - OFF Horizontal 2 Two 6 Dual Vertical 7 Dual Horizontal 4 CIRCUIT/AUXILIARY SWITCH 2 P Series Trip Current (Parallel Pole) with Auxiliary Switch, Silver Contacts 11 BEZEL COLOR Q Series Trip Current (Parallel Pole) .110 x 0.20 Q.C A White without Rockerguard with Auxiliary Switch, Gold Contacts B Black without Rockerguard R Series Trip Current (Parallel Pole) .110 x 0.20 Q.C G Gray without Rockerguard 1 White with Rockerguard 2 Black with Rockerguard 5 FREQUENCY & TIME DELAY 7 Gray with Rockerguard D2 DC Short D4 DC Medium 12 AGENCY APPROVAL T UL 489A Listed 6 CURRENT RATING (AMPERES) CODE AMPERES 631 31.000 635 35.000 640 40.000 645 45.000 650 50.000 Notes: 1 Reminder of Rocker same color as Visi 2 Aux Switch only available with screw terminals Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

6 | M-Series Circuit Breaker - Parallel Pole Handle / Pushbutton – Ordering Scheme M M 2 P D2 650 5 1 B B B T 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Terminal Actuator Front Legend Brushing Agency & Delay Rating Color Panel Plate/ Color Approval Hardware Marking 1 SERIES 9 FRONT PANEL HARDWARE M Handle A No outer Panel Hardware B Knurled Nut, Bright Nickel 2 ACTUATOR C Knurled Nut, Bright Nickel with Locking Ring M Paddle D Knurled Nut, Black T Push-Pull E Knurled Nut, Black with Locking Ring F Panel Dress, Bright Nickel G Panel Dress, Bright Nickel with Locking Ring 3 POLES H Panel Dress, Black 2 Two J Panel Dress, Black with Locking Ring Push Button 4 CIRCUIT/AUXILIARY SWITCH 1 1 No outer Panel Hardware P Series Trip Current (Parallel Pole) 2 Knurled Nut, Bright Nickel with Auxiliary Switch, Silver Contacts Q Series Trip Current (Parallel Pole) .110 x 0.20 Q.C with Auxiliary Switch, Gold Contacts 10 LEGEND PLATE / BUTTON MARKING R Series Trip Current (Parallel Pole) .110 x 0.20 Q.C Handle Actuator Legend Plate B ON - OFF Vertical C ON - OFF Horizontal 5 FREQUENCY & TIME DELAY Push-Pull Actuator Legend Plate D2 DC Short 2 Rated Amps Horizontal D4 DC Medium 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up 6 CURRENT RATING (AMPERES) CODE AMPERES 11 BUSHING COLOR 631 31.000 B Black 635 35.000 640 40.000 12 AGENCY APPROVAL 645 45.000 T UL 489A Listed 650 50.000 Notes: 7 TERMINAL 1 Aux Switch only available with screw terminals A Push in Stud 5 10-32 Screw (Bus Type) 8 ACTUATOR COLOR & LEGEND Handle Push Button 1 White A White 2 Black B Black 3 Red C Red 4 Green D Green 5 Blue E Blue 6 Yellow F Yellow 7 Gray G Gray 8 Orange H Orange Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

7 | M-Series Circuit Breaker - Parallel Pole – Dimensional Specifications Dimensional Specifications: in. [mm] LET REVISIONS DATE RELEASEDPER A 5-10-12 PARALLEL POLE TERMINAL OPTIONS ECO16976 PUSH-IN STUD 10-32 SCREW W/ BUS BAR .912[23.16] .652[16.56] 1.125[28.58] 1.000[25.4] .154[3.91] .838[21.29] .393[9.97] 1.000[25.4] .100[2.54] .750[19.05] ROCKERACTUATORDETAIL INDICATE"ON"(VISI-ON) .370[9.40]MAX. 1.394[35.41] 1.5±3.0020[38.8[±6.50]8] 1.30±.4020[33.1[±2.5]08] LINE OFF 1.375[34.93] .970[24.64] 1.560[39.62] 1.125[28.58] ON LOAD .400[10.16] .100[2.54] .625[15.88] INDICATE"OFF"(VISI-OFF) ROCKERGUARDCONFIGURATION &SINGLECOLOR ±.020 ±.508 ±.020 ±.508 .675[17.14] .305[7.75] NOTES: LOAD LOAD 1.ALLDIMENSIONSAREININCHES[MILLIMETERS]. ON ON ±.020 ±.508 2.TOLERANCE ±.010[.25]UNLESS OTHERWISESPECIFIED. 1.050[26.67] 3.DIMENSIONSAPPLYTOBOTHROCKER STYLES. OFF LINE OFF LINE 4.I-O,ON-OFFORDUALLEGENDSAVAILABLEFOR VERTICALORHORIZONTALMOUNTING. 5.NOTICETHATCIRCUITBREAKERLINEANDLOADTERMINAL PANELCUT- OUT DETAIL (ROCKER) ORIENTATIONONINDICATE"OFF"ISOPPOSITETHATOF DOUBLEPOLE INDICATE"ON". PANEL DIM.A THICKNESS +-..000005 +-..0103 DIM.A .062[1.57] 1.385[35.18] TITLE M SERIES PARALLEL POLE .093[2.36] 1.420[36.07] FORM & FIT DIAGRAMS ±.005 ±.13 .125[3.18] 1.460[37.08] 1.139[33.76] DR BY APVDBY DWGNO REV ME CLA-8121 Notes: 5/10/12 SHT 1 OF 3 A 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.010 [.25] unless otherwise specified. 3 Dimensions apply to both rocker styles. 4 I-o, on-off or dual legends available for vertical or horizontal mounting. 5 Notice that circuit breaker line and load terminal orientation on indicate “off” is opposite that of indicate “on”. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

8 | M-Series Circuit Breaker - Parallel Pole – Dimensional Specifications LET REVISIONS DATE LET REVISIONS DATE Dimensional Specifications: in. [mm] A RELEASED PER 5-10-12 A RELEASED PER 5-10-12 ECO 16976 ECO 16976 PADDLE ACTUATOR STYLE PUSH-PULL ACTUATOR STYLE 1.395 1.484 1/2-32THD. 3/8"8-32THD. 12° ON ACTUATORCOLOR OFF FLAT VISIBLEINOFF 12° POSITIONONLY ±.030 ±.76 .500[12.70]OFF(SHOWN) .400[10.16] ±.030FL±A.76T .470[11.94] .28±.003[07.1±.176]ON ±.030 ±.76 .500[12.70] MOUNTING DETAILS PANEL HARDWARE MOUNTING DETAILS .500+-..00D010I0A[Ø12+-...0720500] .50+-0..0001D00IA[Ø1+-2..02.07500] +.010 +.25 .[1429.455] .[20.9489] ±.002±.05 . -3.07050 [-9.0.053] .162[4.11] DIA +.010 +.25 PUSH-PULL, ±.005[±.13] -.000 -.000 PUSHTORESET HEXNUT .355[9.02] .125DIA[Ø3.18] .2±2.0202[5[±..60540]] .544[13.82] WITHLOCKINGRING WITHOUTLOCKINGRING .156 .625[15.87]DIA [3.56] .534 .078 [13.56] [1.98] LEGEND PLATES SNAP-INBUSHING .025[.64] .340[8.64] .632DIA[Ø16.05] .435 [11.05]DIA PANELDRESSNUT 0N 1.025[26.04] ON OFF BUTTON MARKING ORIENTATION 0FF LEGEND B C LINE CODE: 20 LINE 20 20 PANEL HARDWARE LINE .625[15.88] .680DIA[Ø17.27] MARKING 2 3 4 CODE: .125[3.18] .180[4.57] NOTES: NOTES: .110QC AUXILIARY SWITCH1 T.EARLMLINADLISM ENSIONS ARE IN INCHES [MILL1IM. AELTLEDRISM].ENSIONS ARE IN INCHES [MILLIMETERS]. 2. TOLERANCE ±.010 [.25] UNLESS OTHER2.WTIOSELESRPAENCCIFEIE±D.0.10 [.25] UNLESS OTHERWISE SPECIFIED. 3. DIMENSIONS APPLY TO BOTH ROCKER3.SDTIYMLEENSS.IONS APPLY TO BOTH ROCKER STYLES. HEXNUT PANELDRESSNUT 4. I-O, ON-OFF OR DUAL LEGENDS AVAIL4A.BI-LOE,FOONR-OFF OR DUAL LEGENDS AVAILABLE FOR VERTICALOR HORIZONTAL MOUNTING. VERTICALOR HORIZONTAL MOUNTING. .680DIA[Ø17.27] .125[3.18] .105[2.67] .342[8.69] 5. NOTICE THAT CIRCUIT BREAKER LINE5A.NNDOTLOICAEDTTHEARTMCIINRACLUIT BREAKER LINE AND LOAD TERMINAL ORIENTATION ON INDICATE "OFF" IS OPPOORSIEITNETTAHTIAOTNOOFN INDICATE "OFF" IS OPPOSITE THAT OF INDICATE "ON". INDICATE "ON". .031[.79] .683DIA[Ø17.27] TITLE M SERIES PARALLEL POTITLLEE M SERIES PARALLEL POLE KNURLEDNUT LOCKINGRING FORM & FIT DIAGRAMS FORM & FIT DIAGRAMS Notes: DR BY APVDBY DWGNO DR BY REV APVDBY DWGNO REV 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.010 [.25] unless otherwise specified. ME CLA-8121 ME CLA-8121 34 DI-oim, oenn-soioffn osr adpupally l etog ebnodths raovcakielarb slety fleosr .vertical or horizontal mounting. 5/10/12 SHT 2 OF 3 5/10/1A2 SHT 3 OF 3 A 5 Notice that circuit breaker line and load terminal orientation on indicate “off” is opposite that of indicate “on”. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

9 | M-Series Circuit Breaker - Rocker UL Recognized – Ordering Scheme M G 2 B 34 620 1 H C 6 7 C 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Rating Terminal IlluminationActuator Legend Bezel Color Agency & Delay Color Approval 1 SERIES 6 CURRENT RATING (AMPERES) M CODE AMPERES 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 2 ACTUATOR 1 030 0.030 235 0.350 425 2.500 711 11.500 Non-Illuminated Two Color illuminated 035 0.035 240 0.400 527 2.750 612 12.000 single color Visi-Rocker single color 040 0.040 245 0.450 430 3.000 712 12.500 A Angled D Indicate ON F Angled 045 0.045 250 0.500 435 3.500 613 13.000 B Flat E Indicate OFF G Flat 050 0.050 255 0.550 440 4.000 614 14.000 055 0.055 260 0.600 445 4.500 615 15.000 060 0.060 265 0.650 450 5.000 616 16.000 065 0.065 270 0.700 455 5.500 617 17.000 070 0.070 275 0.750 460 6.000 618 18.000 075 0.075 280 0.800 465 6.500 620 20.000 080 0.080 285 0.850 470 7.000 622 22.000 085 0.085 290 0.900 475 7.500 624 24.000 090 0.090 295 0.950 480 8.000 625 25.000 090 0.095 410 1.000 485 8.500 63012 30.000 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 3 POLES 220 0.200 517 1.750 610 10.000 1 One 2 Two 7 TERMINAL 4 CIRCUIT 2 1 Push-On 0.250 Tab (Q.C.) A 14 Push-In Stud without Auxiliary Switch 2 10 Screw 8-32 with Upturned Lugs P 15 Printed Circuit Board A Switch Only (no coil), Maintained Contacts 3 10 Screw 8-32 (Bus Type) B Series Trip (Current) with Auxiliary Switch, Silver Contacts Terminal Type: M Series Trip (Current) Aux Switch .110 QC x .020 QC 8 ROCKER ILLUMINATION P 3 Switch Only, Maintained Contacts .060 Dia, Round Solder Turret Non-illuminated A Q 3,4 Switch Only, Maintained Contacts .058 Dia, Round Q.C. Neon 5 Neon Green Glow 8 R 3,16 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. without resistor, 120VAC/250VAC B C S 3 Series Trip (Current) .060 Dia, Round Solder Turret LED 7, 8 Red Green Amber T 3,4 Series Trip (Current) .058 Dia, Round Q.C. without resistor D G K U 3,16 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. with resistor, 4-8 VDC E H L with Auxiliary Switch, Gold Contacts with resistor, 9-16 VDC F J M 2 3,4 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 3 3,16 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 4 3,4 Series Trip (Current) .058 Dia, Round Q.C. 9 ACTUATOR & LEGEND COLOR 5 3,16 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. Solid Color Actuator Legend 9 Series Trip (Current) Aux Switch .110 QC x .020 QC 1 White Black 2 Black White 3 Red White 5 FREQUENCY & DELAY 4 Green White 03 DC 50/60Hz, Switch Only 32 DC, 50/60Hz Short 5 Blue White 10 DC Instantaneous 34 DC, 50/60Hz Medium 6 Yellow Black 12 DC Short 62 50/60Hz Short, High-inrush 7 Gray Black 14 DC Medium 64 50/60Hz Medium, High-inrush 8 Orange Black 20 50/60Hz Instantaneous 72 DC, Short, High-inrush Visi-Rocker 6 Visi & Legend (remainder of rocker same color as bezel) 22 50/60Hz Short 74 DC,Medium, High-inrush 1 White 24 50/60Hz Medium 92 DC, 50/60Hz Short, High-inrush 2 Black 30 DC, 50/60Hz Instantaneous 94 DC, 50/60Hz Medium, High-inrush 3 Red 4 Green 5 Blue 6 Yellow 7 Gray 8 Orange Illuminated 8 Actuator Legend A Clear White B Red Transparent White Notes: C Green Transparent White 1 One actuator is located in the center of each multi-pole breaker. D Amber Transparent White 2 For Switch Only circuits, select Current Coil Rating from the above chart: E Smoke Gray Transparent White 3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip & Switch Only F White Translucent Black circuits, & is not available in single pole illuminated breakers, or Back Connected Screw or Push-in Stud terminals. 4 M(tina tpelsa tweidth). AMP .058” diameter pin receptacles: 60983-1 (gold plated) & 60983-2 10 LEGEND 11 4 I - O Vertical 5 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 1 No Legend 5 I - O Horizontal 150K, 1/4 WATT, external resistors must be supplied by customer. 2 ON - OFF Vertical 6 Dual Vertical 6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel. 7 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker 3 ON - OFF Horizontal 7 Dual Horizontal actuator with electrical characteristics: 100 millicandela at 20mA; Maximum power dissipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage = 2.1V at 20mA; Typical reverse current = 100uA at 3V. Customer supplies the proper 11 BEZEL COLOR / STYLE 9 external resistor limiting current to these values. Color without Rockerguard with Rockerguard 8 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or match color of LED or neon lamp. White A 1 9 Other colors available. Consult factory. Black B 2 10 TUV 20A, VDE 15A. UL Recognized and CSA Accepted to 30 amps. Gray G 7 Screw Terminals or Push-in Stud recommended above 20 amps. 11 TUV or VDE Certified must have I-O or Dual Legends. Legend required on Visi-Rocker breakers. 12 30 amp rating not available with delay’s 30, 32, 34, 92 or 94. 12 AGENCY APPROVAL 10 13 Screw Terminals are VDE certified only with use of ring terminal attached to wire. C UL Recognized & CSA Accepted 14 Terminal code A available with circuit codes A & B only. D VDE Certified, UL Recognized & CSA Accepted 15 Printed circuit board available with UL recognized approval only. 16 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. E TUV Certified, UL Recognized & CSA Accepted Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

10 | M-Series Circuit Breaker - Rocker UL489A/UL Recognized – Ordering Scheme M A 1 B 14 620 1 A 1 6 2 J 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Rating Terminal IlluminationActuator Legend Bezel Color Agency & Delay Color Approval 1 SERIES 7 TERMINAL M 1 Push-On 0.250 Tab (Q.C.) A 11 Push-In Stud 2 Screw 8-32 with Upturned Lugs P 12 Printed Circuit Board 3 Screw 8-32 (Bus Type) 2 ACTUATOR 1 Non-Illuminated Two Color illuminated single color Visi-Rocker single color 8 ROCKER ILLUMINATION A Angled D Indicate ON F Angled Non-illuminated A B Flat E Indicate OFF G Flat Neon 4 Neon Green Glow 8 without resistor, 120VAC/250VAC B C LED 7, 8 Red Green Amber without resistor D G K with resistor, 4-8 VDC E H L with resistor, 9-16 VDC F J M 9 ACTUATOR & LEGEND COLOR Solid Color Actuator Legend 1 White Black 3 POLES 2 Black White 1 One 3 Red White 4 Green White 4 CIRCUIT 2 5 Blue White 6 Yellow Black without Auxiliary Switch 7 Gray Black B Series Trip (Current) 8 Orange Black with Auxiliary Switch, Silver Contacts Terminal Type: Visi-Rocker 6 Visi & Legend (remainder of rocker same color as bezel) M Series Trip (Current) Aux Switch .110 QC x .020 QC S 3 Series Trip (Current) .060 Dia, Round Solder Turret 1 White T 3,4 Series Trip (Current) .058 Dia, Round Q.C. 2 Black U 3,16 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 3 Red 4 Green with Auxiliary Switch, Gold Contacts 4 3,4 Series Trip (Current) .058 Dia, Round Q.C. 5 Blue 5 3,16 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 6 Yellow 7 Gray 9 Series Trip (Current) Aux Switch .110 QC x .020 QC 8 Orange Illuminated 7 Actuator Legend A Clear White 5 FREQUENCY & DELAY 14 DC Medium B Red Transparent White 10 DC Instantaneous 72 DC, Short, High-inrush C Green Transparent White 12 DC Short 74 DC,Medium, High-inrush D Amber Transparent White E Smoke Gray Transparent White F White Translucent Black 6 CURRENT RATING (AMPERES) CODE AMPERES 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 10 LEGEND 10 030 0.030 235 0.350 425 2.500 711 11.500 1 No Legend (Single Color or Illuminated Rocker Options Only) 035 0.035 240 0.400 527 2.750 612 12.000 2 ON - OFF Vertical 040 0.040 245 0.450 430 3.000 712 12.500 3 ON - OFF Horizontal 045 0.045 250 0.500 435 3.500 613 13.000 4 I - O Vertical 050 0.050 255 0.550 440 4.000 614 14.000 5 I - O Horizontal 055 0.055 260 0.600 445 4.500 615 15.000 6 Dual Vertical 060 0.060 265 0.650 450 5.000 616 16.000 7 Dual Horizontal 065 0.065 270 0.700 455 5.500 617 17.000 070 0.070 275 0.750 460 6.000 618 18.000 007850 00..007850 228805 00..880500 446750 67..500000 662202 2202..000000 11 BEZEL COLOR / STYLE 8 085 0.085 290 0.900 475 7.500 624 24.000 Color without Rockerguard with Rockerguard 090 0.090 295 0.950 480 8.000 625 25.000 White A 1 090 0.095 410 1.000 485 8.500 630 30.000 Black B 2 210 0.100 512 1.250 490 9.000 Gray G 7 215 0.150 415 1.500 495 9.500 220 0.200 517 1.750 610 10.000 12 AGENCY APPROVAL 9 Notes: J UL489A Listed & TUV Certified 1 One actuator is located in the center of each multi-pole breaker. M UL Recognized & CSA Accepted 2 One Auxiliary Switch is supplied per breaker. Auxiliary Switch option limited to Series Trip & Switch Only circuits, and is not available in single pole illuminated breakers, or with Back N TUV Certified, UL Recognized & CSA Accepted Connected Screw or Push-in Stud terminals. T UL489A Listed 3 Mates with AMP .058” diameter pin receptacles: 60983-1 (gold plated) & 60983-1 (tin plated). 4 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 150K, 1/4 WATT, external resistors must be supplied by customer. 5 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker actuator with electrical characteristics as follows: 100 millicandela at 20mA; Maximum power dissipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage = 2.1V at 20mA; Typical reverse current = 100uA at 3V. Customer supplies the proper external resistor limiting current to these values. 6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel. 7 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or match color of LED or neon lamp. 8 Other colors available. Consult factory. 9 UL Recognized, CSA Accepted, UL489A Listed, and TUV Certified to 30 amps. Screw Terminals recommended above 20 amps. 10 UL489A Listed must have ON-OFF or Dual legends. TUV Certified approvals must have I - O or Dual legends. 11 Terminal code A available with circuit codes A & B only. 12 Printed circuit board available with UL recognized approval only. 13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

11 | M-Series Circuit Breaker - Rocker – Circuit & Terminal Diagrams Circuit & Terminal Diagrams: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 3 Schematic shown represents current trip circuit. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

12 | M-Series Circuit Breaker - Rocker – Dimensional Specifications Dimensional Specifications: in. [mm] Notes: 1 Dimensions apply to all variations shown. Notice that circuit breaker line & load terminal orientation on indicate OFF is opposite of indicate ON. 2 I-O, ON-OFF or dual legends available for vertical or horizontal mounting. For pole orientation with horizontal legend, rotate front view clockwise 90°. 3 All dimensions are in inches [millimeters]. 4 Tolerance ± 0.20 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

13 | M-Series Circuit Breaker - Rocker – Supplementary Diagrams Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

14 | M-Series Circuit Breaker - Handle/Pushbutton UL Recognized – Ordering Scheme M M 1 B 34 260 1 1 B B C B 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Terminal Actuator Front Panel Legend Bushing Agency & Delay Rating Color Hardware Plate Color Approval 1 SERIES 6 CURRENT RATING (AMPERES) M CODE AMPERES 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 2 ACTUATOR 1 030 0.030 235 0.350 425 2.500 711 11.500 035 0.035 240 0.400 527 2.750 612 12.000 Handle 040 0.040 245 0.450 430 3.000 712 12.500 M Paddle 045 0.045 250 0.500 435 3.500 613 13.000 N Baton 050 0.050 255 0.550 440 4.000 614 14.000 055 0.055 260 0.600 445 4.500 615 15.000 Push Button 060 0.060 265 0.650 450 5.000 616 16.000 T Push-Pull 065 0.065 270 0.700 455 5.500 617 17.000 U Push To Reset 070 0.070 275 0.750 460 6.000 618 18.000 075 0.075 280 0.800 465 6.500 620 20.000 Push Button with 080 0.080 285 0.850 470 7.000 622 22.000 Snap-In Mounting 085 0.085 290 0.900 475 7.500 624 24.000 V Push-Pull W Push To Reset 090 0.090 295 0.950 480 8.000 625 25.000 090 0.095 410 1.000 485 8.500 630 30.000 9 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 3 POLES 220 0.200 517 1.750 610 10.000 1 One 2 Two 7 TERMINAL 4 CIRCUIT 2 1 Push-On 0.250 Tab (Q.C.) A 11 Push-In Stud without Auxiliary Switch 2 10 Screw 8-32 with Upturned Lugs P 12 Printed Circuit Board A Switch Only (no coil), Maintained Contacts 3 10 Screw 8-32 (Bus Type) B Series Trip (Current) with Auxiliary Switch, Silver Contacts Terminal Type: M Series Trip (Current) Aux Switch .110 QC x .020 QC 8 ACTUATOR COLOR & LEGEND 5 P 3 Switch Only, Maintained Contacts .060 Dia, Round Solder Turret Gloss Handle Push-Button Actuator Color Q 3,4 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 1 A White R 3,13 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 2 B Black S 3 Series Trip (Current) .060 Dia, Round Solder Turret 3 C Red T 3,4 Series Trip (Current) .058 Dia, Round Q.C. 4 D Green U 3,13 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 5 E Blue 6 F Yellow with Auxiliary Switch, Gold Contacts 8 H Orange 2 3,4 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 3 3,13 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 4 3,4 Series Trip (Current) .058 Dia, Round Q.C. 9 FRONT PANEL HARDWARE 6 5 3,13 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. Handle Push-Button 9 Series Trip (Current) Aux Switch .110 QC x .020 QC No outer Panel Hardware A 1 Knurled Nut Bright nickel B 2 5 FREQUENCY & DELAY Bright nickel with locking ring C 03 DC 50/60Hz, Switch Only 32 DC, 50/60Hz Short Black D 10 DC Instantaneous 34 DC, 50/60Hz Medium Black with locking ring E 12 DC Short 62 50/60Hz Short, High-inrush Panel Dress Nut 14 DC Medium 64 50/60Hz Medium, High-inrush Bright nickel F 20 50/60Hz Instantaneous 72 DC, Short,High-inrush Bright nickel with locking ring G 22 50/60Hz Short 74 DC,Medium, High-inrush Black H 24 50/60Hz Medium 92 DC, 50/60Hz Short, High-inrush Black with locking ring J 30 DC, 50/60Hz Instantaneous 94 DC, 50/60Hz Medium, High-inrush Full Load Amp Tungsten Lamp 10 LEGEND PLATE / BUTTON MARKING Voltage Rating General Purpose Amps Rating Handle Actuator Legend Plate (Actuator Styles M & N) RMatainxg Frequency Phase AMmapxs RCauCtrihnreogno Cts Coeod iel AMmapxs CCohiol Roastein Cgu Crroednet AMmapxs RCauCtrihnreogno Cts Coeod iel BrPeoalkeisn g ABC NOOoNN L-- eOOgFFeFFnd VH Peorlratiiztceoa nl tal 32 DC - 15 615 25 625 - - 1 D I - O Vertical E I - O Horizontal 50 DC - - - 7.5 Consult Factory - - 1 Push-Pull Actuator Button Cap (Actuator Styles T & V) 65 DC 1 15 615 25 625 - - 2 1 No Marking 125 50/60Hz 1 15 615 25 625 15 615 1 2 Rated Amps Horizontal 250 50/60Hz 1 12 612 - - - 1 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up 250 50/60Hz 1 15 615 25 625 - - 2 Push-to-Reset Actuator Button (Actuator Styles U & W) 1 No Marking Notes: 1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W 2 lSimwiittecdh tOo nsliyn gcilrec upiotsle a brere naokte arsv aoinlalyb.le with Push-To-Reset actuators. For Switch Only circuits, 11 BUSHING COLOR 7 select Current Coil Rating from the above chart: B Black 3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. Not available with back connect screw or push-in stud terminals. 12 AGENCY APPROVAL 8 4 Mates with AMP .058” diameter pin receptacles including 60983-1 (gold plated) C UL Recognized & CSA Accepted and 60983-2 (tin plated). D VDE Certified, UL Recognized & CSA Accepted 5 Actuator color is only visible in the OFF position on Push-Pull actuators. E TUV Certified, UL Recognized & CSA Accepted 6 All units except snap-in mounting have one hex nut installed on bushing for use behind the panel. 7 Other colors available. Consult factory. 8 TUV 20A, VDE 15A. UL Recognized and CSA Accepted to 30 amps. Screw Terminals or Push-in Stud recommended above 20 amps. 9 30 amp rating not available with delay’s 30, 32, 34, 92 or 94. 10 Screw Terminals are VDE certified only with use of ring terminal attached to wire. 11 Terminal code A available with circuit codes A & B only. 12 Printed circuit board available with UL recognized approval only. 13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

15 | M-Series Circuit Breaker - Handle/Pushbutton UL489A/UL Recognized – Ordering Scheme M M 1 B 14 620 1 1 B B B J 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Terminal Actuator Front Panel Legend Bushing Agency & Delay Rating Color Hardware Plate Color Approval 1 SERIES 7 TERMINAL 4 M 1 Push-On 0.250 Tab (Q.C.) A 10 Push-In Stud 2 Screw 8-32 with Upturned Lugs P 11 Printed Circuit Board 3 Screw 8-32 (Bus Type) 2 ACTUATOR 1 Handle 8 ACTUATOR COLOR & LEGEND 5 M Paddle Gloss Handle Push-Button Actuator Color N Baton 1 A White 2 B Black Push Button 3 C Red T Push-Pull U 8 Push To Reset 4 D Green 5 E Blue 6 F Yellow Push Button with 8 H Orange Snap-In Mounting V Push-Pull W 8 Push To Reset 9 FRONT PANEL HARDWARE 6 Handle Push-Button 3 POLES No outer Panel Hardware A 1 1 One Knurled Nut Bright nickel B 2 Bright nickel with locking ring C 4 CIRCUIT Black D without Auxiliary Switch Black with locking ring E B Series Trip (Current) Panel Dress Nut with Auxiliary Switch, Silver Contacts Terminal Type: Bright nickel F Bright nickel with locking ring G M Series Trip (Current) Aux Switch .110 QC x .020 QC S 3 Series Trip (Current) .060 Dia, Round Solder Turret Black H Black with locking ring J T 3,4 Series Trip (Current) .058 Dia, Round Q.C. U 3,13 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. with Auxiliary Switch, Gold Contacts 10 LEGEND PLATE / BUTTON MARKING 4 2,3 Series Trip (Current) .058 Dia, Round Q.C. Handle Actuator Legend Plate (Actuator Styles M & N) 5 3,12 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. A No Legend Plate 9 Series Trip (Current) Aux Switch .110 QC x .020 QC B ON - OFF Vertical C ON - OFF Horizontal D I - O Vertical 5 FREQUENCY & DELAY E I - O Horizontal 10 DC Instantaneous 72 DC, Short,High-inrush Push-Pull Actuator Button Cap (Actuator Styles T & V) 12 DC Short 74 DC,Medium, High-inrush 1 8 No Marking 14 DC Medium 2 Rated Amps Horizontal 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up 6 CURRENT RATING (AMPERES) Push-to-Reset Actuator Button (Actuator Styles U & W) C0O2D0E A0M.0PE2R0E S 225 0.250 420 2.000 710 10.500 1 8 No Marking 025 0.025 230 0.300 522 2.250 611 11.000 030 0.030 235 0.350 425 2.500 711 11.500 035 0.035 240 0.400 527 2.750 612 12.000 11 BUSHING COLOR 7 040 0.040 245 0.450 430 3.000 712 12.500 B Black 045 0.045 250 0.500 435 3.500 613 13.000 050 0.050 255 0.550 440 4.000 614 14.000 055 0.055 260 0.600 445 4.500 615 15.000 12 AGENCY APPROVAL 9 060 0.060 265 0.650 450 5.000 616 16.000 J UL489A Listed, TUV Certified 065 0.065 270 0.700 455 5.500 617 17.000 M UL Recognized, CSA Accepted 070 0.070 275 0.750 460 6.000 618 18.000 N UL Recognized, TUV Certified 075 0.075 280 0.800 465 6.500 620 20.000 T UL489A Listed 080 0.080 285 0.850 470 7.000 622 22.000 085 0.085 290 0.900 475 7.500 624 24.000 090 0.090 295 0.950 480 8.000 625 25.000 090 0.095 410 1.000 485 8.500 630 30.000 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 220 0.200 517 1.750 610 10.000 1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W limited to single pole breakers only. 2 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. Not available with Back Connected Screw or Push-in Stud terminals. 3 Mates with AMP .058” diameter pin receptacles including 60983-1 (gold plated) and 60983-3 (tin plated). 4 Screw terminals or Push-in Stud recommended above 20 amps. 5 Actuator color is only visible in the OFF position on Push-Pull actuators. 6 All units have one hex nut installed on bushing for use behind the panel. 7 Other colors available. Consult factory. 8 Not available with UL489A Listed breakers. 9 UL Recognized, CSA Accepted and UL Listed to 30 amps. 10 Terminal code A available with circuit codes A & B only. 11 Printed circuit board available with UL recognized approval only. 12 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

16 | M-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams Circuit & Terminal Diagrams: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

17 | M-Series Circuit Breaker - Handle – PC Terminal Diagrams PC Terminal Diagrams: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

18 | M-Series Circuit Breaker - Handle – Dimensional Specifications Dimensional Specifications: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

19 | M-Series Circuit Breaker - Pushbutton – Circuit & Terminal Diagrams Circuit & Terminal Diagrams: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

20 | M-Series Circuit Breaker - Pushbutton – Dimensional Specifications Dimensional Specifications: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ± 0.20 [.51] unless otherwise specified. 3 Available with Push-Pull or Push-to-Reset Actuators Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

21 | M-Series Circuit Breaker - Push-Pull – PC Terminal Diagrams PC Terminal Diagrams: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

22 | M-Series, Circuit Breaker - Time Delay Values , Notes: 1 Delay Curves 12,14, 22, 24, 32, 34, 62, 64, 72, 74, 92, 94: Breakers to hold 100% and must trip at 135% of rated current and greater within the time limit shown in this curve. 2 Delay Curves 10, 20, 30: Breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve. 3 All Curves: Curve data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading. Breakers are mounted in standard wall-mount position. 4 The minimum inrush pulse tolerance handling capability is 12 times the rated current on standard delays and 18 times the rated current on high inrush delays. These values are based on a 60 Hz 1/2 cycle, 8.33 ms pulse. High inrush delays should be specified for applications with high initial surge currents of short duration, such as switching power supplies, highly capacitive loads and transformer loads. Dual Rated AC/DC Instantaneous Short Short D2 Medium Medium D4 Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

23 | Sales Representatives, Distributors & Company Profile Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. CANADA EUROPE USA MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com

Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: sales@carlingtech.com Northern Region Sales Office: nrsm@carlingtech.com Southeast Region Sales Office: sersm@carlingtech.com Midwest Region Sales Office: mrsm@carlingtech.com West Region Sales Office: wrsm@carlingtech.com Latin America Sales Office: larsm@carlingtech.com Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: sales@carlingtech.com.hk Shenzhen, China: shenzhen@carlingtech.com Shanghai, China: shanghai@carlingtech.com Pune, India: india@carlingtech.com Kaohsiung, Taiwan: taiwan@carlingtech.com Yokohama, Japan: japan@carlingtech.com Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: ltd.sales@carlingtech.com Germany: gmbh@carlingtech.com France: sas@carlingtech.com www.carlingtech.com REV_01_2019

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C arling Technologies: MT1-B-14-420-1-A22-B-C