Power entry modules without line filter KM https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Fuseholder 2-pole, Line Switch 1- or 2-pole Order required accessories separately KM with shield Snap-in version C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel mount : - Ultra-compact design. Small dimensions in front of and behind the pa- Snap-in version from front side nel - 3 Functions : - All single elements are already wired Appliance Inlet protection class I or II , Line Switch 2-pole , Fuseholder - For added safety "Extra-Safe" fuse drawers are available for fuse-links 5 x 20 mm 1- or 2-pole - Ideal for application with high transient loads - Meets the requirements of IEC 60335-1 for appliances in unattended - Suitable for use in equipment according to IEC/UL 60950 use. This includes the enhanced requirements of glow wire tests acc. Other versions on request to IEC 60695-2-12 and -13. - Fuse drawer 1-pole, plus spare fuse case - Quick connect terminals 4.8 x 0.8 mm - Fuse drawer 2-pole, with shorting bar - With cover on rear-side - Line switch 1-pole - Other rocker marking References Alternative: version with line filter KMF Alternative: version for screw mounting DD11 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, Ratings UL/CSA 10 A / 250 VAC; 60 Hz UL 60320-1, CSA C22.2 no. 60320-1 Dielectric Strength > 2.5 kVAC between L-N (for cold conditions) pin-temperature 70 > 3 kVAC between L/N-PE °C, 10 A, Protection Class I or II (1 min/50 Hz) Fuseholder 1 or 2 pole, Shocksafe category PC2 Allowable Operation Tempe- -25 °C to 70 °C acc. to IEC 60127-6, UL 498, rature for fuse-links 5 x 20 mm IP-Protection from front side IP 40 acc. to IEC 60529 Rated Power Acceptance @ 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per Ta 23 °C pole Insulation cover Suitable for appliances with protection Choose fuse-links for 2-pole version class I or II acc. to IEC 61140 in such a way that the typical power Terminal Quick connect terminals 4.8 x 0.8 mm acceptance is less than 1.4 W for each , tin-plated pole Panel Thickness S Snap-in: 1/1.5/2/2.5 mm Power Acceptance @ Ta > Admissible power acceptance at higher (all steps with one variant) 23°C ambient temperature see derating cur- Material: Housing Thermoplastic, black, UL 94V-0 ves Line Switch Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical Details Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 134485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER. Connectors 1

KM Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KM Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40046933 UL Approvals UL UL File Number: E93617 CQC Approvals CQC CCC Certificate Number: 2007010204227778, 2015180204000107 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 Connectors

Power entry modules without line filter KM https://www.schurter.com /PG05 Dimensions [mm] KM without shield 30.35 R1.5 25.7 L 0 N 50 46.8 +0.1047-0.05 R 0.3 max. 7 0. 1 S±0.05 30.5 3.2 26.15 2.5 27.8 28+-00..0150 KM with shield 30.4 R1.5 25.7 L 0 N 50 47.5 +0.1047.8-0.05 R 0.3 max. 7 0. 1 S±0.05 30.5 10 26.2 2.5 28.5 28.8+-00..0150 Diagrams with shield L L' 1) F1 2) PE PE' F2 N N' 1) Line 2) Load Connectors 3

KM Power entry modules without line filter https://www.schurter.com /PG05 Derating Curves 1-pole 2-pole n 2.0 n 1.4 e i e i 1.2 c c n n e power acceptaWatt 110...505 III === 10<..<07 IIInnn e power acceptaWatt per pole 0010....6408 III === 10<..<07 IIInnn bl bl si si 0.2 s s mi mi d 0.0 d 0.0 A 0 20 40 60 80 100 A 0 20 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C All Variants Protection Class Fuseholder Line Switch EMC-Shielding Order Number I 1-pole 2-pole - KM00.1205.11 █ I 2-pole 2-pole - KM00.1105.11 █ II 2-pole 2-pole - KM00.2105.11 █ I 1-pole 2-pole With EMC-shield and without line filter KM01.1205.11 █ I 2-pole 2-pole With EMC-shield and without line filter KM01.1105.11 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 50 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... 4 Connectors

Power entry modules without line filter KM https://www.schurter.com /PG05 Accessories Wire Harness Wire harness for SCHURTER products Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KM Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 IEC Connector C15 for hot conditions 120°C, Rewireable, Straight 4781 IEC Connector C15 for hot conditions 120°C, Rewireable, Angled 4784 Connector further types to KM ... 8 1 0 2 1. 1 8. 2 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S churter: KM01.1205.11 KM01.1105.11 KM00.1205.11 KM00.1105.11 KM00.1105.1101 KM00.1105.1102 KM00.2105.11