IHLP-5050CE-01 www.vishay.com Vishay Dale IHLP® Commercial Inductors, High Saturation Series FEATURES • Lowest height (3.5 mm) in this package footprint • Shielded construction • Frequency range up to 5.0 MHz • Lowest DCR/μH, in this package size • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction DESIGN SUPPORT TOOLS click logo to get started • IHLP design. PATENT(S): www.vishay.com/patents • Material categorization: for definitions of compliance Models Design Tools please see www.vishay.com/doc?99912 Available Available APPLICATIONS • PDA / notebook / desktop / server applications STANDARD ELECTRICAL SPECIFICATIONS • High current POL converters • Low profile, high current power supplies L HEAT 0 • Battery powered devices INDUCTANCE DCR DCR RATING SATURATION • DC/DC converters in distributed power systems ± 20 % AT 100 kHz, TYP. MAX. CURRENT CURRENT 0.25 V, 0 A 25 °C 25 °C DC TYP. DC TYP. • DC/DC converter for Field Programmable Gate Array (FPGA) (μH) (mΩ) (mΩ) (A) (1) (A) (2) DIMENSIONS in inches [millimeters] 0.10 0.8 0.96 43 84 0.15 1 1.2 41 75 0.22 1.1 1.3 38.5 65 0.508 Typical Pad Layout 0.33 1.3 1.5 36.5 62 [12.9] Max. 0.47 1.6 2 32 55 0.580 0.60 1.8 2.2 29 51 [14.732] 0.68 2.3 2.5 28 49 0.138 0.195 [4.95] 0.82 2.6 3 25 44 [3.5] Max. 0[.20.931 ± ± 0 0.3.0]1 0.325 1.0 3.3 3.5 24 40 [8.255] 1.5 5.1 5.5 19 35 1.8 6.5 7 16.5 30 2.2 7.2 8 16 29 0.185 ± 0.01 3.3 11 12 12 27 [4.7 ± 0.3] 4.7 14.3 15 10 24 0.520 ± 0.015 [13.2 ± 0.38] Max. This diagram applies to values 0.6 µH and below. 5.6 18.3 19 9.5 19 6.8 19.8 22 9 18 8.2 24.8 28 8.5 16 0.508 Typical Pad Layout 10 30.4 34 7 14 [12.9] Max. Notes 0.575 [14.605] • All test data is referenced to 25 °C ambient • Operating temperature range -55 °C to +125 °C [3.05.]1 M38ax. 0.087 ± 0.01 0.128 [3.3] 0.325 • The part temperature (ambient + temp. rise) should not exceed [2.2 ± 0.254] [8.255] 125 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 0.118 ± 0.01 • Rated operating voltage (across inductor) = 75 V [3.0 ± 0.3] (1) DC current (A) that will cause an approximate ΔT of 40 °C 0.520 ± 0.015 (2) DC current (A) that will cause L0 to drop approximately 20 % [13.2 ± 0.38] This diagram applies to values 0.68 µH and above. DESCRIPTION IHLP-5050CE-01 1.0 μH ± 20 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H L P 5 0 5 0 C E E R 1 R 0 M 0 1 PRODUCT FAMILY SIZE PACKAGE INDUCTANCE TOL. SERIES CODE VALUE PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Revision: 07-Jun-17 1 Document Number: 34105 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IHLP-5050CE-01 www.vishay.com Vishay Dale PERFORMANCE GRAPHS 0.10 μH 0.15 μH 0.12 100 0.25 100 ΔT °C ΔT °C 0.11 INDUCTANCE (μH) 0000....00109807 L 84260000 TEMPERATURE (°C) INDUCTANCE (μH) 0000....11023791 L 42680000 TEMPERATURE (°C) 0.06 0.05 0 0.05 0 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 DC CURRENT (A) DC CURRENT (A) 0.22 μH 0.33 μH 0.25 100 0.50 100 ΔT °C ΔT °C CE (μH) 00..2105 L 6800 URE (°C) CE (μH) 00..4300 6800 URE (°C) N T N T A A A L A CT 0.10 40 ER CT 0.20 40 ER U P U P D M D M N E N E I 0.05 20 T I 0.10 20 T 0.00 0 0.00 0 0 10 20 30 40 50 60 0 10 20 30 40 50 60 DC CURRENT (A) DC CURRENT (A) 0.47 μH 0.60 μH 0.8 100 1.0 100 ΔT °C ΔT °C E (μH) 0.6 6800 RE (°C) E (μH) 00..86 6800 RE (°C) C L U C U AN 0.4 AT AN L AT CT 40 ER CT 0.4 40 ER U P U P D M D M N 0.2 E N E I 20 T I 0.2 20 T 0 0 0 0 0 10 20 30 40 50 60 0 10 20 30 40 50 60 DC CURRENT (A) DC CURRENT (A) 0.68 μH 0.82 μH 1.0 100 1.2 100 ΔT °C ΔT °C H) 0.8 80 C) H) 1.0 80 C) DUCTANCE (μ 00..64 L 4600 MPERATURE (° DUCTANCE (μ 000...864 L 4600 MPERATURE (° IN 0.2 20 TE IN 0.2 20 TE 0 0 0 0 0 10 20 30 40 50 60 0 10 20 30 40 50 DC CURRENT (A) DC CURRENT (A) Revision: 07-Jun-17 2 Document Number: 34105 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IHLP-5050CE-01 www.vishay.com Vishay Dale PERFORMANCE GRAPHS 1.0 μH 1.5 μH 1.4 ΔT °C 100 21..08 ΔT °C 100 1.2 H) 80 C) H) 1.6 80 C) ANCE (μ 01..80 L 60 ATURE (° ANCE (μ 111...024 L 60 ATURE (° UCT 0.6 40 PER UCT 0.8 40 PER IND 0.4 20 TEM IND 00..64 20 TEM 0.2 0.2 0 0 0 0 0 10 20 30 40 50 0 10 20 30 40 50 DC CURRENT (A) DC CURRENT (A) 1.8 μH 2.2 μH 3.0 100 3.0 100 ΔT °C ΔT °C CE (μH) 22..05 6800 URE (°C) CE (μH) 22..05 L 6800 URE (°C) AN 1.5 L AT AN 1.5 AT T R T R DUC 1.0 40 MPE DUC 1.0 40 MPE N E N E I 0.5 20 T I 0.5 20 T 0.0 0 0 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 35 DC CURRENT (A) DC CURRENT (A) 3.3 μH 4.7 μH 4.0 100 6.0 100 3.6 ΔT °C 5.5 ΔT °C 5.0 INDUCTANCE (μH) 1122230.......6204828 L 42680000 TEMPERATURE (°C) INDUCTANCE (μH) 21214343........50050550 L 42680000 TEMPERATURE (°C) 0.4 0.5 0 0 0 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 DC CURRENT (A) DC CURRENT (A) 5.6 μH 6.8 μH 8 100 12.0 100 ΔT °C 7 ΔT °C H) 6 80 C) H) 10.0 80 C) INDUCTANCE (μ 4532 L 426000 TEMPERATURE (° INDUCTANCE (μ 4628....0000 L 426000 TEMPERATURE (° 1 0 0 0.0 0 0 5 10 15 20 25 0 5 10 15 20 DC CURRENT (A) DC CURRENT (A) Revision: 07-Jun-17 3 Document Number: 34105 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IHLP-5050CE-01 www.vishay.com Vishay Dale PERFORMANCE GRAPHS 8.2 μH 10 μH 12.0 100 16.0 100 ΔT °C ΔT °C 10.0 14.0 ANCE (μH) 86..00 L 6800 ATURE (°C) ANCE (μH) 1102..00 6800 ATURE (°C) DUCT 4.0 40 MPER DUCT 8.0 L 40 MPER IN 2.0 20 TE IN 6.0 20 TE 0.0 0 4.0 0 0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14 DC CURRENT (A) DC CURRENT (A) Revision: 07-Jun-17 4 Document Number: 34105 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000