43 www.vishay.com Vishay Spectrol 3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer FEATURES • 0.75 W at 70 °C • Wide ohmic value range (10  to 5 M) • Panel mount available • Multi-finger wiper for better C.R.V. • Tests according to CECC 41000 or IEC 60393-1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESIGN SUPPORT TOOLS click logo to get started Models Available DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") 1 2 3 Ø 0.5 (0.02) Shaft 1.5 (0.06) 0.6 (0.02) 0.6 (0.02) 4.8 (0.19) ± 0.2 Ø 2.5 (0.1) 6.4 (0.25) ± 0.2 4.8 (0.19) ± 0.2 Base level 2.54 (0.1) ± 0.2 (1) T 601 5.21 ± 0.25 7.62 ± 0.25 (0.205 ± 0.010) (0.300 ± 0.010) Internal tooth lock washer 19 (0.748) 1.14 10-32 NF hex nut (0.045) 5.3 (0.2) ± 0.9 (0.035) Ø 2.94 3.15 (0.125) (1) (0.116) Through to std. shaft 7.6 (0.3) 5.1 (0.2) Ø 7.01 ± 0.25 ± 0.2 (1) ± 0.2 (1) (0.276 ± 0.010) Ø 4.83 (10-32 NF) Note (1)To be measured at base level Revision: 31-Aug-2018 1 Document Number: 57026 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

43 www.vishay.com Vishay Spectrol ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 15 turns ± 1 Resistance range 10  to 5 M Standard series E3 1 - 2 - 5 Tolerance Standard ± 10 % Linear 0.75 W at +70 °C 0.75 W N 0.50 Power rating R I E W O P0.25 0 0 20 40 60 70 80 100 125 140 AMBIENT TEMPERATURE IN °C a c Circuit diagram (1) (3) b cw (2) Temperature coefficient See Standard Resistance Element table Limiting element voltage (linear law) 400 V Contact resistance variation 1 % Rn or 1  max. End resistance (typical) 1 % or 2  Dielectric strength (RMS) 1000 V Insulation resistance (500 VDC) 103 M min. MECHANICAL SPECIFICATIONS Mechanical travel 18 turns ± 5 Operating torque (max. Ncm) 3.5 End stop torque Clutch action Net weight (max. g) 1.2 Wiper (actual travel) Positioned at approx. 50 % Terminals Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range -55 °C to +125 °C Climatic category 55/125/4 Sealing Fully sealed - IP67 Revision: 31-Aug-2018 2 Document Number: 57026 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

43 www.vishay.com Vishay Spectrol PERFORMANCES TYPICAL VALUES AND DRIFTS TESTS CONDITIONS RT/RT (%) V1-2/V1-3 (%) OTHER 1000 h at rated power Load life ± 4 % - - 90'/30' - ambient temp. 70 °C Dielectric strength: 1000 V Humidity 4 days ± 3 % - RMS Insulation resistance: > 20 M 5 cycles Rapid temperature change ± 0.5 % ± 2 % - -55 °C to +125 °C 50 g at 11 ms Shock 3 successive shocks ± 2 % ± 2 % - in 3 directions 10 Hz to 55 Hz Vibration 0.75 mm or 10 g ± 2 % ± 2 % - during 6 h Rotational life 200 cycles ± (3 % + 1 ) - Contact res. variation: < 1 % Rn Note • Nothing stated herein shall be construed as a guarantee of quality or durability STANDARD RESISTANCE ELEMENT DATA MARKING LINEAR LAW TYPICAL RSETSAISNTDAANRCDE MAX. MAX. MAX. TCR • Vishay trademark VALUES POWER WORKING WIPER -55 °C • Vishay part number or model, ohmic value code and  AT 70 °C VOLTAGE CUR. +125 °C tolerance code  W V mA ppm/°C • Manufacturing date 10 0.75 2.74 274 • Marking of terminals 1 and/or 3 20 0.75 3.87 194 50 0.75 6.12 122 100 0.75 8.66 87 PACKAGING 200 0.75 12.2 61 500 0.75 19.4 39 • In box of 200 pieces code B40 (BO200) 1K 0.75 27.4 27 On request: 2K 0.75 38.7 19 • In box of 100 pieces code B30 (BO100) 5K 0.75 61.2 12 ± 100 • In tube of 25 pieces code T10 (TU25) 10K 0.75 86.6 8.7 20K 0.75 122 6.1 50K 0.75 194 3.9 100K 0.75 274 2.7 200K 0.75 387 1.9 500K 0.32 400 0.8 1M 0.16 400 0.4 2M 0.08 400 0.2 4M 0.03 400 0.08 Revision: 31-Aug-2018 3 Document Number: 57026 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

43 www.vishay.com Vishay Spectrol ORDERING INFORMATION (Part Number) M 4 3 P 1 0 3 K B 4 0 T 6 0 1 SPECIAL Model STYLE OHMIC VALUE TOLERANCE PACKAGING NUMBER M43 P From K = 10 % B40 = box 200 pieces (If applicable) 100  to 5 M On request: Given by 103 = 10 k B30 = box 100 pieces Vishay T10 = tube 25 pieces for custom design DESCRIPTION (for information only) 43 P 10K 10 % T601 BO100 e3 MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 31-Aug-2018 4 Document Number: 57026 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: M43P100KB40 M43P101KB40 M43P102KB40 M43P103KB40 M43P104KB40 M43P105KB40 M43P200KB40 M43P201KB40 M43P202KB40 M43P203KB40 M43P204KB40 M43P205KB40 M43P252KB40 M43P253KB40 M43P254KB40 M43P500KB40 M43P501KB40 M43P502KB40 M43P503KB40 M43P504KB40 009-43PG