Product Sample & Technical Tools & Support & Folder Buy Documents Software Community LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 LMx24, LMx24x, LMx24xx, LM2902, LM2902x, LM2902xx, LM2902xxx Quadruple Operational Amplifiers 1 Features 2 Applications • 2-kVESDProtectionfor: • Blu-rayPlayersandHomeTheaters 1 – LM224K,LM224KA • ChemicalandGasSensors – LM324K,LM324KA • DVDRecordersandPlayers – LM2902K,LM2902KV,LM2902KAV • DigitalMultimeter:BenchandSystems • WideSupplyRanges • DigitalMultimeter:Handhelds – SingleSupply:3Vto32V • FieldTransmitter:TemperatureSensors (26VforLM2902) • MotorControl:ACInduction,BrushedDC, – DualSupplies: ±1.5Vto ±16V BrushlessDC,High-Voltage,Low-Voltage, (±13VforLM2902) PermanentMagnet,andStepperMotor • LowSupply-CurrentDrainIndependentof • Oscilloscopes SupplyVoltage:0.8mATypical • TV:LCDandDigital • Common-ModeInputVoltageRangeIncludes • TemperatureSensorsorControllersUsing Ground,AllowingDirectSensingNearGround Modbus • LowInputBiasandOffsetParameters • WeighScales – InputOffsetVoltage:3mVTypical 3 Description MMAVersions:2mVTypical These devices consist of four independent high-gain – InputOffsetCurrent:2nATypical frequency-compensated operational amplifiers that – InputBiasCurrent:20nATypical are designed specifically to operate from a single MMAVersions:15nATypical supplyorsplitsupplyoverawiderangeofvoltages. • DifferentialInputVoltageRangeEqualto Maximum-RatedSupplyVoltage: DeviceInformation(1) 32V(26VforLM2902) PARTNUMBER PACKAGE BODYSIZE(NOM) • Open-LoopDifferentialVoltageAmplification: SOIC(14) 8.65mm×3.91mm 100V/mVTypical CDIP(14) 19.56mm×6.67mm LMx24,LMx24x, • InternalFrequencyCompensation PDIP(14) 19.30mm×6.35mm LMx24xx,LM2902, • OnProductsComplianttoMIL-PRF-38535, LM2902x, CFP(14) 9.21mm×5.97mm LM2902xx, AllParametersareTestedUnlessOtherwise TSSOP(14) 5.00mm×4.40mm LM2902xxx Noted.OnAllOtherProducts,Production SO(14) 9.20mm×5.30mm ProcessingDoesNotNecessarilyIncludeTesting SSOP(14) 6.20mm×5.30mm ofAllParameters. LM124,LM124A LCCC(20) 8.90mm×8.90mm (1) For all available packages, see the orderable addendum at theendofthedatasheet. Symbol(EachAmplifier) IN− − OUT IN+ + 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectualpropertymattersandotherimportantdisclaimers.PRODUCTIONDATA.

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com Table of Contents 1 Features.................................................................. 1 8.1 Overview.................................................................10 2 Applications........................................................... 1 8.2 FunctionalBlockDiagram.......................................10 3 Description............................................................. 1 8.3 FeatureDescription.................................................11 8.4 DeviceFunctionalModes........................................11 4 RevisionHistory..................................................... 2 9 ApplicationandImplementation........................ 12 5 PinConfigurationandFunctions......................... 3 9.1 ApplicationInformation............................................12 6 Specifications......................................................... 4 9.2 TypicalApplication .................................................12 6.1 AbsoluteMaximumRatings......................................4 10 PowerSupplyRecommendations..................... 13 6.2 ESDRatings ............................................................4 11 Layout................................................................... 13 6.3 RecommendedOperatingConditions.......................4 6.4 ThermalInformation..................................................5 11.1 LayoutGuidelines.................................................13 6.5 ElectricalCharacteristicsforLMx24andLM324K....5 11.2 LayoutExamples...................................................14 6.6 ElectricalCharacteristicsforLM2902andLM2902V 6 12 DeviceandDocumentationSupport................. 15 6.7 ElectricalCharacteristicsforLMx24Aand 12.1 DocumentationSupport .......................................15 LM324KA................................................................... 6 12.2 RelatedLinks........................................................15 6.8 OperatingConditions................................................7 12.3 Trademarks...........................................................15 6.9 TypicalCharacteristics..............................................8 12.4 ElectrostaticDischargeCaution............................15 7 ParameterMeasurementInformation..................9 12.5 Glossary................................................................15 8 DetailedDescription............................................ 10 13 Mechanical,Packaging,andOrderable Information........................................................... 15 4 Revision History NOTE:Pagenumbersforpreviousrevisionsmaydifferfrompagenumbersinthecurrentversion. ChangesfromRevisionV(January2014)toRevisionW Page • AddedApplications................................................................................................................................................................. 1 • AddedDeviceInformationtable............................................................................................................................................. 1 • AddedDeviceandDocumentationSupportsection............................................................................................................. 15 • AddedMechanical,Packaging,andOrderableInformationsection..................................................................................... 15 ChangesfromRevisionU(August2010)toRevisionV Page • UpdateddocumenttonewTIdatasheetformat-nospecificationchanges......................................................................... 1 • UpdatedFeatures................................................................................................................................................................... 1 • RemovedOrderingInformationtable..................................................................................................................................... 3 • AddedESDwarning............................................................................................................................................................. 15 2 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 5 Pin Configuration and Functions FKPackage 20-PinLCCC D,DB,J,N,NS,PW,W (TopView) 14-PinSOIC,SSOP,CDIP,PDIP,SO,TSSOP,CFP (TopView) T T − U U − N O CO N 1OUT 1 14 4OUT 1I 1 N4 4I 1IN− 2 13 4IN− 1IN+ 43 2 1 20 1918 4IN+ 1IN+ 3 12 4IN+ NC 5 17 NC VCC 4 11 GND VCC 6 16 GND 2IN+ 5 10 3IN+ NC 7 15 NC 2IN− 6 9 3IN− 2IN+ 8 14 3IN+ 2OUT 7 8 3OUT 9 101112 13 − T C T − N U N U N 2I O O 3I 2 3 PinFunctions PIN SOIC,SSOP, CDIP,PDIP, I/O DESCRIPTION NAME LCCCNO. SO,TSSOP, CFPNO. 1IN– 3 2 I Negativeinput 1IN+ 4 3 I Positiveinput 1OUT 2 1 O Output 2IN– 9 6 I Negativeinput 2IN+ 8 5 I Positiveinput 2OUT 10 7 O Output 3IN– 13 9 I Negativeinput 3IN+ 14 10 I Positiveinput 3OUT 12 8 O Output 4IN– 19 13 I Negativeinput 4IN+ 18 12 I Positiveinput 4OUT 20 14 O Output GND 16 11 — Ground 1 5 7 NC — — Donotconnect 11 15 17 V 6 4 — Powersupply CC Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings overoperatingfree-airtemperaturerange(unlessotherwisenoted)(1) LMx24,LMx24x, LM2902 LMx24xx,LM2902x, LM2902xx,LM2902xxx UNIT MIN MAX MIN MAX Supplyvoltage,V (2) ±13 26 ±16 32 V CC Differentialinputvoltage,V (3) ±26 ±32 V ID Inputvoltage,V (eitherinput) –0.3 26 –0.3 to32 V I Durationofoutputshortcircuit(oneamplifier)togroundat(or below)T =25°C,V ≤15V(4) Unlimited Unlimited A CC Operatingvirtualjunctiontemperature,T 150 150 °C J Casetemperaturefor60seconds FKpackage 260 °C Leadtemperature1.6mm(1/16inch) JorWpackage 300 300 °C fromcasefor60seconds Storagetemperature,T –65 150 –65 150 °C stg (1) StressesbeyondthoselistedunderAbsoluteMaximumRatingsmaycausepermanentdamagetothedevice.Thesearestressratings only,andfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunderRecommendedOperating Conditionsisnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. (2) Allvoltagevalues(exceptdifferentialvoltagesandV specifiedforthemeasurementofI )arewithrespecttothenetworkGND. CC OS (3) DifferentialvoltagesareatIN+,withrespecttoIN−. (4) ShortcircuitsfromoutputstoVCCcancauseexcessiveheatingandeventualdestruction. 6.2 ESD Ratings VALUE UNIT LM224K,LM224KA,LM324K,LM324KA,LM2902K,LM2902KV,LM2902KAV Human-bodymodel(HBM),perANSI/ESDA/JEDECJS-001(1) ±2000 V Electrostaticdischarge V (ESD) Charged-devicemodel(CDM),perJEDECspecificationJESD22-C101 ±1000 LM124,LM124A,LM224,LM224A,LM324,LM324A,LM2902,LM2902V Human-bodymodel(HBM),perANSI/ESDA/JEDECJS-001(1) ±500 V Electrostaticdischarge V (ESD) Charged-devicemodel(CDM),perJEDECspecificationJESD22-C101 ±1000 (1) JEDECdocumentJEP155statesthat500-VHBMallowssafemanufacturingwithastandardESDcontrolprocess. 6.3 Recommended Operating Conditions overoperatingfree-airtemperaturerange(unlessotherwisenoted) LMx24,LMx24x,LMx24xx, UNIT LM2902 LM2902x,LM2902xx,LM2902xxx MIN MAX MIN MAX V Supplyvoltage 3 26 3 30 V CC V Common-modevoltage 0 V –2 0 V –2 V CM CC CC LM124 –55 125 T Operatingfreeair LM2904 –40 125 A °C temperature LM324 0 70 LM224 –25 85 4 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 6.4 Thermal Information LMx24,LM2902 LMx24 THERMALMETRIC(1) D(SOIC) DB N(PDIP) NS(SO) PW FK J(CDIP) W(CFP) UNIT (SSOP) (TSSOP) (LCCC) 14PINS 14PINS 14PINS 14PINS 14PINS 20PINS 14PINS 14PINS R (2)(3) Junction-to- θJA ambientthermal 86 86 80 76 113 — — — resistance °C/W R (4) Junction-to-case θJC (top)thermal — — — — — 5.61 15.05 14.65 resistance (1) Formoreinformationabouttraditionalandnewthermalmetrics,seetheICPackageThermalMetricsapplicationreport,SPRA953. (2) ShortcircuitsfromoutputstoVCCcancauseexcessiveheatingandeventualdestruction. (3) MaximumpowerdissipationisafunctionofT ,R ,andT .Themaximumallowablepowerdissipationatanyallowableambient J(max) θJA A temperatureisP =(T –T )/R .OperatingattheabsolutemaximumT of150°Ccanaffectreliability. D J(max) A θJA J (4) MaximumpowerdissipationisafunctionofT ,R ,andT .Themaximumallowablepowerdissipationatanyallowablecase J(max) θJA C temperatureisP =(T –T )/R .OperatingattheabsolutemaximumT of150°Ccanaffectreliability. D J(max) C θJC J 6.5 Electrical Characteristics for LMx24 and LM324K atspecifiedfree-airtemperature,V =5V(unlessotherwisenoted) CC LM124,LM224 LM324,LM324K PARAMETER TESTCONDITIONS(1) TA(2) MIN TYP(3) MAX MIN TYP(3) MAX UNIT VIO Inputoffsetvoltage VVCOC==15.4VVtoMAX,VIC=VICRmin, Fu2ll5r°aCnge 3 57 3 79 mV 25°C 2 30 2 50 IIO Inputoffsetcurrent VO=1.4V Fullrange 100 150 nA 25°C –20 –150 –20 –250 IIB Inputbiascurrent VO=1.4V Fullrange –300 –500 nA 0to 0to 25°C VICR Common-modeinputvoltagerange VCC=5VtoMAX VCC–01.t5o VCC–01.t5o V Fullrange VCC–2 VCC–2 RL=2kΩ 25°C VCC–1.5 VCC–1.5 VOH High-leveloutputvoltage RVCLC==1M0AkΩX RRLL=≥120kΩkΩ FFuu2llll5rr°aaCnnggee 2267 28 2267 28 V VOL Low-leveloutputvoltage RL≤10kΩ Fullrange 5 20 5 20 mV AVD Laamrpgleif-icsaigtnioanldifferentialvoltage VRCLC≥=21k5ΩV,VO=1Vto11V, Fu2ll5r°aCnge 5205 100 2155 100 V/mV CMRR Common-moderejectionratio VIC=VICRmin 25°C 70 80 65 80 dB Supply-voltagerejectionratio kSVR (ΔVCC/ΔVIO) 25°C 65 100 65 100 dB VO1/VO2 Crosstalkattenuation f=1kHzto20kHz 25°C 120 120 dB VCC=15V, 25°C –20 –30 –60 –20 –30 –60 VVIOD==01V, Source Fullrange –10 –10 mA IO Outputcurrent VCC=15V, 25°C 10 20 10 20 VVIOD==1–51VV, Sink Fullrange 5 5 VID=–1V,VO=200mV 25°C 12 30 12 30 μA IOS Short-circuitoutputcurrent VGCNCData5t–V5,VVO=0, 25°C ±40 ±60 ±40 ±60 mA VO=2.5V,noload Fullrange 0.7 1.2 0.7 1.2 ICC Supplycurrent(fouramplifiers) VCC=MAX,VO=0.5VCC, Fullrange 1.4 3 1.4 3 mA noload (1) Allcharacteristicsaremeasuredunderopen-loopconditions,withzerocommon-modeinputvoltage,unlessotherwisespecified.MAX V fortestingpurposesis26VforLM2902and30Vfortheothers. CC (2) Fullrangeis–55°Cto125°CforLM124,–25°Cto85°CforLM224,and0°Cto70°CforLM324. (3) AlltypicalvaluesareatT =25°C A Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com 6.6 Electrical Characteristics for LM2902 and LM2902V atspecifiedfree-airtemperature,V =5V(unlessotherwisenoted) CC LM2902 LM2902V PARAMETER TESTCONDITIONS(1) TA(2) MIN TYP(3) MAX MIN TYP(3) MAX UNIT Non-A-suffix 25°C 3 7 3 7 VCC=5VtoMAX, devices Fullrange 10 10 VIO Inputoffsetvoltage VVIOC==1V.I4CRVmin, A-suffix 25°C 1 2 mV devices Fullrange 4 ΔVIO/ΔT Inputoffsetvoltagetemperaturedrift RS=0Ω Fulrange 7 μV/°C 25°C 2 50 2 50 IIO Inputoffsetcurrent VO=1.4V Fullrange 300 150 nA ΔIIO/ΔT Inputoffsetvoltagetemperaturedrift Fulrange 10 pA/°C 25°C –20 –250 –20 –250 IIB Inputbiascurrent VO=1.4V Fullrange –500 –500 nA 0to 0to 25°C VICR Common-modeinputvoltagerange VCC=5VtoMAX VCC–01.t5o VCC–01.t5o V Fullrange VCC–2 VCC–2 RL=2kΩ 25°C VOH High-leveloutputvoltage RVCLC==1M0AkΩX RRLL=≥120kΩkΩ FFuu2llll5rr°aaCnnggee VCC–122.523 24 VCC–122.567 V VOL Low-leveloutputvoltage RL≤10kΩ Fullrange 5 20 5 20 mV Large-signaldifferentialvoltage VCC=15V, 25°C 25 100 25 100 AVD amplification VROL≥=21kVΩto11V, Fullrange 15 15 V/mV CMRR Common-moderejectionratio VIC=VICRmin 25°C 50 80 60 80 dB Supply-voltagerejectionratio kSVR (ΔVCC/ΔVIO) 25°C 50 100 60 100 dB VO1/VO2 Crosstalkattenuation f=1kHzto20kHz 25°C 120 120 dB VCC=15V, 25°C –20 –30 –60 –20 –30 –60 VVIOD==01V, Source Fullrange –10 –10 mA IO Outputcurrent VCC=15V, 25°C 10 20 10 20 VVIOD==1–51VV, Sink Fullrange 5 5 VID=–1V,VO=200mV 25°C 30 12 40 μA IOS Short-circuitoutputcurrent VCCat5V,VO=0,GNDat–5V 25°C ±40 ±60 ±40 ±60 mA VO=2.5V,noload Fullrange 0.7 1.2 0.7 1.2 ICC Supplycurrent(fouramplifiers) VCC=MAX,VO=0.5VCC, Fullrange 1.4 3 1.4 3 mA noload (1) Allcharacteristicsaremeasuredunderopen-loopconditions,withzerocommon-modeinputvoltage,unlessotherwisespecified.MAX V fortestingpurposesis26VforLM2902and32VforLM2902V. CC (2) Fullrangeis–40°Cto125°CforLM2902. (3) AlltypicalvaluesareatT =25°C. A 6.7 Electrical Characteristics for LMx24A and LM324KA atspecifiedfree-airtemperature,V =5V(unlessotherwisenoted) CC LM124A LM224A LM324A,LM324KA PARAMETER TESTCONDITIONS(1) TA(2) MIN TYP(3) MAX MIN TYP(3) MAX MIN TYP(3) MAX UNIT Inputoffset VCC=5Vto30V, 25°C 2 2 3 2 3 VIO voltage VVIOC==1V.I4CRVmin, Fullrange 4 4 5 mV Inputoffset 25°C 10 2 15 2 30 IIO current VO=1.4V Fullrange 30 30 75 nA Inputbias 25°C –50 –15 –80 –15 –100 IIB current VO=1.4V Fullrange –100 –100 –200 nA (1) Allcharacteristicsaremeasuredunderopen-loopconditions,withzerocommon-modeinputvoltage,unlessotherwisespecified. (2) Fullrangeis–55°Cto125°CforLM124A,–25°Cto85°CforLM224A,and0°Cto70°CforLM324A. (3) AlltypicalvaluesareatT =25°C. A 6 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 Electrical Characteristics for LMx24A and LM324KA (continued) atspecifiedfree-airtemperature,V =5V(unlessotherwisenoted) CC LM124A LM224A LM324A,LM324KA PARAMETER TESTCONDITIONS(1) TA(2) MIN TYP(3) MAX MIN TYP(3) MAX MIN TYP(3) MAX UNIT 0to 0to 0to VICR Cirnaopnmugtemvoonlta-mgeode VCC=30V Fu2ll5r°aCnge VCC−01.t5o VCC–01.t5o VCC–01.t5o V VCC−2 VCC–2 VCC–2 RL=2kΩ 25°C VCC−1.5 VCC–1.5 VCC–1.5 High-level VOH outputvoltage VCC=30V RRLL=≥120kΩkΩ FFuullllrraannggee 2267 2267 28 2267 28 V Low-leveloutput VOL voltage RL≤10kΩ Fullrange 20 5 20 5 20 mV AVD Ldvaoaimfflrtepgarlegief-iencstaiigatniloanl VVRCOLC≥==211kV5ΩtVo,11V, Fu2ll5r°aCnge 5205 100 5205 100 2155 100 V/mV Common-mode CMRR rejectionratio VIC=VICRmin 25°C 70 70 80 65 80 dB Supply-voltage kSVR rejectionratio 25°C 65 65 100 65 100 dB (ΔVCC/ΔVIO) Crosstalk VO1/VO2 attenuation f=1kHzto20kHz 25°C 120 120 120 dB VCC=15V, 25°C –20 –20 –30 –60 –20 –30 –60 VVIOD==01V, Source Fullrange –10 –10 –10 mA IO Outputcurrent VCC=15V, 25°C 10 10 20 1 20 VVIOD==1–51VV, Sink Fullrange 5 5 5 VID=−1V,VO=200mV 25°C 12 12 30 12 30 μA IOS Souhtoprut-tccirucrureitnt VVCOC=a0t5V,GNDat–5V, 25°C ±40 ±60 ±40 ±60 ±40 ±60 mA VO=2.5V,noload Fullrange 0.7 1.2 0.7 1.2 0.7 1.2 Supplycurrent ICC (fouramplifiers) VCC=30V,VO=15V, Fullrange 1.4 3. 1.4 3 1.4 3 mA noload 6.8 Operating Conditions V =±15V,T =25°C CC A PARAMETER TESTCONDITIONS TYP UNIT SR Slewrateatunitygain R =1MΩ,C =30pF,V =±10V(seeFigure7) 0.5 V/μs L L I B Unity-gainbandwidth R =1MΩ,C =20pF(seeFigure7) 1.2 MHz 1 L L V Equivalentinputnoisevoltage R =100Ω,V =0V,f=1kHz(seeFigure8) 35 nV/√Hz n S I Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com 6.9 Typical Characteristics 10 8 5 V) VCC = 15 V 3 cc ( 7 2 +V oltage (V) 00..351 erenced to 56 put V 0.2 e Ref 4 Out 0.1 oltag 3 0.05 V 00..0023 VVCCCC == 155 V V utput 2 VCC = 30 V O 0.01 1 0.001 0.01 0.10.2 0.5 1 23 5710 20 50100 0.001 0.01 0.10.2 0.5 1 23 5710 20 50100 Output Sink Current (mA) Output Source Current (mA) D001 D002 Figure1.OutputSinkingCharacteristics Figure2.OutputSourcingCharacteristics 0.09 3.25 3 0.08 2.75 0.07 2.5 0.06 V) 2.25 e ( Iout (A) 00..0045 ut Voltag 1.17.552 p 0.03 ut 1.25 O 1 0.02 Input 0.75 Output 0.01 0.5 0 0.25 -55 -40 -25 -10 5 20 35 50 65 80 95 110 125 0 5 10 15 20 25 30 35 40 45 50 Temperature (qC) Time (PS) D003 D004 Figure3.SourceCurrentLimiting Figure4.VoltageFollowerLargeSignalResponse(50pF) 90 20 B) 80 17.5 d o ( 70 ection Rati 5600 ng (Vpp) 121.55 ej wi 10 Mode R 3400 utput S 7.5 mon- 20 O 5 m Co 10 2.5 0 0 100200 5001000 10000 100000 1000000 1000 2000 500010000 100000 1000000 Frequency (Hz) Frequency (Hz) D006 D007 Figure5.Common-ModeRejectionRatio Figure6.MaximumOutputSwingvs.Frequency (VCC=15V) 8 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 7 Parameter Measurement Information 900Ω V CC+ V CC+ − 100Ω V V + O VI= 0 V − I RS VO VCC− CL RL + V CC− Figure7.Unity-GainAmplifier Figure8.Noise-TestCircuit Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com 8 Detailed Description 8.1 Overview These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902 device), and V is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is CC independentofthemagnitudeofthesupplyvoltage. Applications include transducer amplifiers, DC amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 device can be operated directly from the standard 5-V supply that is used in digital systems and provides the requiredinterfaceelectronics,withoutrequiringadditional±15-Vsupplies. 8.2 Functional Block Diagram VCC ≈6-µA ≈6-µA ≈100-µA Current Current Current Regulator Regulator Regulator OUT IN− † IN+ ≈50-µA Current † Regulator GND To Other Amplifiers COMPONENT COUNT (total device) Epi-FET 1 Transistors 95 Diodes 4 Resistors 11 Capacitors 4 †ESD protection cells - available on LM324K and LM324KAonly 10 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 8.3 Feature Description 8.3.1 Unity-GainBandwidth Gain bandwidth product is found by multiplying the measured bandwidth of an amplifier by the gain at which that bandwidthwasmeasured.Thesedeviceshaveahighgainbandwidthof1.2MHz. 8.3.2 SlewRate The slew rate is the rate at which an operational amplifier can change its output when there is a change on the input.Thesedeviceshavea0.5-V/μsslewrate. 8.3.3 InputCommonModeRange The valid common mode range is from device ground to V – 1.5 V (V – 2 V across temperature). Inputs may CC CC exceed V up to the maximum V without device damage. At least one input must be in the valid input CC CC common mode range for output to be correct phase. If both inputs exceed valid range then output phase is undefined. If either input is less than –0.3 V then input current should be limited to 1 mA and output phase is undefined. 8.4 Device Functional Modes These devices are powered on when the supply is connected. This device can be operated as a single supply operationalamplifierordualsupplyamplifierdependingontheapplication. Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com 9 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validateandtesttheirdesignimplementationtoconfirmsystemfunctionality. 9.1 Application Information The LMx24 and LM2902 operational amplifiers are useful in a wide range of signal conditioning applications. InputscanbepoweredbeforeVCCforflexibilityinmultiplesupplycircuits. 9.2 Typical Application A typical application for an operational amplifier in an inverting amplifier. This amplifier takes a positive voltage on the input, and makes it a negative voltage of the same magnitude. In the same manner, it also makes negativevoltagespositive. RF Vsup+ RI V OUT + V IN Vsup- Figure9. ApplicationSchematic 9.2.1 DesignRequirements The supply voltage must be chosen such that it is larger than the input voltage range and output range. For instance, this application will scale a signal of ±0.5 V to ±1.8 V. Setting the supply at ±12 V is sufficient to accommodatethisapplication. 9.2.2 DetailedDesignProcedure DeterminethegainrequiredbytheinvertingamplifierusingEquation1 andEquation2: (1) (2) Once the desired gain is determined, choose a value for RI or RF. Choosing a value in the kilohm range is desirable because the amplifier circuit will use currents in the milliamp range. This ensures the part will not draw too much current. This example will choose 10 kΩ for RI which means 36 kΩ will be used for RF. This was determinedbyEquation3. (3) 12 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 Typical Application (continued) 9.2.3 ApplicationCurve 2 VIN 1.5 VOUT 1 0.5 olts0 V -0.5 -1 -1.5 -2 0 0.5 1 1.5 2 Time (ms) Figure10. InputandOutputVoltagesoftheInvertingAmplifier 10 Power Supply Recommendations CAUTION Supply voltages larger than 32 V for a single supply, or outside the range of ±16 V for a dual supply can permanently damage the device (see the Absolute Maximum Ratings). Place 0.1-μF bypass capacitors close to the power-supply pins to reduce errors coupling in from noisy or high impedancepowersupplies.Formoredetailedinformationonbypasscapacitorplacement,refertotheLayout. 11 Layout 11.1 Layout Guidelines Forbestoperationalperformanceofthedevice,usegoodPCBlayoutpractices,including: • Noise can propagate into analog circuitry through the power pins of the circuit as a whole, as well as the operational amplifier. Bypass capacitors are used to reduce the coupled noise by providing low impedance powersourceslocaltotheanalogcircuitry. – Connect low-ESR, 0.1-μF ceramic bypass capacitors between each supply pin and ground, placed as close to the device as possible. A single bypass capacitor from V+ to ground is applicable for single supplyapplications. • Separate grounding for analog and digital portions of circuitry is one of the simplest and most-effective methods of noise suppression. One or more layers on multilayer PCBs are usually devoted to ground planes. A ground plane helps distribute heat and reduces EMI noise pickup. Make sure to physically separate digital andanaloggrounds,payingattentiontotheflowofthegroundcurrent. • To reduce parasitic coupling, run the input traces as far away from the supply or output traces as possible. If it is not possible to keep them separate, it is much better to cross the sensitive trace perpendicular as opposedtoinparallelwiththenoisytrace. • Place the external components as close to the device as possible. Keeping RF and RG close to the inverting inputminimizesparasiticcapacitance,asshowninLayoutExamples. • Keep the length of input traces as short as possible. Always remember that the input traces are the most sensitivepartofthecircuit. • Consider a driven, low-impedance guard ring around the critical traces. A guard ring can significantly reduce leakagecurrentsfromnearbytracesthatareatdifferentpotentials. Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 13 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 www.ti.com 11.2 Layout Examples Place components close to device and to each other to reduce parasitic errors Run the input traces as far away from the supply lines RF as possible NC NC VS+ Use low-ESR, ceramic RG bypass capacitor GND IN1í VCC+ VIN IN1+ OUT RIN VCCí NC GND Only needed for dual-supply operation GND VS- (or GND for single supply) VOUT Ground (GND) plane on another layer Figure11. OperationalAmplifierBoardLayoutforNoninvertingConfiguration RIN VIN + VOUT RG RF Figure12. OperationalAmplifierSchematicforNoninvertingConfiguration 14 SubmitDocumentationFeedback Copyright©1975–2015,TexasInstrumentsIncorporated ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

LM224K,LM224KA,LM324,LM324A,LM324K,LM324KA,LM2902 LM124,LM124A,LM224,LM224A,LM2902V,LM2902K,LM2902KV,LM2902KAV www.ti.com SLOS066W–SEPTEMBER1975–REVISEDMARCH2015 12 Device and Documentation Support 12.1 Documentation Support 12.1.1 RelatedDocumentation Forrelateddocumentation,seethefollowing: • CircuitBoardLayoutTechniques,SLOA089 12.2 Related Links The table below lists quick access links. Categories include technical documents, support and community resources,toolsandsoftware,andquickaccesstosampleorbuy. Table1.RelatedLinks TECHNICAL TOOLS& SUPPORT& PARTS PRODUCTFOLDER SAMPLE&BUY DOCUMENTS SOFTWARE COMMUNITY LM124 Clickhere Clickhere Clickhere Clickhere Clickhere LM124A Clickhere Clickhere Clickhere Clickhere Clickhere LM224 Clickhere Clickhere Clickhere Clickhere Clickhere LM224A Clickhere Clickhere Clickhere Clickhere Clickhere LM324 Clickhere Clickhere Clickhere Clickhere Clickhere LM324A Clickhere Clickhere Clickhere Clickhere Clickhere LM2902 Clickhere Clickhere Clickhere Clickhere Clickhere LM2902V Clickhere Clickhere Clickhere Clickhere Clickhere LM224K Clickhere Clickhere Clickhere Clickhere Clickhere LM224KA Clickhere Clickhere Clickhere Clickhere Clickhere LM324K Clickhere Clickhere Clickhere Clickhere Clickhere LM324KA Clickhere Clickhere Clickhere Clickhere Clickhere LM2902K Clickhere Clickhere Clickhere Clickhere Clickhere LM2902KV Clickhere Clickhere Clickhere Clickhere Clickhere LM2902KAV Clickhere Clickhere Clickhere Clickhere Clickhere 12.3 Trademarks Alltrademarksarethepropertyoftheirrespectiveowners. 12.4 Electrostatic Discharge Caution Thesedeviceshavelimitedbuilt-inESDprotection.Theleadsshouldbeshortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamagetotheMOSgates. 12.5 Glossary SLYZ022—TIGlossary. Thisglossarylistsandexplainsterms,acronymsanddefinitions. 13 Mechanical, Packaging, and Orderable Information The following pages include mechanical packaging and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of thisdocument.Forbrowserbasedversionsofthisdatasheet,refertothelefthandnavigation. Copyright©1975–2015,TexasInstrumentsIncorporated SubmitDocumentationFeedback 15 ProductFolderLinks:LM224K LM224KA LM324 LM324A LM324K LM324KA LM2902LM124 LM124A LM224 LM224A LM2902V LM2902K LM2902KV LM2902KAV

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) 5962-7704301VCA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-7704301VC A LM124JQMLV 5962-9950403V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type -55 to 125 5962-9950403VCA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-9950403VC A LM124AJQMLV 77043012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043012A LM124FKB 7704301CA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704301CA LM124JB 7704301DA ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704301DA LM124WB 77043022A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043022A LM124AFKB 7704302CA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704302CA LM124AJB 7704302DA ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704302DA LM124AWB JM38510/11005BCA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 JM38510 /11005BCA LM124AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043022A LM124AFKB LM124AJ ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 LM124AJ LM124AJB ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704302CA LM124AJB LM124AWB ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704302DA LM124AWB LM124D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 LM124 & no Sb/Br) LM124DG4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 LM124 & no Sb/Br) Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LM124DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 LM124 & no Sb/Br) LM124DRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 LM124 & no Sb/Br) LM124FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043012A LM124FKB LM124J ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 LM124J LM124JB ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704301CA LM124JB LM124W ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 LM124W LM124WB ACTIVE CFP W 14 1 TBD Call TI N / A for Pkg Type -55 to 125 7704301DA LM124WB LM224AD ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A & no Sb/Br) LM224ADR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM -25 to 85 LM224A & no Sb/Br) LM224ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A & no Sb/Br) LM224ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A & no Sb/Br) LM224AN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -25 to 85 LM224AN & no Sb/Br) LM224D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224 & no Sb/Br) LM224DG4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224 & no Sb/Br) LM224DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM -25 to 85 LM224 & no Sb/Br) LM224DRG3 ACTIVE SOIC D 14 2500 Green (RoHS SN Level-1-260C-UNLIM -25 to 85 LM224 & no Sb/Br) LM224DRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224 & no Sb/Br) LM224KAD ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA & no Sb/Br) Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LM224KADG4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA & no Sb/Br) LM224KADR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA & no Sb/Br) LM224KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA & no Sb/Br) LM224KAN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -25 to 85 LM224KAN & no Sb/Br) LM224KDR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224K & no Sb/Br) LM224KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -25 to 85 LM224K & no Sb/Br) LM224KN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -25 to 85 LM224KN & no Sb/Br) LM224N ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -25 to 85 LM224N & no Sb/Br) LM224NE4 ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -25 to 85 LM224N & no Sb/Br) LM2902D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902 & no Sb/Br) LM2902DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM -40 to 125 LM2902 & no Sb/Br) LM2902DRE4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902 & no Sb/Br) LM2902DRG3 ACTIVE SOIC D 14 2500 Green (RoHS SN Level-1-260C-UNLIM -40 to 125 LM2902 & no Sb/Br) LM2902DRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902 & no Sb/Br) LM2902KAVQDR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA & no Sb/Br) LM2902KAVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA & no Sb/Br) LM2902KAVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA & no Sb/Br) LM2902KAVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA & no Sb/Br) Addendum-Page 3

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LM2902KD ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K & no Sb/Br) LM2902KDB ACTIVE SSOP DB 14 80 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K & no Sb/Br) LM2902KDG4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K & no Sb/Br) LM2902KDR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K & no Sb/Br) LM2902KN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 125 LM2902KN & no Sb/Br) LM2902KNSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K & no Sb/Br) LM2902KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K & no Sb/Br) LM2902KPW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K & no Sb/Br) LM2902KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K & no Sb/Br) LM2902KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K & no Sb/Br) LM2902KVQDR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV & no Sb/Br) LM2902KVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV & no Sb/Br) LM2902KVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV & no Sb/Br) LM2902KVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV & no Sb/Br) LM2902N ACTIVE PDIP N 14 25 Green (RoHS NIPDAU | SN N / A for Pkg Type -40 to 125 LM2902N & no Sb/Br) LM2902NE4 ACTIVE PDIP N 14 25 Pb-Free NIPDAU N / A for Pkg Type -40 to 125 LM2902N (RoHS) LM2902NSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902 & no Sb/Br) LM2902PW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902 & no Sb/Br) Addendum-Page 4

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LM2902PWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM -40 to 125 L2902 & no Sb/Br) LM2902PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902 & no Sb/Br) LM2902PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS SN Level-1-260C-UNLIM -40 to 125 L2902 & no Sb/Br) LM2902PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 L2902 & no Sb/Br) LM324AD ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324ADBR ACTIVE SSOP DB 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324ADE4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324ADR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324AN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type 0 to 70 LM324AN & no Sb/Br) LM324ANSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A & no Sb/Br) LM324APW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324A & no Sb/Br) LM324APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324A & no Sb/Br) LM324APWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 70 L324A & no Sb/Br) LM324APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324A & no Sb/Br) LM324D ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) Addendum-Page 5

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LM324DE4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324DG4 ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324DR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324DRE4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324DRG3 ACTIVE SOIC D 14 2500 Green (RoHS SN Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324DRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324KAD ACTIVE SOIC D 14 50 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324KA & no Sb/Br) LM324KADR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324KA & no Sb/Br) LM324KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324KA & no Sb/Br) LM324KAN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type 0 to 70 LM324KAN & no Sb/Br) LM324KANSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324KA & no Sb/Br) LM324KAPW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324KA & no Sb/Br) LM324KAPWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324KA & no Sb/Br) LM324KAPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324KA & no Sb/Br) LM324KDR ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324K & no Sb/Br) LM324KN ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type 0 to 70 LM324KN & no Sb/Br) LM324KNSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324K & no Sb/Br) LM324KPW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324K & no Sb/Br) Addendum-Page 6

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) LM324KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324K & no Sb/Br) LM324N ACTIVE PDIP N 14 25 Green (RoHS NIPDAU | SN N / A for Pkg Type 0 to 70 LM324N & no Sb/Br) LM324NE3 ACTIVE PDIP N 14 25 Pb-Free SN N / A for Pkg Type 0 to 70 LM324N (RoHS) LM324NE4 ACTIVE PDIP N 14 25 Green (RoHS NIPDAU N / A for Pkg Type 0 to 70 LM324N & no Sb/Br) LM324NSR ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324NSRE4 ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324NSRG4 ACTIVE SO NS 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 LM324 & no Sb/Br) LM324PW ACTIVE TSSOP PW 14 90 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324 & no Sb/Br) LM324PWR ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 70 L324 & no Sb/Br) LM324PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324 & no Sb/Br) LM324PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS SN Level-1-260C-UNLIM 0 to 70 L324 & no Sb/Br) LM324PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 L324 & no Sb/Br) M38510/11005BCA ACTIVE CDIP J 14 1 TBD Call TI N / A for Pkg Type -55 to 125 JM38510 /11005BCA (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". Addendum-Page 7

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LM124, LM124-SP, LM124M, LM2902 : •Catalog: LM124, LM124 •Automotive: LM2902-Q1 •Enhanced Product: LM2902-EP •Military: LM124M, LM124M •Space: LM124-SP, LM124-SP NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 8

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 •Enhanced Product - Supports Defense, Aerospace and Medical Applications •Military - QML certified for Military and Defense Applications •Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 9

PACKAGE MATERIALS INFORMATION www.ti.com 10-Jul-2020 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) LM124DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224ADR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224ADRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224ADRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224DR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM224DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224DRG3 SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM224DRG3 SOIC D 14 2500 330.0 17.0 6.4 9.05 2.1 8.0 16.0 Q1 LM224DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902DR SOIC D 14 2500 330.0 17.0 6.4 9.05 2.1 8.0 16.0 Q1 LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902DR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902DRG3 SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 10-Jul-2020 Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) LM2902DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902KAVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902KAVQPWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM2902KPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902KVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902KVQPWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM2902PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902PWRG3 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM2902PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324ADR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM324ADRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324APWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324DR SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM324DRG3 SOIC D 14 2500 330.0 16.8 6.5 9.5 2.1 8.0 16.0 Q1 LM324DRG3 SOIC D 14 2500 330.0 17.0 6.4 9.05 2.1 8.0 16.0 Q1 LM324DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324KANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324KAPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324KPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324PWRG3 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 LM324PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page2

PACKAGE MATERIALS INFORMATION www.ti.com 10-Jul-2020 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) LM124DR SOIC D 14 2500 350.0 350.0 43.0 LM224ADR SOIC D 14 2500 333.2 345.9 28.6 LM224ADR SOIC D 14 2500 364.0 364.0 27.0 LM224ADR SOIC D 14 2500 367.0 367.0 38.0 LM224ADRG4 SOIC D 14 2500 367.0 367.0 38.0 LM224ADRG4 SOIC D 14 2500 333.2 345.9 28.6 LM224DR SOIC D 14 2500 364.0 364.0 27.0 LM224DR SOIC D 14 2500 367.0 367.0 38.0 LM224DRG3 SOIC D 14 2500 364.0 364.0 27.0 LM224DRG3 SOIC D 14 2500 333.2 345.9 28.6 LM224DRG4 SOIC D 14 2500 367.0 367.0 38.0 LM224KADR SOIC D 14 2500 367.0 367.0 38.0 LM224KDR SOIC D 14 2500 367.0 367.0 38.0 LM2902DR SOIC D 14 2500 333.2 345.9 28.6 LM2902DR SOIC D 14 2500 333.2 345.9 28.6 LM2902DR SOIC D 14 2500 364.0 364.0 27.0 LM2902DR SOIC D 14 2500 367.0 367.0 38.0 LM2902DRG3 SOIC D 14 2500 364.0 364.0 27.0 LM2902DRG4 SOIC D 14 2500 333.2 345.9 28.6 LM2902DRG4 SOIC D 14 2500 367.0 367.0 38.0 PackMaterials-Page3

PACKAGE MATERIALS INFORMATION www.ti.com 10-Jul-2020 Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) LM2902KAVQPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2902KAVQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM2902KDR SOIC D 14 2500 367.0 367.0 38.0 LM2902KNSR SO NS 14 2000 367.0 367.0 38.0 LM2902KPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2902KVQPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2902KVQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM2902NSR SO NS 14 2000 367.0 367.0 38.0 LM2902PWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2902PWR TSSOP PW 14 2000 364.0 364.0 27.0 LM2902PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0 LM2902PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM324ADR SOIC D 14 2500 367.0 367.0 38.0 LM324ADR SOIC D 14 2500 364.0 364.0 27.0 LM324ADRG4 SOIC D 14 2500 367.0 367.0 38.0 LM324ANSR SO NS 14 2000 367.0 367.0 38.0 LM324APWR TSSOP PW 14 2000 367.0 367.0 35.0 LM324APWR TSSOP PW 14 2000 364.0 364.0 27.0 LM324APWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM324DR SOIC D 14 2500 367.0 367.0 38.0 LM324DR SOIC D 14 2500 364.0 364.0 27.0 LM324DRG3 SOIC D 14 2500 364.0 364.0 27.0 LM324DRG3 SOIC D 14 2500 333.2 345.9 28.6 LM324DRG4 SOIC D 14 2500 367.0 367.0 38.0 LM324DRG4 SOIC D 14 2500 333.2 345.9 28.6 LM324KADR SOIC D 14 2500 367.0 367.0 38.0 LM324KANSR SO NS 14 2000 367.0 367.0 38.0 LM324KAPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM324KDR SOIC D 14 2500 367.0 367.0 38.0 LM324KNSR SO NS 14 2000 367.0 367.0 38.0 LM324KPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM324PWR TSSOP PW 14 2000 367.0 367.0 35.0 LM324PWR TSSOP PW 14 2000 364.0 364.0 27.0 LM324PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0 LM324PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 PackMaterials-Page4

None

None

None

None

PACKAGE OUTLINE J0014A CDIP - 5.08 mm max height SCALE 0.900 CERAMIC DUAL IN LINE PACKAGE PIN 1 ID A 4X .005 MIN (OPTIONAL) [0.13] .015-.060 TYP [0.38-1.52] 1 14 12X .100 [2.54] 14X .014-.026 14X .045-.065 [0.36-0.66] [1.15-1.65] .010 [0.25] C A B .754-.785 [19.15-19.94] 7 8 B .245-.283 .2 MAX TYP .13 MIN TYP [6.22-7.19] [5.08] [3.3] SEATING PLANE C .308-.314 [7.83-7.97] AT GAGE PLANE .015 GAGE PLANE [0.38] 0 -15 14X .008-.014 TYP [0.2-0.36] 4214771/A 05/2017 NOTES: 1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This package is hermitically sealed with a ceramic lid using glass frit. 4. Index point is provided on cap for terminal identification only and on press ceramic glass frit seal only. 5. Falls within MIL-STD-1835 and GDIP1-T14. www.ti.com

EXAMPLE BOARD LAYOUT J0014A CDIP - 5.08 mm max height CERAMIC DUAL IN LINE PACKAGE (.300 ) TYP [7.62] SEE DETAIL B SEE DETAIL A 1 14 12X (.100 ) [2.54] SYMM 14X ( .039) [1] 7 8 SYMM LAND PATTERN EXAMPLE NON-SOLDER MASK DEFINED SCALE: 5X .002 MAX (.063) [0.05] [1.6] METAL ALL AROUND ( .063) SOLDER MASK [1.6] OPENING METAL .002 MAX SOLDER MASK (R.002 ) TYP [0.05] OPENING [0.05] ALL AROUND DETAIL A DETAIL B SCALE: 15X 13X, SCALE: 15X 4214771/A 05/2017 www.ti.com

None

None

None

None

None

MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,65 0,15 M 0,22 28 15 0,25 0,09 5,60 8,20 5,00 7,40 Gage Plane 1 14 0,25 A 0°–(cid:1)8° 0,95 0,55 Seating Plane 2,00 MAX 0,05 MIN 0,10 PINS ** 14 16 20 24 28 30 38 DIM A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 4040065/E 12/01 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150 • POST OFFICE BOX 655303 DALLAS, TEXAS 75265

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated