IR25604SPBF High and Low Side Driver Features Product Summary  Floating channel designed for bootstrap operation  Fully operational to +600V V 600V max. OFFSET  Tolerant to negative transient voltage  dV/dt immune I 200 mA / 350 mA O+/-  Gate drive supply range from 10 to 20V  Undervoltage lockout for both channels V 10 – 20V OUT  3.3V, 5V and 15V input logic compatible  Matched propagation delay for both channels Ton/off (typ.) 220 & 200 ns  Logic and power ground +/-5V offset  Lower di/dt gate driver for better noise immunity  Outputs in phase with inputs Description Package Options The IR25604 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can 8 Lead SOIC be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 V. Ordering Information Standard Pack Base Part Number Orderable Part Number Package Type Form Quantity IR25604SPBF SO8N Tube 95 IR25604SPBF IR25604SPBF SO8N Tape and Reel 2500 IR25604STRPBF 1 www.irf.com © 2013 International Rectifier

IR25604SPBF Typical Connection Diagram 2 www.irf.com © 2013 International Rectifier

IR25604SPBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units V High side floating absolute voltage -0.3 625 B V High side floating supply offset voltage V - 25 V + 0.3 S B B V High side floating output voltage V - 0.3 V + 0.3 HO S B V V Low side and logic fixed supply voltage -0.3 25 CC V Low side output voltage -0.3 V + 0.3 LO CC V Logic input voltage -0.3 V + 0.3 IN CC dVs/dt Allowable offset supply voltage transient — 50 V/ns PD Package power dissipation @ TA ≤ +25°C — 0.625 W RthJA Thermal resistance, junction to ambient — 200 °C/W T Junction temperature — 150 J °C T Storage temperature -55 150 S T Lead temperature (soldering, 10 seconds) — 300 L Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. The V offset rating is tested S with all supplies biased at 15V differential. Symbol Definition Min. Max. Units V High side floating supply absolute voltage V + 10 V + 20 B S S V High side floating supply offset voltage † 600 S V High side floating output voltage V V HO S B V V Low side and logic fixed supply voltage 10 20 CC V Low side output voltage 0 V LO CC V Logic input voltage 0 V IN CC T Ambient temperature -40 125 °C A † Logic operational for VS of -5 to +600V. Logic state held for VS of -5V to -VBS. (Please refer to Design Tip DT97-3 for more details). 3 www.irf.com © 2013 International Rectifier

IR25604SPBF Dynamic Electrical Characteristics V (V , V ) = 15V, CL = 1000 pF and T = 25°C unless otherwise specified. BIAS CC BS A Symbol Definition Min. Typ. Max. Units Test Conditions t Turn-on propagation delay — 220 300 V = 0V on S toff Turn-off propagation delay — 200 280 VS = 0V or 600V t Turn-on rise time — 150 220 ns V = 0V r S t Turn-off fall time — 50 80 V = 0V f S MT Delay matching, HS & LS turn-on/off — 0 30 Static Electrical Characteristics V (V , V ) = 15V and T = 25°C unless otherwise specified. The V , V and I parameters are BIAS CC BS A IN TH IN referenced to COM. The V and I parameters are referenced to COM and are applicable to the respective O O output leads: HO and LO. Symbol Definition Min. Typ. Max. Units Test Conditions V Logic ―1‖ input voltage 2.9 — — V = 10V to 20V IH CC V Logic ―0‖ input voltage — — 0.8 V = 10V to 20V IL CC V V High level output voltage, V - V — 0.8 1.4 I = 20 mA OH BIAS O O V Low level output voltage, V — 0.3 0.6 I = 20 mA OL O O I Offset supply leakage current — — 50 V = V = 600V LK B S I Quiescent V supply current 20 75 130 V = 0V or 5V QBS BS IN I Quiescent V supply current 60 120 180 μA V = 0V or 5V QCC CC IN I Logic ―1‖ input bias current — 5 20 V = 5V IN+ IN I Logic ―0‖ input bias current — — 2 V = 0V IN- IN VCCUV+ VCC and VBS supply undervoltage 8 8.9 9.8 V positive going threshold BSUV+ VCCUV- VCC and VBS supply undervoltage 7.4 8.2 9 V V negative going threshold BSUV- V CCUVH Hysteresis 0.3 0.7 --- V BSUVH Output high short circuit pulsed V = 0V I 120 200 — O O+ current PW ≤ 10 μs mA Output low short circuit pulsed V = 15V I 250 350 — O O- current PW ≤ 10 μs 4 www.irf.com © 2013 International Rectifier

IR25604SPBF Functional Block Diagram 5 www.irf.com © 2013 International Rectifier

IR25604SPBF Lead Definitions Symbol Description HIN Logic input for high side gate driver outputs (HO), in phase LIN Logic input for high side gate driver outputs (LO), in phase V High side floating supply B HO High side gate drive output V High side floating supply return S V Low side and logic fixed supply CC LO Low side gate drive output COM Low side return Lead Assignments 1 V V 8 CC B 2 HIN HO 7 3 LIN V 6 S 4 COM LO 5 6 www.irf.com © 2013 International Rectifier

IR25604SPBF Application Information and Additional Details Figure 1. Input/Output Timing Diagram Figure 2. Switching Time Waveform Definitions Figure 3. Delay Matching Waveform Definitions 7 www.irf.com © 2013 International Rectifier

IR25604SPBF 8 www.irf.com © 2013 International Rectifier

IR25604SPBF 9 www.irf.com © 2013 International Rectifier

IR25604SPBF 10 www.irf.com © 2013 International Rectifier

IR25604SPBF 11 www.irf.com © 2013 International Rectifier

IR25604SPBF 12 www.irf.com © 2013 International Rectifier

IR25604SPBF 13 www.irf.com © 2013 International Rectifier

IR25604SPBF 14 www.irf.com © 2013 International Rectifier

IR25604SPBF 15 www.irf.com © 2013 International Rectifier

IR25604SPBF 16 www.irf.com © 2013 International Rectifier

IR25604SPBF Package Details 17 www.irf.com © 2013 International Rectifier

IR25604SPBF Tape and Reel Details LOADED TAPE FEED DIRECTION B AA H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D B C A E G H REEL DIMENSIONS FOR 8SOICN Metric Imperial Code Min Max Min Max A 329.60 330.25 12.976 13.001 B 20.95 21.45 0.824 0.844 C 12.80 13.20 0.503 0.519 D 1.95 2.45 0.767 0.096 E 98.00 102.00 3.858 4.015 F n/a 18.40 n/a 0.724 G 14.50 17.10 0.570 0.673 H 12.40 14.40 0.488 0.566 18 www.irf.com © 2013 International Rectifier

IR25604SPBF Part Marking Information Part number IRxxxxx YWW ? Date code IR logo Pin 1 ? XXXX Lot Code Identifier (Prod mode – 4 digit SPN cod e) ? M ARKING CODE P Lead Free Released Assembly site code Non-Lead Free Rele ased Per SCOP 200-002 19 www.irf.com © 2013 International Rectifier

IR25604SPBF Qualification Information† Industrial†† (per JEDEC JESD 47) Qualification Level Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. MSL2††† Moisture Sensitivity Level (per IPC/JEDEC J-STD-020) RoHS Compliant Yes † Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ †† Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 20 www.irf.com © 2013 International Rectifier

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I nfineon: IR25604SPBF IR25604STRPBF