HMC695LP4 / HMC695LP4E v02.0212 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER 11.4 - 13.2 GHz OUTPUT Typical Applications Features the HMc695lp4(e) is ideal for: Output power: +7 dBm t • Fiber Optic Applications Sub-Harmonic Suppression: >25 dBc M • Point-to-Point Radios SSB phase noise: -140 dBc/Hz S • Military Radar Single Supply: +5v @ 60 mA - e 24 lead 4x4 mm SMt package: 16 mm2 v i t Functional Diagram General Description c A the HMc695lp4(e) are active miniature x4 frequ- - ency multipliers utilizing inGap GaAs HBt technology r in 4x4 mm leadless surface mount packages. power e output is +7 dBm typical from a +5v supply voltage i l and varies little vs. input power, temperature and sup- p ply voltage. Suppression of undesired fundamental i t and sub-harmonics is >25 dBc typical with respect l to output signal level. the low additive SSB phase u noise of -140 dBc/Hz at 100 kHz offset helps the M user maintain good system noise performance. the y HMc695lp4(e) are ideal for use in lO multiplier c chains allowing reduced parts count vs. traditional n approaches. e u q e r F Electrical Specifications, T = +25° C, Vcc= 5V A parameter Min. typ. Max. units Frequency range, input 2.85 - 3.3 GHz Frequency range, Output 11.4 - 13.2 GHz input power range -15 5 dBm Output power 2 7 dBm Sub-Harmonic Suppression 25 dBc input return loss 15 dB Output return loss 8 dB SSB phase noise (100 kHz Offset) pin= 0 dBm -140 dBc/Hz Supply current (icc) 60 75 mA InFfoormra tpiorni cfuern,is hdeed lbivy eArnyal oag nDdev itcoes pisl abcelieev eodr dto ebres a: cHcuirtatteit ean dM reicliarbolew. Haovweev eCr, onor poFroart ipornic,e 2, dEelliivzearby,e atnhd D tor ivpela,c eC horedlemrss: fAonradl,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC695LP4 / HMC695LP4E v02.0212 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER 11.4 - 13.2 GHz OUTPUT Output Power vs. Temperature @ -10 dBm Drive Level Output Power vs. Drive Level 10 10 t 8 8 M m) m) S B 6 B 6 d d R ( R ( - POWE 4 ++-428055 CCC POWE 4 ---211050 dddBBBmmm ve -5 dBm 2 2 + 05 ddBBmm ti c 0 0 A 11 11.5 12 12.5 13 13.5 14 11 11.5 12 12.5 13 13.5 14 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) - r e Output Power vs. i l Supply Voltage @ -10 dBm Drive Level Input Return Loss vs. Temperature p 10 0 i t l -5 8 +25 C u R (dBm) 6 LOSS (dB)--1150 +-4805 CC y M OWE 4 VVcccc==45..50VV URN c P Vcc=5.5V ET-20 n R 2 e -25 u 0 -30 q 11 11.5 12 12.5 13 13.5 14 2 2.5 3 3.5 4 4.5 5 e OUTPUT FREQUENCY (GHz) FREQUENCY (GHz) r F Output Return Loss vs. Temperature Harmonics @ -10 dBm Drive Level 0 Fout 5Fin 30 1Fin 6Fin 2Fin 7Fin 3Fin 8Fin -5 m) 10 OSS (dB) WER (dB-10 L-10 O URN UT P-30 T P RE-15 ++2855 CC OUT -40 C -50 -20 -70 8 10 12 14 16 2.75 3 3.25 3.5 FREQUENCY (GHz) INPUT FREQUENCY (GHz) InFfoormra tpiorni cfuern,is hdeed lbivy eArnyal oag nDdev itcoes pisl abcelieev eodr dto ebres a: cHcuirtatteit ean dM reicliarbolew. Haovweev eCr, onor poFroart ipornic,e 2, dEelliivzearby,e atnhd D tor ivpela,c eC horedlemrss: fAonradl,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC695LP4 / HMC695LP4E v02.0212 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER 11.4 - 13.2 GHz OUTPUT SSB Phase Noise SSB Phase Noise @ Pin = 0 dBm @ 12.5 GHz @ Pin = -10 dBm @ 12.5 GHz 0 0 t -20 -20 M c/Hz) -40 c/Hz) -40 B B S E (d -60 E (d -60 S S - OI -80 OI -80 N N e E E S-100 S-100 A A v H H i B P-120 B P-120 t S S S-140 S-140 c A -160 -160 102 103 104 105 106 107 102 103 104 105 106 107 - OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz) r e i l Absolute Maximum Ratings Typical Supply Current vs. Vcc p i rF input (vcc= +5v) +20 dBm vcc (v) icc (mA) t l vcc +5.5v 4.75 59 u channel temperature 135 °c 5.00 60 M continuous pdiss (t=85 °c) 5.25 61 538 mW y (derate 10.8 mW/°c above 85 °c) Note: Multiplier will operate over full voltage range shown thermal resistance (r ) above. c th 93 °c/W (junction to ground paddle) n Storage temperature -65 to +150 °c e Operating temperature -40 to +85 °c electrOStAtic SenSitive Device u OBServe HAnDlinG precAutiOnS eSD Sensitivity (HBM) class 1B q e r F InFfoormra tpiorni cfuern,is hdeed lbivy eArnyal oag nDdev itcoes pisl abcelieev eodr dto ebres a: cHcuirtatteit ean dM reicliarbolew. Haovweev eCr, onor poFroart ipornic,e 2, dEelliivzearby,e atnhd D tor ivpela,c eC horedlemrss: fAonradl,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC695LP4 / HMC695LP4E v02.0212 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER 11.4 - 13.2 GHz OUTPUT Outline Drawing t M S - e v i t c A - r e i l p i t l nOteS: u 1. leADFrAMe MAteriAl: cOpper AllOy M 2. DiMenSiOnS Are in incHeS [MilliMeterS] 3. leAD SpAcinG tOlerAnce iS nOn-cuMulAtive. y 4. pAD Burr lenGtH SHAll Be 0.15mm MAXiMuM. c pAD Burr HeiGHt SHAll Be 0.05mm MAXiMuM. 5. pAcKAGe WArp SHAll nOt eXceeD 0.05mm. n 6. All GrOunD leADS AnD GrOunD pADDle MuSt Be e SOlDereD tO pcB rF GrOunD. u 7. reFer tO Hittite ApplicAtiOn nOte FOr SuGGeSteD q lAnD pAttern. e r F Package Information part number package Body Material lead Finish MSl rating package Marking [3] HMc695lp4 low Stress injection Molded plastic Sn/pb Solder MSl1 [1] H695 XXXX HMc695lp4e roHS-compliant low Stress injection Molded plastic 100% matte Sn MSl1 [2] H695 XXXX [1] Max peak reflow temperature of 235 °c [2] Max peak reflow temperature of 260 °c [3] 4-Digit lot number XXXX InFfoormra tpiorni cfuern,is hdeed lbivy eArnyal oag nDdev itcoes pisl abcelieev eodr dto ebres a: cHcuirtatteit ean dM reicliarbolew. Haovweev eCr, onor poFroart ipornic,e 2, dEelliivzearby,e atnhd D tor ivpela,c eC horedlemrss: fAonradl,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC695LP4 / HMC695LP4E v02.0212 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER 11.4 - 13.2 GHz OUTPUT Pin Description pin number Function Description interface Schematic t the pins are not connected internally; however, all 1, 2, 5 - 14, M 17, 18, 20 - 24 n/c data shown herein was measured with these pins connected to rF/Dc ground externally. S - rF input needs to be Dc blocked only if there is an 3 rFin e external Dc voltage applied to rFin. v i t All ground leads and ground paddle 4, 15 GnD c must be soldered to pcB rF/Dc ground. A Multiplied Output. Ac coupled. 16 rFOut - no external Dc blocks necessary. r 19 vcc Supply voltage 5v e i l p i t l u M y c n e u q e r F InFfoormra tpiorni cfuern,is hdeed lbivy eArnyal oag nDdev itcoes pisl abcelieev eodr dto ebres a: cHcuirtatteit ean dM reicliarbolew. Haovweev eCr, onor poFroart ipornic,e 2, dEelliivzearby,e atnhd D tor ivpela,c eC horedlemrss: fAonradl,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC695LP4 / HMC695LP4E v02.0212 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER 11.4 - 13.2 GHz OUTPUT Evaluation PCB t M S - e v i t c A - r e i l p i t l u M y c n e u q e r F List of Materials for Evaluation PCB 106137 [1] the circuit board used in the application should be item Description generated with proper rF circuit design techniques. J1 - J3 pcB Mount SMA connector Signal lines should have 50 ohm impedance while c1 1,000 pF capacitor, 0603 pkg. the package ground leads and exposed paddle u1 HMc695lp4(e) x4 Active Multiplier should be connected directly to the ground plane pcB [2] 104610 eval Board similar to that shown. the evaluation circuit board [1] reference this number when ordering complete evaluation pcB shown is available from Hittite upon request. [2] circuit Board Material: Arlon 25Fr or rogers 4350 InFfoormra tpiorni cfuern,is hdeed lbivy eArnyal oag nDdev itcoes pisl abcelieev eodr dto ebres a: cHcuirtatteit ean dM reicliarbolew. Haovweev eCr, onor poFroart ipornic,e 2, dEelliivzearby,e atnhd D tor ivpela,c eC horedlemrss: fAonradl,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D