High Power High Performance Molded Surface Mount Inductors MODEL HM72E-06 • Operating & Storage Temperature -40°C to +155°C • Temperature Rise, Maximum 50°C • Operating Frequency Up to 3MHz Specifications @ 25°C Inductance(1) Heating Isat(3) DCR (mΩ) Part Number Current(2) μH±20% (Adc) (Adc) Typ. Max. HM72E-06R10LF 0.10 26.2 45.0 1.5 1.7 HM72E-06R20LF 0.20 20.3 34.0 2.5 2.8 HM72E-06R33LF 0.33 18.0 22.0 3.2 3.9 HM72E-06R47LF 0.47 16.1 19.0 4.0 4.2 HM72E-06R68LF 0.68 14.4 16.5 5.0 5.5 HM72E-061R0LF 1.00 10.3 15.0 9.0 10.0 HM72E-061R5LF 1.50 8.4 10.0 13.0 14.0 HM72E-062R2LF 2.20 8.3 8.5 18.0 20.0 HM72E-063R3LF 3.30 6.6 8.0 26.5 30.0 HM72E-064R7LF 4.70 5.4 6.5 39.0 42.0 HM72E-06330LF 33.0 1.8 2.5 302.0 332.0 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155°C. Mechanical Outline Dimensions (mm) Recommended Top View Side View Bottom View PCB layout General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com © TT electronics plc 07.13

High Power High Performance Molded Surface Mount Inductors MODEL HM72E-06 Electrical Characteristic @ 25°C L Vs I 4.800 4.600 4.400 06R10 4.200 4.000 06R20 3.800 06R33 ) 3.600 H 3.400 06R47 u 3.200 E ( 3.000 06R68 C 2.800 061R0 N 2.600 TA 2.400 061R5 UC 2.200 062R2 2.000 D 1.800 063R3 N 1.600 I 064R7 1.400 1.200 1.000 0.800 0.600 0.400 0.200 0.000 0 2 3 4 5 6 8 9 10 12 14 15 16 18 20 21 22 24 25 26 27 28 30 33 35 36 40 45 50 55 60 65 DC CURRENT (A) Packing / Ordering Information One reel (13”) 2000 pcs One shipping carton (6 reels) 12000 pcs HM72E - 06 R33 LF TR13 Model Series 13” tape & reel packing Case Size: Lead Free Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10μH, “R” denotes the decimal point. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com © TT electronics plc 07.13