Available at Digi-Key M100F / V High Precision TCXO / VCTCXO Oscillators Description: 2111 Comprehensive Drive The Connor-Winfield M100, M170, Features: Aurora, Illinois 60505 and M200 models offer precise Models: M100, M170, M200 Series frequency stability and excellent • Package: 5 x 3.2mm, 8 Pads Phone: 630-851-4722 phase noise in a 5x3.2mm • Frequencies Available: 10, 12.288, 12.8, Fax: 630-851-5040 package. 19.2,19.44, 20.0, 24.576, or 40.0 MHz www.conwin.com Through the use of analog • 3.3 Vdc Operation temperature compensation, these TCXO's and • Output Logic: LVCMOS VCTCXO's are capable of holding sub 100 ppb and • Frequency Stability: 200ppb stabilities over the commercial or industrial M100: ±100 ppb, 0 to 70°C temperature ranges. M170: ±100 ppb -20 to 70°C M200: ±200 ppb, -40 to 85°C Applications: • Fixed Frequency - TCXO • Optional Control Voltage - VCTCXO Basestation Communications • Low Jitter <0.50 ps RMS DSL / ADSL Femtocell IP Timing LTE • Low Phase Noise Precision GPS SONET / SDH • Tape and Reel Packaging WiMAX / WiBro WLAN • RoHS Compliant / Lead Free Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -40 - 85 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vc) -0.5 - Vcc + 0.5 Vdc Ordering Information M 100 F - 012.8M Type / Package Frequency Stability and TCXO or VCTCXO Output Frequency Temperature Range TCXO / VCTCXO F = TCXO Frequency Format Series 100 = ±100 ppb, 0 to 70°C V = VCTCXO -xxx.xM Min 170 = ±100 ppb, -20 to 70°C -xxx.xxxxxxM Max M = 5.0x3.2 mm 200 = ±200 ppb, -40 to 85°C *Amount of numbers after the decimal point. Supply Voltage = 3.3 Vdc M = MHz Output Logic = LVCMOS Example: Part Number M100F-012.8M = 5x3.2mm package, ±100 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, TCXO, 12.8 MHz Bulletin Tx382 M100V-019.2M = 5x3.2mm package, ±100 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, VCTCXO, 19.2 MHz Page 1 of 4 M200F-010.0M = 5x3.2mm package, ±200 ppb, -40 to 85°C, 3.3 Vdc, LVCMOS Output, TCXO, 10 MHz Revision 04 M200V-020.0M = 5x3.2mm package, ±200 ppb, -40 to 85°C, 3.3 Vdc, LVCMOS Output, VCTCXO, 20 MHz Date 09 Oct 2019

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Operating Specifications Parameter Minimum Nominal Maximum Units Notes Output Frequency (Fo) 10.0, 12.288, 12.8, 19.2, 19.44, 20.0, 24.576, 40.0 MHz Frequency Calibration @ 25 °C -1.0 - 1.0 ppm 1 Frequency Stability (See Ordering Information for full part number) Model M100x and M170x -100 - 100 ppb 2 Model M200x -200 - 200 ppb 2 Frequency vs. Load Stability -0.20 - 0.20 ppm ±5% Frequency vs. Voltage Stability -0.20 - 0.20 ppm ±5% Static Temperature Hysteresis - - 0.40 ppm 3 Freq. shift after reflow soldering -1.0 - 1.0 ppm 4 Long Term Stability -1.0 - 1.0 ppm 5 Aging per Life (20 Years) -3.0 - 3.0 ppm per Day -40 - 40 ppb per Second - 4.63E-13 - pps Operating Temperature Range (See Ordering Information for full part number) Model M100x 0 - 70 °C Model M170x -20 - 70 °C Model M200x -40 - 85 °C Supply Voltage (Vcc) 3.135 3.30 3.465 Vdc Supply Current (Icc) - - 3.3 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter - 0.5 1.0 ps RMS 6 SSB Phase Noise for Fo=12.8 MHz @ 10 Hz offset - -90 - dBc/Hz @ 100 Hz offset - -120 - dBc/Hz @ 1 KHz offset - -140 - dBc/Hz @ 10 KHz offset - -153 - dBc/Hz @ 100 KHz offset - -154 - dBc/Hz @ 1 MHz offset - -154 - dBc/Hz SSB Phase Noise for Fo=19.2MHz @ 10 Hz offset - -90 - dBc/Hz @ 100 Hz offset - -115 - dBc/Hz @ 1 KHz offset - -135 - dBc/Hz @ 10 KHz offset - -151 - dBc/Hz @ 100 KHz offset - -154 - dBc/Hz @ 1 MHz offset - -155 - dBc/Hz Start-Up Time - - 10 ms Control Voltage Input Characteristics Parameter Minimum Nominal Maximum Units Notes Control Voltage 0.3 1.65 3.0 V Frequency Pullability ±10 - - ppm Control Voltage Slope Positive Slope Monotonic Linearity - - 10 % Input Impedance 100K - - Ohm Modulation Bandwidth (3dB) 10 - - KHz LVCMOS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load (CL) - 15 - pF 7 Voltage (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - 4 8 ns Bulletin Tx382 Page 2 of 4 Revision 04 Date 09 Oct 2019 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Package Characteristics Package Hermetically sealed ceramic package with grounded metal cover Package Terminations: 0.5 to 1.0 um (20 to 40 micro-inches) Gold over minimum of 2.0um (80 micro-inches) Nickel. Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process: RoHS compliant lead free. See soldering profile on page 4. Notes: 1. Initial calibration @ 25°C. ±2°C, for VCTCXO's Vc = 1.65V. Specifications at time of shipment after 48 hours of operation. 2. Frequency stability vs. change in temperature. [±(Fmax-Fmin)/2.Fo]. For VCTCXO's - Vc -= 1.65V 3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C 4. Two consecutive reflows after 1 hour recovery @ 25°C. 5. Frequency drift over 1 year @ 25°C. 6. BW = 12 KHz to Fo/2 7. Attention: To achieve optimal frequency stability, and in some cases to meet the specification stated on this data sheet, it is required that the circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations from the nominal load capacitance will have a graduated effect on the stability of approximately 20 ppb per pF load difference. Suggested Pad Layout Package Outline for Marking (all package outlines) 10.0, 12.8, 19.2, 20.0 MHz Configuration To Output 0.065 0.028 (1.65mm) 0.028 (0.71mm) (30..21m26m) 0.(028.13mMma)x. 0(0.0.1056mTmyp). (0.71mm) (50..01m97m) M602164612.8MHZ (10.2.07P5m(0a0m0.d4.)0111m6m) (10.P0(.007a0.4md7.201m82m)8m) EBAKxOyretepeueaartpn*sasl 5 VTioepw 4 (10.3.055m3(m2)0.4.099m8m) VTioepw D+/i-m0.e0n0s5io(n+a/-l0T.o1l2e7ramnmce): 0(0.0.2008mTmyp). BVoitetowm (10.0.074m2m) Ca0p.1&acuiFtor 8 1 0.050 10nF (1.27mm) 0.050 (1.27mm) To Ground * Do not route any traces in the keep out area. It is Package Outline for Marking recommended the next layer under the keep out 12.288, 19.44, 24.576 MHz Configuration area is to be ground plane. 0.065 (1.65mm) 0.028 (30..21m26m) 0.(028.13mMma)x. 0(0.0.1056mTmyp). (0.71mm) 46HZ (00.4.011m6m) (10.0.074m2m) Pad Connections (50..01m97m) 6021612.8M (10.2.075m0m) (00.7.012m8m) 1: ( a l lV pCTaCcXkOa:g Ceo noturotl lVinoeltasg)e (Vc) M Pad1 Pad8 TCXO: N/C VTioepw D+/i-m0.e0n0s5io(n+a/-l0T.o1l2e7ramnmce): 0(0.0.2008mTmyp). BVoitetowm (10.0.074m2m) 2: Do Not Connect 3: Do Not Connect 4: Ground Package Outline for Marking 5: Output 6: Do Not Connect 40.0 MHz Configuration 7: Do Not Connect 0.065 (1.65mm) 0.028 8: Supply Voltage (Vcc) (30..21m26m) 0.(028.13mMma)x. 0(0.0.1056mTmyp). (0.71mm) 46HZ (00.4.011m6m) (10.0.074m2m) (50..01m97m) 6021612.8M (10.2.075m0m) (00.7.012m8m) M Pad1 Pad8 VTioepw D+/i-m0.e0n0s5io(n+a/-l0T.o1l2e7ramnmce): 0(0.0.2008mTmyp). BVoitetowm (10.0.074m2m) Bulletin Tx382 Page 3 of 4 Revision 04 Date 09 Oct 2019 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Phase Noise Information Test Circuit DNC DNC Vcc Supply Voltage Output 8 7 6 5 0.1uF 10nF 1 4 15pF Bypass Bypass 2 3 TCXO=N/C VCTCXO=Vc DNCDNC DNC=DoNotConnect LVCMOS Output Waveform M100 - M200 Design Recommendations Vcc,shouldhave aarelaarfgoerrceodpupceerd 0R.e01c0o”m(0m.2e5n4dmemd) Vcc 50Ohmtrace 1V/Div inductance. clearance <1”bydesign Connecta0.01uF inductance bypasscapacitor forinternal Solder Profile <fr0o.m1”(t2h.e54pmadm.) 98 7 6 55 copperflood. M100F1145 Buffer Temperature 10.0MHZ 260°C Ground 260°C 10 4 1 2 3 4 shGouroldunhda,ve TopView Ground 220°C TopView alargecopper 180°C areaforreduced inductance. 150°C 120°C 50OhmTrace OSC Without Output Vias Buffer TOPLAYER GROUNDLAYER 0 ....... Upto120s 10s BOTTOMLAYER Typical 60to90s Typical MeetsIPC/JEDECJ-STD-020C Tape and Reel Information Revision History Revision Date Changes 00 10/31/12 Data sheet released 01 09/02/14 Phase Noise Plot and Specifications Update 02 03/25/15 Updated Frequencies & Alternate Package Bulletin Tx382 03 12/06/17 Added 19.44MHz to available frequency list. Page 4 of 4 04 10/09/19 Added package and marking options, and updated tape and reel. Revision 04 Date 09 Oct 2019 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.