图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: LQH32CN150K53L
  • 制造商: Murata
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

LQH32CN150K53L产品简介:

ICGOO电子元器件商城为您提供LQH32CN150K53L由Murata设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 LQH32CN150K53L价格参考¥1.83-¥3.67。MurataLQH32CN150K53L封装/规格:固定值电感器, 15µH 无屏蔽 绕线 电感器 300mA 754 毫欧最大 非标准 。您可以下载LQH32CN150K53L参考资料、Datasheet数据手册功能说明书,资料中有LQH32CN150K53L 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

电感器,线圈,扼流圈

DC电阻(DCR)

580 毫欧

描述

INDUCTOR 15UH 300MA 1210固定电感器 15uH 10%

产品分类

固定值电感器

品牌

Murata Electronics North America

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

固定电感器,Murata Electronics LQH32CN150K53LLQH32C_53

数据手册

点击此处下载产品Datasheet点击此处下载产品Datasheet

产品型号

LQH32CN150K53L

Q最小值

35

不同频率时的Q值

-

产品培训模块

http://www.digikey.cn/PTM/IndividualPTM.page?site=cn&lang=zhs&ptm=5389

产品目录绘图

产品目录页面

点击此处下载产品Datasheet

产品种类

固定电感器

供应商器件封装

1210

其它名称

490-4060-1

包装

剪切带 (CT)

单位重量

45 mg

商标

Murata Electronics

外壳宽度

1.6 mm

外壳长度

3.2 mm

外壳高度

1.8 mm

大小/尺寸

0.126" 长 x 0.098" 宽(3.20mm x 2.50mm)

安装类型

表面贴装

容差

±10%

封装

Reel

封装/外壳

1210(3225 公制)

封装/箱体

1206 (3216 metric)

屏蔽

无屏蔽

工作温度

-40°C ~ 85°C

工厂包装数量

2000

最大直流电流

105 mA

最大直流电阻

580 mOhms

材料-磁芯

铁氧体

标准包装

1

电感

15µH

电流-饱和值

-

端接类型

SMD/SMT

类型

绕线

自谐振频率

23 MHz

频率-测试

1MHz

频率-自谐振

26MHz

额定电流

300mA

高度-安装(最大值)

0.067"(1.70mm)

推荐商品

型号:7445710

品牌:Wurth Electronics Inc.

产品名称:电感器,线圈,扼流圈

获取报价

型号:FIT68-2

品牌:Triad Magnetics

产品名称:电感器,线圈,扼流圈

获取报价

型号:VLF504010MT-1R0N

品牌:TDK Corporation

产品名称:电感器,线圈,扼流圈

获取报价

型号:CDRH8D43NP-4R7NC

品牌:Sumida America Components Inc.

产品名称:电感器,线圈,扼流圈

获取报价

型号:CTX16-15954

品牌:Eaton - Electronics Division

产品名称:电感器,线圈,扼流圈

获取报价

型号:SP1210-333J

品牌:API Delevan Inc.

产品名称:电感器,线圈,扼流圈

获取报价

型号:VLCF5020T-4R7N1R4

品牌:TDK Corporation

产品名称:电感器,线圈,扼流圈

获取报价

型号:ELL-6UH220M

品牌:Panasonic Electronic Components

产品名称:电感器,线圈,扼流圈

获取报价

样品试用

万种样品免费试用

去申请
LQH32CN150K53L 相关产品

NLFC453232T-4R7M-PF

品牌:TDK Corporation

价格:

CLF6045T-220M-H

品牌:TDK Corporation

价格:¥4.36-¥8.52

MLG1608B39NJTD25

品牌:TDK Corporation

价格:

NLV32T-5R6J-EFD

品牌:TDK Corporation

价格:

LQW18ANR22G80D

品牌:Murata Electronics North America

价格:¥0.50-¥1.75

LQP02TN0N6B02D

品牌:Murata Electronics North America

价格:

MLF1608E100JTD25

品牌:TDK Corporation

价格:¥1.71-¥3.41

LQW18AN51NJ00D

品牌:None

价格:¥0.36-¥0.43

PDF Datasheet 数据手册内容提取

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P1/8 CHIP COIL (CHIP INDUCTORS) LQH32CN□□□□53L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQH32CN_53 Series, Chip coil (Chip Inductors). 2. Part Numbering (ex) LQ H 32 C N 1R0 M 5 3 L Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging (L×W) and L:Taping Characteristics 3. Rating ・Operating Temperature Range. -40 to +85°C ・Storage Temperature Range. -40 to +85°C Inductance DC Self ∗Rated Customer MURATA Resonant Resistance Current Part Number Part Number (µH) Tolerance (Ω) Frequency (mA) (MHz min) LQH32CN1R0M53L 1.0 0.060±30% 100 1000 LQH32CN2R2M53L 2.2 0.097±30% 64 790 LQH32CN3R3M53L 3.3 ±20% 0.12 ±30% 50 710 LQH32CN4R7M53L 4.7 0.15 ±30% 43 650 LQH32CN6R8M53L 6.8 0.25 ±30% 32 540 LQH32CN100K53L 10 0.30 ±30% 26 450 LQH32CN150K53L 15 0.58 ±30% 26 300 LQH32CN220K53L 22 0.71 ±30% 19 250 LQH32CN330K53L 33 ±10% 1.1 ±30% 17 200 LQH32CN470K53L 47 1.3 ±30% 15 170 LQH32CN680K53L 68 2.2 ±30% 12 130 LQH32CN101K53L 100 3.5 ±30% 10 100 ∗When applied Rated current to the Products , self temperature rise shall be limited to 20℃ max and Inductance will be within ±10% of initial Inductance value. 4. Testing Conditions <Unless otherwise specified> <In case of doubt> Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20 ± 2°C Humidity : Ordinary Humidity (25 to 85 %(RH)) Humidity : 60 to 70%(RH) Atmospheric Pressure : 86 to 106 kPa 5. Appearance and Dimensions 2.5±0.2 2.5±0.2 5 A 0.1 A ± 5 5 1. 2.5±0.2 A:2.8max. 3.2±0.3 ■Unit Mass (Typical value) 0.045g ※ Nomarking. (in mm) 0.9±0.31.3±0.20.9±0.3 MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P2/8 6.Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent Measuring Frequency: 1MHz 6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter 6.3 Self Resonant S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent Frequency(S.R.F) 7.Mechanical Performance No. Item Specification Test Method 7.1 Shear Test Chip coil shall not be damaged. Substrate: Glass-epoxy substrate Applied Direction : Chip coil F Substrate Force: 10N Hold Duration: 5±1s 7.2 Bending Test Substrate:Glass-epoxy substrate (100×40×1.6mm) Speed of Applying Force: 1mm / s Deflection: 2mm Hold Duration: 30seconds. Pressurejig R340 F Deflection 45 45 Product (in mm) 7.3 Vibration Oscillation Frequency : 10~55~10Hz for 1 minute Total Amplitude: 1.5mm Testing Time: A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) 7.4 Solderability The wetting area of the electrode shall Flux: Ethanol solution of rosin,25(wt)% be at least 90% covered with (Immersed for 5s to 10s) new solder coating. Solder : Sn-3.0Ag-0.5Cu Pre-Heating : 150±10°C / 60 to 90seconds Solder Temperature : 240±5°C Immersion Time : 3±1 s 7.5 Resistance to Appearance:No damage Flux: Ethanol solution of rosin,25(wt)% Soldering Heat Inductance Change: within ±5% (Immersed for 5s to 10s) Solder : Sn-3.0Ag-0.5Cu Pre-Heating: 150±10°C / 60 to 90seconds Solder Temperature: 270±5°C Immersion Time: 10±1 s Then measured after exposure in the room condition for 24±2 hours. MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P3/8 8.Environmental Performance (It shall be soldered on the substrate.) No. Item Specification Test Method 8.1 Heat Resistance Appearance:No damage Temperature: 85±2°C Inductance Change: within ± 5% Time: 1000h (+48h , -0h) DC Resistance Change: within ± 5% Then measured after exposure in the room condition for 24±2 hours. 8.2 Cold Resistance Temperature: -40±2°C Time: 1000h (+48h , -0h) Then measured after exposure in the room condition for 24±2 hours. 8.3 Humidity Temperature: 40±2°C Humidity: 90~95%(RH) Time: 1000h (+48h , -0h) Then measured after exposure in the room condition for 24±2 hours. 8.4 Temperature 1 cycle: Cycle 1 step: -40±2°C / 30±3 minutes 2 step: Ordinary temp. / 10 to 15 minutes 3 step: +85±2°C / 30±3 min 4 step: Ordinary temp. / 10 to 15 minutes Total of 10 cycles Then measured after exposure in the room condition for 24±2 hours. 9. Specification of Packaging 9.1 Appearance and Dimensions of plastic tape 1 φ1.5+0.1 ※Lead-in/out wire 5±0. -0 7 ( 0 .2 ) 1. ※Thepackingdirectionsofthechipcoil 5 intapingareunifiedwiththein/out 0 ±0.2 3.5±0. 0±0.2 positionsoftheleadwire. 3.6 8. Dimension of the Cavity is measured at the bottom side. 4.0±0.1 4.0±0.1 (in mm) 1.7±0.2 2.9±0.2 2.0±0.05 Directionof feed 9.2 Specification of Taping (1) Packing quantity (standard quantity) 2,000 pcs / reel (2) Packing Method Products shall be packed in the each embossed cavity of plastic tape and sealed by cover tape. (3) Sprocket hole The sprocket holes are to the right as the tape is pulled toward the user. (4) Spliced point Plastic tape and Cover tape has no spliced point. (5) Missing components number Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater, and are not continuous. The specified quantity per reel is kept. 9.3 Pull Strength Embossed carrier tape 10N min. Cover tape 5N min. MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P4/8 9.4 Peeling off force of cover tape 165to180degree Speed of Peeling off 300mm/min F Cover tape 0.2 to 0.7N Peeling off force (minimum value is typical) Plastictape 9.5 Dimensions of Leader-tape, Trailer and Reel There shall be leader-tape (cover tape) and trailer-tape (empty tape) as follows. Trailer Leader 2.0±0.5 160min. Label 190min. 210min. Emptytape Covertape φ13.0±0.2 φ60±1 0 φ21.0±0.8 Directionof feed 9±1 0 13±1.4 φ180±03 9.6 Marking for reel Customer part number, MURATA part number, Inspection number(∗1), RoHS marking(∗2), Quantity etc ・・・ ∗1) <Expression of Inspection No.> □□ OOOO ××× (1) (2) (3) (1) Factory Code (2) Date First digit : Year / Last digit of year Second digit : Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D Third, Fourth digit : Day (3) Serial No. ∗2) « Expression of RoHS marking » ROHS – Y (△) (1) (2) (1) RoHS regulation conformity (2) MURATA classification number 9.7 Marking for Outside package (corrugated paper box) Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS marking (∗2) , Quantity, etc ・・・ 9.8. Specification of Outer Case Outer Case Dimensions (mm) Standard Reel Quantity Label W D H in Outer Case (Reel) H 186 186 93 5 ∗Above Outer Case size is typical. It depends on a quantity of an order. D W 10. Caution Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (2) Aerospace equipment (7) Traffic signal equipment (3) Undersea equipment (8) Disaster prevention / crime prevention equipment (4) Power plant control equipment (9) Data-processing equipment (5) Medical equipment (10) Applications of similar complexity and /or reliability requirements to the applications listed in the above MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P5/8 11. Notice This product is designed for solder mounting. Please consult us in advance for applying other mounting method such as conductive adhesive. 11.1 Land pattern designing Recommended land patterns for flow and reflow soldering are as follows: These have been designed for Electric characteristics and solderability. Please follow the recommended patterns. Otherwise, their performance which includes electrical performance or solderability may be affected, or result to "position shift" in soldering process. Flow Soldering Reflow Soldering ∗ 5.5 ChipCoil 5.5 Land Solder Resist 0 0 1.0 2. 1. 1.3 1 .0 1.3 1.0 (in mm) ∗ Applicable to flow soldering. 11.2 Flux, Solder ・Use rosin-based flux. Flux ・Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value). ・Don’t use water-soluble flux. ・Use Sn-3.0Ag-0.5Cu solder. Solder ・Standard thickness of solder paste : 200μm to 300μm 11.3 Flow soldering conditions / Reflow soldering conditions ・Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is limited to 100°C max. Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of product quality. ・Standard soldering profile and the limit soldering profile is as follows. The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of product quality. Soldering profile (1)Flow soldering profile Temp. (℃) 265℃±3℃ 250℃ Limit Profile 150 Heating Time Standard Profile 60s min. Time.(s) Standard Profile Limit Profile Pre-heating 150℃、60s min. Heating 250℃、4s~6s 265℃±3℃、5s Cycle of flow 2 times 1 time MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P6/8 (2)Reflow soldering profile Temp. 260℃ (℃) 245℃±3℃ 230℃ 220℃ Limit Profile 180 150 30s~60s Standard Profile 60s max. 90s±30s Time.(s) Standard Profile Limit Profile Pre-heating 150~180°C 、90s±30s Heating above 220°C、30s~60s above 230°C、60s max. Peak temperature 245±3°C 260°C,10s Cycle of reflow 2 times 1 time 11.4 Reworking with soldering iron. The following conditions must be strictly followed when using a soldering iron. Pre-heating 150°C,1 min Tip temperature 350°C max. Soldering iron output 80W max. Tip diameter 3mm max. Soldering time 3(+1,-0)s Times 2 times Note : Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the products due to the thermal shock. 11.5 Solder Volume ・Solder shall be used not to be exceed the upper limits as shown below. ・Accordingly increasing the solder volume, the mechanical stress to Chip is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. UpperLimit 1/3T≦ t ≦T Recommendable (T: Lower flange thickness) T t 11.6 Product's location The following shall be considered when designing and laying out P.C.B.’s. (1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board. [Products direction] a Products shall be located in the sideways direction (Length: a<b) to the mechanical b stress. 〈Poor example〉 〈Good example〉 MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P7/8 (2) Components location on P.C.B. separation. It is effective to implement the following measures, to reduce stress in separating the board. It is best to implement all of the following three measures; however, implement as many measures as possible to reduce stress. Contents of Measures Stress Level (1) Turn the mounting direction of the component parallel to A > D *1 the board separation surface. (2) Add slits in the board separation part. A > B (3) Keep the mounting position of the component away from A > C the board separation surface. C Seam B *1 A > D is valid when stress is added vertically to the perforation as with Hand Separation. If a Cutting Disc is used, stress will be diagonal to b A D the PCB, therefore A > D is invalid. Slit Length:a<b a (3) Mounting Components Near Screw Holes When a component is mounted near a screw hole, it may be affected by the board deflection that occurs during the tightening of the screw. Mount the component Screw Hole Recommended in a position as far away from the screw holes as possible. 11.7 Cleaning Conditions Products shall be cleaned on the following conditions. (1) Cleaning temperature shall be limited to 60°C max.(40°C max for IPA.) (2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at the mounted products and P.C.B. Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 minutes max. (3) Cleaner 1. Alternative cleaner ・Isopropyl alcohol (IPA) 2. Aqueous agent ・PINE ALPHA ST-100S (4) There shall be no residual flux and residual cleaner after cleaning. In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to remove the cleaner. (5) Other cleaning Please contact us. 11.8 Resin coating The inductance value may change due to high cure-stress of resin to be used for coating/molding products. An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating condition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some operating condition may cause corrosion of wire of coil, leading to open circuit. So, please pay your careful attention when you select resin in case of coating/molding the products with the resin.Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your board. 11.9 Caution for use ・Sharp material such as a pair of tweezers or other material such as bristles of cleaning brush, shall not be touched to the winding portion to prevent the breaking of wire. ・Mechanical shock should not be applied to the products mounted on the board to prevent the breaking of the core 11.10 Handling of a substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product. Bending Twisting MURATA MFG.CO., LTD

SpecNo.JELF243A-0030T-01 R e f e r e n c e O n l y P8/8 11.11 Storage and Handling Requirements (1) Storage period Use the products within 12 months after delivered. Solderability should be checked if this period is exceeded. (2) Storage conditions ・Products should be stored in the warehouse on the following conditions. Temperature : -10 ~ 40°C Humidity : 15 to 85% relative humidity No rapid change on temperature and humidity The electrode of the products is coated with solder. Don't keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidization of electrode, resulting in poor solderability. ・Products should not be stored on bulk packaging condition to prevent the chipping of the core and the breaking of winding wire caused by the collision between the products. ・Products should be stored on the palette for the prevention of the influence from humidity, dust and so on. ・Products should be s stored in the warehouse without heat shock, vibration, direct sunlight and so on. (3) Handling Condition Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. 12. Note (1) Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. (2) You are requested not to use our product deviating from the reference specifications. (3) The contents of this reference specification are subject to change without advance notice. Please approve our product specifications or transact the approval sheet for product specifications before ordering MURATA MFG.CO., LTD