3 Watts xppower.com D C IZ Series - D • Regulated Single & Dual Output C • Wide 2:1 Input Range • SIP Package • 1600 VDC Isolation • Continuous Short Circuit Protection • Remote On/Off • 3 Year Warranty Specification Max Input No Load(1) Output Output Model EfficiencyCapacitive Input Voltage Input Current Voltage Current Number(2) Load Input Voltage Range • See table 65 mA 3.3 V 700 mA 74% 2200 µF IZ0503SA 70 mA 5.0 V 600 mA 76% 1000 µF IZ0505SA Input Reflected • 35 mA pk-pk through 12 µH inductor and 75 mA 12.0 V 250 mA 82% 470 µF IZ0512SA Ripple Current 47 µF capacitor, 5 Hz to 20 MHz 4.5-9.0 V 75 mA 15.0 V 200 mA 82% 220 µF IZ0515SA Input Filter • Capacitor 90 mA ±5.0 V ±300 mA 77% ±470 µF IZ0505S 90 mA ±12.0 V ±125 mA 81% ±220 µF IZ0512S Output 90 mA ±15.0 V ±100 mA 82% ±100 µF IZ0515S Output Voltage • See table 25 mA 3.3 V 700 mA 76% 2200 µF IZ1203SA 35 mA 5.0 V 600 mA 81% 1000 µF IZ1205SA Minimum Load • None(4) 35 mA 12.0 V 250 mA 84% 470 µF IZ1212SA Line Regulation • ±0.5% max 9.0-18.0 V 35 mA 15.0 V 200 mA 84% 220 µF IZ1215SA Load Regulation • ±1.0% max for a 25-100% load change 45 mA ±5.0 V ±300 mA 80% ±470 µF IZ1205S Setpoint Accuracy • ±1% max 45 mA ±12.0 V ±125 mA 83% ±220 µF IZ1212S Ripple & Noise • 75 mV pk-pk max, 20 MHz bandwidth 45 mA ±15.0 V ±100 mA 82% ±100 µF IZ1215S 15 mA 3.3 V 700 mA 74% 2200 µF IZ2403SA Short Circuit Protection • Continuous with auto recovery (foldback) 15 mA 5.0 V 600 mA 79% 1000 µF IZ2405SA Cross Regulation • ±5% on dual output models(5) 20 mA 12.0 V 250 mA 82% 470 µF IZ2412SA Remote On/Off • Apply 3-6 mA to pin 3 to turn off output. 1k 18.0-36.0 V 20 mA 15.0 V 200 mA 84% 220 µF IZ2415SA resistor between Pin 3 and Pin 1 (-Vin) will 20 mA ±5.0 V ±300 mA 80% ±470 µF IZ2405S create required current. 20 mA ±12.0 V ±125 mA 83% ±220 µF IZ2412S Temperature Coefficient• 0.02%/C 20 mA ±15.0 V ±100 mA 83% ±100 µF IZ2415S 10 mA 3.3 V 700 mA 75% 2200 µF IZ4803SA General 10 mA 5.0 V 600 mA 78% 1000 µF IZ4805SA 15 mA 12.0 V 250 mA 81% 470 µF IZ4812SA Efficiency • See table 36.0-72.0 V 15 mA 15.0 V 200 mA 81% 220 µF IZ4815SA Isolation Voltage • 1600 VDC 35 mA ±5.0 V ±300 mA 78% ±470 µF IZ4805S Isolation Resistance • 109 20 mA ±12.0 V ±125 mA 80% ±220 µF IZ4812S 20 mA ±15.0 V ±100 mA 81% ±100 µF IZ4815S Isolation Capacitance • 680Ω pF Switching Frequency • 100-650 kHz MTBF • >1.34 MHrs to MIL-HDBK-217F at 25 °C, GB Environmental Mechanical Details Operating Temperature • -40 °C to +100 °C, derate from 100% load 0.86 0.36 at +70 °C to 0% load at +100 °C (21.85) (9.20) Storage Temperature • -40 °C to +125 °C Case Temperature • +100 °C max 0.42 0.44 Cooling • Convection cooled (10.60) (11.10) 0.02 Safety (0.50) 0.12 (3.05) Safety Approvals • UL60950-1, CAN/CSA C22.2 No.60950-1, UL62368-1 0.10 (2.54) Notes 0.70 PIN CONNECTIONS 1. Measured at nominal input voltage. (17.78) Pin Single Dual 2. Minimum load of 25% required to meet load regulation & ripple & noise specifications. 1 -V Input -V Input 3. Operation at no load will not damage the part but it may not meet all specifications. (00..0520) (00..0520) 2 +V Input +V Input 4. When one output is set to 100% load and the other varies between 25-100% load. 3 Remote On/OffRemote On/Off 5. Pin pitch tolerance: ±0.014 (±0.35) 0 0.14 5 N.C. N.C. 6. Case tolerance: ±0.02 (±0.5) (09..3260)(3.50) 0.01 6 +V Output +V Output 7. Weight: SIP 0.009 lbs (3.9 g), DIP 0.013 lbs (5.9 g) 1 2 3 5 6 7 8 (0.25) 7 -V Output Common 8. All dimensions in inches (mm) 8 NC -V Output Bottom View 28 March 19 0 0