HMC547LP3 / 547LP3E v02.0612 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20 GHz Typical Applications Features the hMc547LP3 & hMc547LP3e is ideal for: high isolation: >50 dB up to 5 Ghz t • Basestation Infrastructure >45 dB up to 15 Ghz M Low insertion Loss: 1.6 dB @ 10 Ghz • Fiber Optics & Broadband Telecom S 2 dB @ 20 Ghz • Microwave Radio & VSAT - Fast Switching t • Military Radios, Radar, & ecM Non-Reflective Design D • Test Instrumentation P QFN SMt Package, 9 mm2 S - Functional Diagram General Description S e the hMc547LP3 & hMc547LP3e are general pur- h pose broadband high isolation non-reflective GaAs c MeSFet SPDt switches in low cost leadless QFN t surface mount plastic packages. covering Dc to i w 20 Ghz, the switch offers high isolation and low insertion loss. the switch features >50 dB isolation S up to 5 Ghz and >45 dB isolation up to 15 Ghz. the switch operates using complementary negative con-trol voltage logic lines of -5/0V and requires no bias supply. the hMc547LP3 & hMc547LP3e are packaged in leadless QFN 3x3 mm surface mount packages. Electrical Specifications, T = +25° C, With 0/-5V Control, 50 Ohm System A Parameter Frequency Min. typ. Max. Units Dc - 6.0 Ghz 1.5 1.9 dB Dc - 10.0 Ghz 1.6 2.0 dB insertion Loss Dc - 15.0 Ghz 1.8 2.2 dB Dc - 20.0 Ghz 2.0 2.5 dB Dc - 6.0 Ghz 45 50 dB isolation Dc - 15.0 Ghz 40 45 dB Dc - 20.0 Ghz 33 38 dB Return Loss “On State” Dc - 20.0 Ghz 17 dB Dc - 6.0 Ghz 25 dB Return Loss RF1, RF2 “Off State” Dc - 15.0 Ghz 17 dB Dc - 20.0 Ghz 13 dB input Power for 1 dB compression 0.5 - 20.0 Ghz 20 23 dBm Input Third Order Intercept 0.5 - 10.0 Ghz 48 dBm (two-tone input Power= +7 dBm each tone) 0.5 - 20.0 Ghz 45 dBm Switching characteristics tRiSe, tFALL (10/90% RF) Dc - 20 Ghz 3 ns tON, tOFF (50% CTL to 10/90% RF) 6 ns InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LP3 / 547LP3E v02.0612 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20 GHz Insertion Loss Return Loss 0 0 -5 t dB) -1 B)-10 RRRFFFC11,,RRFF22 OONFF M OSS ( -2 SS (d-15 S L O - ON N L-20 t NSERTI -3 +25 C RETUR-25 PD I -4 +85 C -40 C -30 S -5 -35 - 0 5 10 15 20 25 0 5 10 15 20 25 S FREQUENCY (GHz) FREQUENCY (GHz) e h c Isolation Between Ports RFC and RF1/RF2 Isolation Between Ports RF1 and RF2 t i 0 0 w -10 -10 S -20 -20 RF2 PATH ON RF1 RF1 PATH ON B) RF2 B) d-30 d-30 N ( N ( O-40 O-40 TI TI A A OL-50 OL-50 S S I-60 I-60 -70 -70 -80 -80 0 5 10 15 20 25 0 5 10 15 20 25 FREQUENCY (GHz) FREQUENCY (GHz) Input P1dB and P0.1dB Compression Point Input Third Order Intercept Point 30 55 m) 50 B dB (d 25 m) 45 0.1 dB ND P 20 P3 ( 40 B A UT I +25 C UT P1d 15 PP01.d1BdB INP 35 +-4805 CC P 30 N I 10 25 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) FREQUENCY (GHz) InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LP3 / 547LP3E v02.0612 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20 GHz Absolute Maximum Ratings Control Voltages RF input Power (Vctl = -5V) +30 dBm State Bias condition t control Voltage Range (A & B) +0.5V to -7.5 V Low 0 to -0.5V @ 10 uA Max. M hot Switch Power Level high -5V @ 3 uA typ. to -7V @ 10 uA typ. (± 0.5 V) +23 dBm (Vctl = -5V) S channel temperature 150 °c Truth Table - continuous Pdiss (t=85°c) t 0.26 w (derate 4 mw/°c about 85°c) control input Signal Path State D P t(inhseermrtiaoln R Leossisst aPnacthe) 420 °c/w A B RFc to RF1 RFc to RF2 S high Low On Off thermal Resistance (terminated Path) 250 °c/w Low high Off On - S Storage temperature -65 to +150 °c e Operating Temperature -40 to +85 °c ELECTROSTATIC SENSITIVE DEVICE h eSD Sensitivity (hBM) class 1A OBSERVE HANDLING PRECAUTIONS c t i w S InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LP3 / 547LP3E v02.0612 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20 GHz Outline Drawing t M S - t D P S - S e h NOTES: c 1. LEADFRAME MATERIAL: COPPER ALLOY t 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] i 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE w 4. PAD BURR LeNGth ShALL Be 0.15mm MAXiMUM. S PAD BURR heiGht ShALL Be 0.05mm MAXiMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED LAND PAtteRN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] hMc547LP3 Low Stress injection Molded Plastic Sn/Pb Solder MSL1 [1] 547 XXXX hMc547LP3e RohS-compliant Low Stress injection Molded Plastic 100% matte Sn MSL1 [2] 547 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LP3 / 547LP3E v02.0612 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20 GHz Pin Descriptions Pin Number Function Description interface Schematic t this pin should be connected to PcB RF ground to M 1, 5, 9, 12, 16 N/c maximize isolation S Package bottom has exposed metal paddle that must also - 2, 4, 6, 8, 13, 15 GND be connected to PcB RF ground. t D This pin is DC coupled and matched to 50 Ohm. Blocking 3, 7, 14 RFc, RF1, RF2 P capacitors are required if RF line potential is not equal to 0V. S 10 B See truth table and control voltage table. - S e 11 A See truth table and control voltage table. h c t Suggested Driver Circuit i w S InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LP3 / 547LP3E v02.0612 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 20 GHz Evaluation PCB t M S - t D P S - S e h c t i w S List of Materials for Evaluation PCB 105711 [1] the circuit board used in the application should be item Description generated with proper RF circuit design techniques. J1 - J3 PcB Mount SRi SMA connector Signal lines at the RF port should have 50 Ohm J4 - J6 Dc Pin impedance and the package ground leads and R1 - R2 100 Ohm Resistor, 0603 Pkg. package bottom should be connected directly to hMc547LP3 / hMc547LP3e U1 SPDt Switch the ground plane similar to that shown above. the PcB [2] 107521 evaluation PcB evaluation circuit board shown above is available [1] Reference this number when ordering complete evaluation PCB from hittite Microwave corporation upon request. [2] Circuit Board Material: Rogers 4350 InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D